Skip to the content

Boards using the TLV75733PDRV

19 boards

Boards in 17 GitHub repositories, designed in KiCad, that use the TLV75733PDRV by Texas Instruments (-40℃~+125℃@(Tj) 1 1A 25uA 3.3V 425mV@(1A) 45dB@(100kHz) 5.5V 71.5uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive WSON-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TLV75733PDRV’s symbol, footprint and pinout are on its own page.

  • 4 layers50 × 65 mmFeroFlyF405, the printed circuit board in 3D

    FeroFlyF405

    Ozonised/FeroFlyF405

    FeroFlyF405 an open source STM32F405 based flight controller running INAV

    150 parts44CERN-OHL-P-2.0
  • 2 layers92 × 62.5 mmEthernet, the printed circuit board in 3D

    Ethernet

    rjrouquette/gpsdo

    GPSDO PTP Master

    111 parts11Unlicense
  • 6 layersOpenAquatix Hardware, the printed circuit board in 3D

    OpenAquatix Hardware

    ericvoi/OpenAquatix-Hardware

    OpenAquatix PCB files

    351 parts4CERN-OHL-P-2.0
  • 4 layers53 × 32 mmUbiquitous waddle, the printed circuit board in 3D

    Ubiquitous waddle

    leonwip/ubiquitous-waddle

    Dual channel CANnectivity CAN FD to USB-C adapter

    44 parts3CERN-OHL-P-2.0
  • 4 layers50 × 16 mmSystem board, the printed circuit board in 3D

    System board

    proegssilb/lightsaber-hardware

    PCBs and other files for lightsaber soundboard hardware.

    72 parts2CERN-OHL-S-2.0
  • 4 layers17.5 × 30.5 mmESP32 S3 CAM wifi, the printed circuit board in 3D

    ESP32 S3 CAM wifi

    HexSense-MIT/HS_ESP32_CAM_module

    A custom designed USB camera module, with ESP32-S3R8 + OV2640. This will be used for the HexSenseCAM payload.

    52 parts1
  • 4 layers15.4 × 25.5 mmChiquito, the printed circuit board in 3D

    Chiquito

    devcexx/chiquito

    Smol development / testing board for STM32C071

    17 parts
  • 4 layers1,189 × 841 mmTARS MK2, the printed circuit board in 3D

    TARS MK2

    ISSUIUC/ISS-PCB-Archive

    Archive of PCBs that are more than 1 to 2 years old.

    87 parts
  • 10 layers21.3 × 70 mmTemplate plus, the printed circuit board in 3D

    Template plus

    nguyenmihn/Library-Custom-Kicad

    A professional documentation template for KiCad projects inspired by industrial engineering document standards.

    247 parts
  • 4 layers55.9 × 55.9 mmQUADCOPTER, the printed circuit board in 3D

    QUADCOPTER

    Riskerx/QUADCOPTER

    QuadCopter Rev B: STM32F401 four-layer flight-controller PCB, manufacturing files, hardware documentation and firmware integration plan.

    103 parts
  • 2 layersDancing dots pcb, the printed circuit board in 3D

    Dancing dots pcb

    softminus/dancing_dots

    The Fastest Flip Dot in the West

    1,349 parts
  • 2 layers35.5 × 72.4 mmFristracker, the printed circuit board in 3D

    Fristracker

    TherealONE12/FrisTracker

    A tracker for your frisbee Games

    15 parts
  • 6 layers70 × 70 mmFoC Motor Controller, the printed circuit board in 3D

    FoC Motor Controller

    WeymenKoo/Motor-Controller

    Technical notes from a full design cycle: idea → theory → schematic → simulation → layout → fab → bring-up plan.

    212 parts
  • 4 layers69.9 × 54 mmNx module breakout, the printed circuit board in 3D

    Nx module breakout

    tinyvision-ai-inc/pico2-nx

    RP2350+Lattice Crosslink NX FPGA board

    58 parts5MIT
  • 4 layers17.5 × 30.5 mmESP32 S3 CAM, the printed circuit board in 3D

    ESP32 S3 CAM

    HexSense-MIT/HS_ESP32_CAM_module

    A custom designed USB camera module, with ESP32-S3R8 + OV2640. This will be used for the HexSenseCAM payload.

    50 parts1
  • 4 layers69.9 × 162.4 mmFCB, the printed circuit board in 3D

    FCB

    kitspace-test-repos/kicad6-file-collection

    287 partsMIT
  • 4 layers100 × 90 mmVCU CM5, the printed circuit board in 3D

    VCU CM5

    NTURacingTeam/nturt_kicad_EP7

    431 parts
  • 2 layers15.5 × 98 mmFristracker RCF, the printed circuit board in 3D

    Fristracker RCF

    TherealONE12/FrisTracker

    A tracker for your frisbee Games

    12 parts