2 layers14.2 × 15.4 mm
4 layers47.5 × 57 mm
DeskCleanerRobot2
rudebacon/DesktopCleaner- Size
- 47.5 × 57 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 95
- Pads
- 303
- Tracks, vias
- 444, 101
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Dec 2024
- Updated
- 1 Jun 2025
Overview
DeskCleanerRobot2 is an open-source printed circuit board by rudebacon, from the rudebacon/DesktopCleaner repository on GitHub. It is a 4-layer board of 47.5 × 57 mm with 89 parts on 95 nets, routed with 444 tracks and 101 vias.
It is built around the ESP32-S3-MINI-1-N8, TPS63020DSJR and EEEFTA471XAP, with the KT-0603R, SKHHAJA010 and BQ24092DGQR among its other parts. Its parts include 25 resistors, 15 capacitors, 3 diodes, 1 IC and 1 switch. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
TPS63020DSJR
VSON-14-EP(3x4)-40℃~+85℃@(TA) 1 1.2V~5.5V 1.8V~5.5V 2.4MHz 3A 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VSON-14-EP(3x4) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
EEEFTA471XAP
SMD,D6.3xL7.7mm-55℃~+105℃ 10V 160mΩ@100kHz 2000hrs@105℃ 470uF 6.3mm 600mA@100kHz 8mm Polarized ±20% SMD,D6.3xL7.7mm Aluminum Electrolytic Capacitors - SMD ROHSPanasonicAluminum Electrolytic Capacitors - SMD
KT-0603R
0603-40℃~+85℃ 1.6mm x 0.8mm square LED 1.8V~2.4V 120° 20mA 300mcd 40mW 615nm~630nm 645nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - Discrete
SKHHAJA010
插件-4P,6x6mm-40℃~+90℃ 1,000,000 cycles 12V 1N 4.3mm 50mA 6mm 6mm PC Pin Round Button SPST-NO Through Hole 插件-4P,6x6mm Tactile Switches ROHSALPSALPINETactile Switches
BQ24092DGQR
MSOP-10-EP0℃~+125℃ 1 1.4A 125uA 4.2V 4.45V~6.45V Charging IC Lithium Battery Support MSOP-10-EP Battery Management ROHSTexas InstrumentsBattery ManagementSC3
SMD-4PSMD-4P New Arrivals ROHSTT ElectronicsUncategorised
SI2333CDS-T1-GE3-VB
SOT-23(TO-236)-55℃~+150℃ 1 P-Channel 1.5V 1.6W 10nC@4.5V 155pF 20V 4A 60mΩ@10V、65mΩ@4.5V、80mΩ@2.5V 835pF P-Channel SOT-23(TO-236) MOSFETs ROHSVBsemi ElecMOSFETs
SSSS811101
SMD-40℃~+85℃ 10,000 cycles 300mA 4.1mm 5V Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSALPSALPINESlide Switches
U254-051N-4BH806
SMD-40℃~+85℃ 1 1A 3,000 Cycles 30V 5P 6.6mm Black Female Micro-B Surface Mount, Right Angle SMD USB Connectors ROHSXKB ConnectionUSB Connectors
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
XFL4020-152MEC
SMD,4x4mm1.5uH 14.4mΩ 4.6A 9.1A Magnetic Shielded Inductor ±20% SMD,4x4mm Power Inductors ROHSCoilcraftPower Inductors
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 2k | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8, R9, R10, R11, R14, R15, R16, R17, R18, R19, R23 |
| 7 | GND | Holes:Soldering_Holes_1mmH_2mmPad | -BAT1, -E1, GN0, GN1, GN2, GN3, GN7 |
| 5 | +3.3V | Holes:Soldering_Holes_1mmH_2mmPad | 3V0, 3V1, 3V2, 3V3, 3V7 |
| 5 | TestPoint_Small | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11, C12 |
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C8 |
| 3 | 1.5k | Resistor_SMD:R_0402_1005Metric | R20, R24, R33 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R21, R25, R26 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C9 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | EEEFTA471XAP | SamacSys_Parts:EEE0JA331XP | C14, C15 |
| 2 | KT-0603R | SamacSys_Parts:LEDC1608X70N | LED2, LED3 |
| 2 | SKHHAJA010 | SamacSys_Parts:SKHHALA010 | BOOT1, RESET1 |
| 1 | +BAT | Holes:Soldering_Holes_1mmH_2mmPad | +BAT1 |
| 1 | +E | Holes:Soldering_Holes_1mmH_2mmPad | +E1 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 4.7pF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 560 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AO1 | Holes:Soldering_Holes_1mmH_2mmPad | AO1 |
| 1 | AO2 | Holes:Soldering_Holes_1mmH_2mmPad | AO2 |
| 1 | BO1 | Holes:Soldering_Holes_1mmH_2mmPad | BO1 |
| 1 | BO2 | Holes:Soldering_Holes_1mmH_2mmPad | BO2 |
| 1 | BQ24092DGQR | SamacSys_Parts:SOP50P490X110-11N | BC1 |
| 1 | DRV8835DSSR | SamacSys_Parts:DRV8835DSSR | MD1 |
| 1 | ESP32-S3-MINI-1-N8 | SamacSys_Parts:ESP32S3MINI1N8 | IC8 |
| 1 | KT-0603G | SamacSys_Parts:LEDC1608X70N | LED1 |
| 1 | PCA9548APWR | SamacSys_Parts:SOP65P640X120-24N | I2Ce1 |
| 1 | SC0 | Holes:Soldering_Holes_1mmH_2mmPad | SC0 |
| 1 | SC1 | Holes:Soldering_Holes_1mmH_2mmPad | SC1 |
| 1 | SC2 | Holes:Soldering_Holes_1mmH_2mmPad | SC2 |
| 1 | SC3 | Holes:Soldering_Holes_1mmH_2mmPad | SC3 |
| 1 | SC7 | Holes:Soldering_Holes_1mmH_2mmPad | SC7 |
| 1 | SD0 | Holes:Soldering_Holes_1mmH_2mmPad | SD0 |
| 1 | SD1 | Holes:Soldering_Holes_1mmH_2mmPad | SD1 |
| 1 | SD2 | Holes:Soldering_Holes_1mmH_2mmPad | SD2 |
| 1 | SD3 | Holes:Soldering_Holes_1mmH_2mmPad | SD3 |
| 1 | SD7 | Holes:Soldering_Holes_1mmH_2mmPad | SD7 |
| 1 | SI2333CDS-T1-GE3 | SamacSys_Parts:SOT95P237X112-3N | BM1 |
| 1 | SIG | Holes:Soldering_Holes_1mmH_2mmPad | SIG1 |
| 1 | SSSS811101 | SamacSys_Parts:SSSS811101 | S1 |
| 1 | TPS63020DSJR | SamacSys_Parts:TPS63020DSJR | VR1 |
| 1 | U254-051N-4BH806 | SamacSys_Parts:U254051N4BH806 | USB1 |
| 1 | USBLC6-2P6 | SamacSys_Parts:USBLC62P6 | ESD1 |
| 1 | XFL4020-152MEC | SamacSys_Parts:XFL4020152MEC | L2 |
More from rudebacon/DesktopCleaner
1Similar boards
- 4 layers65 × 56 mm
- 2 layers170.2 × 107.3 mm
- 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers27.6 × 30.5 mm
MotionRecognitionWatch
AidenBTTU/Gesture-Capture-Watch
A wristband-mounted gesture recognition system built around an STM32F411, IMU, and OLED display, with USB-C battery charging and ESD-protected I/O.
46 parts - 2 layers26 × 38 mm
Li Charger
kbroomm/Single-Cell-Li-ion-Charger
KiCad PCB design for a single-cell lithium-ion battery charger, with a 5V USB-C input and 10-LED charge level indicator.
34 parts - 2 layers69.9 × 78.7 mm
- 2 layers30.5 × 63 mm
Adbuino
akuker/adbuino
Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.
75 parts60 - 2 layers65 × 30 mm
Questions
How big is the DeskCleanerRobot2 PCB?
It measures 47.5 × 57 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DeskCleanerRobot2 use?
89 parts, built around the ESP32-S3-MINI-1-N8, TPS63020DSJR, EEEFTA471XAP and KT-0603R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DeskCleanerRobot2 KiCad files?
From the rudebacon/DesktopCleaner repository on GitHub, at the commit this page was made from: the board is DeskCleanerRobotPCB/DeskCleanerVersion2.0/DeskCleanerRobot2.kicad_pcb and its schematic DeskCleanerRobotPCB/DeskCleanerVersion2.0/DeskCleanerRobot2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DeskCleanerRobot2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rudebacon before reusing the design.