Skip to the content
4 layers40.1 × 60.5 mmHIVES360, the printed circuit board in 3D
Size
40.1 × 60.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
96
Nets
106
Pads
367
Tracks, vias
546, 150
Pours
11
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
2 Apr 2026
Updated
2 Apr 2026

Overview

HIVES360 is an open-source printed circuit board by GhanmiIyed, from the GhanmiIyed/Beehive-Monitoring repository on GitHub. It is a 4-layer board of 40.1 × 60.5 mm with 96 parts on 106 nets, routed with 546 tracks and 150 vias.

It is built around the ESP32-S3, BME280 and TPS63020DSJR, with the W25Q128JVSIQ, BMI270 and DW01A among its other parts. Its parts include 33 capacitors, 24 resistors, 9 ICs, 5 diodes and 4 inductors. It belongs with the ESP32 boards of this library.

Main components

10

Parts

96
QtyValueFootprintReferences
13100nFCapacitor_SMD:C_0402_1005MetricC11, C16, C17, C21, C23, C25, C45, C47, C48, C49, C50, C52, C53
610uFCapacitor_SMD:C_0402_1005MetricC3, C6, C7, C14, C44, C51
310KΩResistor_SMD:R_0402_1005MetricR5, R7, R8
31KResistor_SMD:R_0402_1005MetricR21, R23, R24
322uFCapacitor_SMD:C_0603_1608MetricC29, C30, C31
21.5pFCapacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolderC1, C2
214pFCapacitor_SMD:C_0402_1005MetricC20, C24
21KΩResistor_SMD:R_0402_1005MetricR9, R10
21MResistor_SMD:R_0402_1005MetricR4, R18
21kResistor_SMD:R_0402_1005MetricR3, R11
21uFCapacitor_SMD:C_0402_1005MetricC15, C18
22N7002Package_TO_SOT_SMD:SOT-23Q2, Q3
25.1KResistor_SMD:R_0402_1005MetricR17, R20
2LEDLED_SMD:LED_0603_1608MetricD4, D5
2SW_PushButton_Switch_SMD:SW_SPST_FSMSMSW1, SW2
2SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
2TLMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2
10.1uCapacitor_SMD:C_0402_1005MetricC26
10.4ΩResistor_SMD:R_0402_1005MetricR1
11.5KResistor_SMD:R_0402_1005MetricR12
11.5uHInductor_SMD:L_Coilcraft_XxL4020L2
1100Resistor_SMD:R_0402_1005MetricR22
1100KΩResistor_SMD:R_0402_1005MetricR25
1100kResistor_SMD:R_0402_1005MetricR14
1100nFCapacitor_SMD:C_0603_1608MetricC9
1100ΩResistor_SMD:R_0402_1005MetricR83
110nFCapacitor_SMD:C_0402_1005MetricC19
110uFCapacitor_SMD:C_0805_2012MetricC8
1150KResistor_SMD:R_0402_1005MetricR15
1180KResistor_SMD:R_0402_1005MetricR13
11uCapacitor_SMD:C_0402_1005MetricC22
12.6nHInductor_SMD:L_0201_0603MetricL5
1220KResistor_SMD:R_0402_1005MetricR2
124nHInductor_SMD:L_0402_1005MetricL1
12nHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL3
140MHzCrystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY1
1499ΩResistor_SMD:R_0402_1005MetricR6
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1Antenna_ShieldRF_Antenna:Texas_SWRA117D_2.4GHz_LeftAE2
1BLMountingHole:MountingHole_2.2mm_M2_Pad_ViaH4
1BME280BME280:PSON65P250X250X100-8NU22
1BMI270BMI270:XDCR_BMI270U21
1BRMountingHole:MountingHole_2.2mm_M2_Pad_ViaH3
1Battery INJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJ2
1DW01APackage_TO_SOT_SMD:SOT-23-6U3
1ESP32-S3Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mmU12
1G***kibuzzard-694968DBkibuzzard-694968DB
1GREENLED_SMD:LED_0603_1608MetricD2
1IM73D122Sensor_Audio:Infineon_PG-LLGA-5-2U20
1LOGOConsultation Orange:QR Code LAB619 Small 15mmG***
1LOGOConsultation Orange:HivesG***
1LOGOConsultation Orange:logo LAB619 8mmG***
1LOGOConsultation Orange:Logo LAB619 25mmG***
1P6SMB6.8CA/TR13Diode_SMD:D_SMA_HandsolderingD3
1RAK4200RF_Module:RAK4200U7
1REDLED_SMD:LED_0603_1608MetricD1
1TP4056LAB619:SOP127P600X175-9NU1
1TPS63020DSJRTPS63020DSJR:IC_TPS63020DSJRU4
1UARTConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_HorizontalJ1
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU6

Similar boards

  • 2 layers49.4 × 56.2 mmMic array, the printed circuit board in 3D

    Mic array

    winedarksea/sirith_tetrahedral

    High Performance Microphone Array

    114 partsGPL-3.0
  • 4 layers62 × 46.9 mm4LayerLabProject, the printed circuit board in 3D

    4LayerLabProject

    ZharbolatDinmukhamed/Haptic-Glove-PCB

    A wrist-mounted PCB for a haptic feedback glove, developed as part of my Research Assistantship at the Tactile Laboratory, Nazarbayev University.

    122 parts
  • 4 layers69.8 × 98.5 mmHeadset orga, the printed circuit board in 3D

    Headset orga

    Orlandogani/pers-esp32-headset

    This project was made by kicad 10.0. My first personal headset to support my several research in audio or embedded fields

    136 parts
  • 4 layers89 × 81 mmDKWS PCB, the printed circuit board in 3D

    DKWS PCB

    danielkluka/Diploma-Thesis

    Design of a Secure Data Transmission System in NB-IoT Environment

    121 partsMIT
  • 2 layers35.1 × 28.9 mmBms buck boost, the printed circuit board in 3D

    Bms buck boost

    tor1kk/bms-buck-boost

    Battery Management System (BMS) with Buck-Boost Converter

    38 parts10GPL-3.0
  • 2 layers147.9 × 160 mmDoper Dactyl, the printed circuit board in 3D

    Doper Dactyl

    Dopernieux/dactyl-manuform-wireless

    Ergonomic split mechanical keyboard - Dactyl Manuform BLE Flex PCB project

    102 parts
  • 4 layers110 × 30.5 mmFitLensPCB, the printed circuit board in 3D

    FitLensPCB

    nabudahab/FitLensPCB

    FitLens Senior Design PCB

    107 parts
  • 4 layers65 × 56 mmPi hat ups, the printed circuit board in 3D

    Pi hat ups

    Doenec/pi-hat

    collection of different shields to be stacked in raspberry pi

    80 parts1MIT

Questions

How big is the HIVES360 PCB?

It measures 40.1 × 60.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the HIVES360 use?

96 parts, built around the ESP32-S3, BME280, TPS63020DSJR and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HIVES360 KiCad files?

From the GhanmiIyed/Beehive-Monitoring repository on GitHub, at the commit this page was made from: the board is New folder/HIVES360.kicad_pcb and its schematic 30V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HIVES360 design in my own project?

Its repository states no licence, so its author keeps all rights: ask GhanmiIyed before reusing the design.