
Stacked boards
proegssilb/lightsaber-hardware
PCBs and other files for lightsaber soundboard hardware.

PCBs and other files for lightsaber soundboard hardware.
System board is an open-source printed circuit board by proegssilb, from the proegssilb/lightsaber-hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 50 × 16 mm with 72 parts on 128 nets, routed with 876 tracks and 106 vias.
It is built around the MDBT50Q-1MV2, GD25Q16ETIGR and MAX98357AETE+T, with the HSP061-2M6, ICM-20648 and MCP73834T-FCI/MF among its other parts. Its parts include 21 resistors, 16 capacitors, 8 ICs, 8 transistors and 8 connectors. It belongs with the nRF52 and nRF5x boards of this library.
Kicad projects and other files for lightsaber soundboard hardware.
NO WARRANTY IS AVAILABLE, EXPRESSLY STATED, OR IMPLIED.
These designs and files are not guaranteed to have been reviewed by a professional engineer. They are not guaranteed to work in your design. They are not even guaranteed to work if sent to a PCB manufacturer. The author(s) cannot be held liable for any injuries or damage that occurs as a result of using these files. It is your responsibility to review all designs and files carefully before using them or integrating them into your own design.
Let the buyer beware.
See the LICENSE.txt file. It's a CERN-OHL-S-2.0 license. If that doesn't work for you, let's talk.
Each subfolder represents a different kicad project, each attempting a different board, either in terms of features or formfactor.
Documentation, if any is available, will be either a README in each design's root, or a
docs/ folder in each design.
I use the latest kicad version from flatpak. If you can't open a project, feel free to file an issue, but there's a limit to how much support I can provide.
Preferred PCB manufacturers include JLCBCP, OSH Park, and PCBWay, but any given project won't necessarily support all 3 manufacturers. Preferred distributors include Digikey, Mouser, and LCSC. Same caveat with preferred PCB Manufacturers applies to distributors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R4, R10, R16, R17 |
| 4 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C10, C14, C15, C16 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R12, R13, R14, R15 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C7, C9, C13 |
| 4 | PMZB290UNE2YL | Package_DFN_QFN:Diodes_DFN1006-3 | Q5, Q6, Q7, Q8 |
| 3 | 2.0k | Resistor_SMD:R_0402_1005Metric | R8, R20, R21 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 220p | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | DMP1012UFDF | Imports:DMP1012UFDF | Q1, Q4 |
| 2 | FB_Sm | Capacitor_SMD:C_0603_1608Metric | FB1, FB2 |
| 2 | SSM6K504NU.LF | Imports:SSM6K504NULF | Q2, Q3 |
| 1 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 100 nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 105450-0101 | Imports:AMPHENOL_12401832E402A | J7 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 32.768k | Imports:XTAL_ECS-.327-12.5-1210B-N-TR | Y1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 503398-1892 | Imports:Molex uSD Card Holder Push-Push 503398-1892 | J2 |
| 1 | BATT | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | J1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | BQ29705DSER | Package_SON:WSON-6_1.5x1.5mm_P0.5mm | U3 |
| 1 | BTNs | Connector_PinSocket_2.00mm:PinSocket_2x03_P2.00mm_Vertical | J6 |
| 1 | BZX38450 | Diode_SMD:D_SOD-323 | D4 |
| 1 | DBG | Imports:Prog-Pads | J3 |
| 1 | Flash_16Mb | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | HSP061-2M6 | Imports:SON50P100X145X65-6N-D | IC3 |
| 1 | ICM-20648 | Imports:QFN40P300X300X95-25N-D | IC4 |
| 1 | LEDs | Connector_PinSocket_2.00mm:PinSocket_2x04_P2.00mm_Vertical | J5 |
| 1 | MAX98357AETE+T | Imports:Maxim_Integrated-T1633-4-0-V-IPC_C | U2 |
| 1 | MCP73834T-FCI_MF | Imports:SON50P300X300X100-11N-D | IC2 |
| 1 | MDBT50Q-1MV2 | Imports:XCVR_MDBT50Q-1MV2 | U1 |
| 1 | PMEG1030EJ | Diode_SMD:D_SOD-323F | D6 |
| 1 | QWIIC | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J8 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | REV | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | RST | Imports:CK_Components-KMR231NG_LFS-MFG | SW1 |
| 1 | SPKR | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | J4 |
| 1 | TLV75733PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U4 |
| 1 | USR | Imports:CK_Components-KMR231NG_LFS-MFG | SW2 |
| 1 | WS2812B-2020 | Imports:WS2812B-2020 | D1 |

proegssilb/lightsaber-hardware
PCBs and other files for lightsaber soundboard hardware.

pointhi/HighPower-Mechaduino
Mechaduino derivative which drives up to 10A, drawn using KiCad

kaysond/1U-DiskShelf
A 3D-Printable 1U Disk Shelf (4 bays) With Custom SATA Backplane






si-nalsal/pcb-mantis
A servo-based UAV flight controller built around the STM32H743IIK6 (Cortex-M7, UFBGA-201, 0.65 mm pitch). The board distributes power to a fixed-wing/multirotor airframe with 16 PWM servo outputs, redundant IMU and…
It measures 50 × 16 mm and has 4 copper layers, 1.6 mm thick.
72 parts, built around the MDBT50Q-1MV2, GD25Q16ETIGR, MAX98357AETE+T and HSP061-2M6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the proegssilb/lightsaber-hardware repository on GitHub, at the commit this page was made from: the board is system-board/system-board.kicad_pcb and its schematic button-board/button-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).