Skip to the content

Boards using the TPS63020DSJR

44 boards

Boards in 40 GitHub repositories, designed in KiCad, that use the TPS63020DSJR by Texas Instruments (-40℃~+85℃@(TA) 1 1.2V~5.5V 1.8V~5.5V 2.4MHz 3A 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-14-EP(3x4) DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TPS63020DSJR’s symbol, footprint and pinout are on its own page.

  • 2 layers100.3 × 69.9 mmHDD Synth Prototype MK5, the printed circuit board in 3D

    HDD Synth Prototype MK5

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    112 parts16
  • 6 layers71.1 × 168.4 mmMeshtonic h4m v2, the printed circuit board in 3D

    Meshtonic h4m v2

    Josephrp/meshtonic

    Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic

    118 parts11
  • 2 layers35.1 × 28.9 mmBms buck boost, the printed circuit board in 3D

    Bms buck boost

    tor1kk/bms-buck-boost

    Battery Management System (BMS) with Buck-Boost Converter

    38 parts10GPL-3.0
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 4 layers85.9 × 50 mmLogic, the printed circuit board in 3D

    Logic

    FallenBuillder/rfid-nfc-manager

    This repository consists of schematics, PCB layouts, code and 3D models for a rfid,nfc manager.

    136 parts3MIT
  • 4 layers61 × 88.9 mmStm32-battery, the printed circuit board in 3D

    Stm32-battery

    agrif/bluegrass

    an STM32 board with on-board battery charging

    117 parts2
  • 4 layers85 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    29 parts2
  • 4 layers95 × 86 mmKami, the printed circuit board in 3D

    Kami

    Nicolai-Electronics/kami-hardware

    Kami is a modernized re-imagining of the SHA2017 epaper badge by Badge.Team.

    118 parts2CERN-OHL-P-2.0
  • 4 layers26.4 × 50.8 mmIOT, the printed circuit board in 3D

    IOT

    yuanyong2024/IoT-feather

    a IoT evb board that based on Quectel BG95 modem and in adafruit feather form factor

    111 parts2
  • 4 layers94 × 28 mmLux, the printed circuit board in 3D

    Lux

    Erox-02/Luxion

    Luxion is a custom made drone made with rust unlike standard c++ drones . It uses a custom pcb, ESP32-S3-WROOM-1U , MPU6500-IMU(breakout as it costs less than the bare), four motor drivers, and a 1S LiPo to power the…

    50 parts1GPL-3.0
  • 4 layers90 × 90 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Han-ZenX/CLOCK

    High-precision frequency meter clock generation module

    162 parts1
  • 2 layers25.7 × 21 mmEsp pmc, the printed circuit board in 3D

    Esp pmc

    ldab/esp-battery-pmb

    ESP32, ESP8266 and the likes Battery Management Board, Power your device with a single Battery or 2xAAA. With a buit-in Boost and Buck converter + Nano Timer - Sleep Current < 1uA.

    27 parts1MIT
  • 2 layers60 × 40 mmB TPS63020 EVAL Brk R1.0, the printed circuit board in 3D

    B TPS63020 EVAL Brk R1.0

    Boardoza/Boardoza_TPS63020_Buck_Boost_Converter_Evaluation_Board

    High-efficiency buck-boost converter evaluation board using TI TPS63020, supporting 1.8V–5.5V input and multiple selectable output voltages up to 5V.

    38 partsCC-BY-SA-4.0
  • 4 layers89 × 81 mmDKWS PCB, the printed circuit board in 3D

    DKWS PCB

    danielkluka/Diploma-Thesis

    Design of a Secure Data Transmission System in NB-IoT Environment

    121 partsMIT
  • 2 layers147.9 × 160 mmDoper Dactyl, the printed circuit board in 3D

    Doper Dactyl

    Dopernieux/dactyl-manuform-wireless

    Ergonomic split mechanical keyboard - Dactyl Manuform BLE Flex PCB project

    102 parts
  • 4 layers66 × 40 mmESP32 PRELIM DESIGN, the printed circuit board in 3D

    ESP32 PRELIM DESIGN

    ece49022-team9/slate

    Keep the team's native schematic and board sources here, including any project-specific libraries needed to open them.

    82 parts
  • 4 layers40.1 × 60.5 mmHIVES360, the printed circuit board in 3D

    HIVES360

    GhanmiIyed/Beehive-Monitoring

    96 parts
  • 4 layers76.2 × 66 mmRtk, the printed circuit board in 3D

    Rtk

    GM4AJK/gps-staff

    Surveyors GPS Staff - GPS/RTK Staff Positioning

    91 partsMIT
  • 2 layers134.5 × 87 mmBattery monitor, the printed circuit board in 3D

    Battery monitor

    kaushalch1/battery-monitor

    CellCheck is a battery discharge analyzer designed to measure battery voltage, current, power, temperature, estimated capacity, energy, and approximate internal resistance.

    56 parts
  • 4 layers99 × 80 mmHandheld, the printed circuit board in 3D

    Handheld

    lewipewi/esp-32-gaming-console

    A custom PCB handheld built to run Game Boy games, inspired by the original DMG. Designed from scratch in KiCad — schematic, layout, BOM and firmware.

    61 parts
  • 4 layers12.2 × 50.4 mmCompass v1, the printed circuit board in 3D

    Compass v1

    mszkowalik/7S_Compass_v1_board

    BLE Long range + mesh? https://github.com/jnsbyr/nrf52-ble-test

    146 parts
  • 4 layers110 × 30.5 mmFitLensPCB, the printed circuit board in 3D

    FitLensPCB

    nabudahab/FitLensPCB

    FitLens Senior Design PCB

    107 parts
  • 8 layers50 × 50 mmStella Ignis, the printed circuit board in 3D

    Stella Ignis

    roquemt/STeYe

    Flight computer for rockets

    113 parts