

Jarvis
- Size
- 52 × 29.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 94
- Pads
- 288
- Tracks, vias
- 644, 153
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Jun 2025
- Updated
- 11 Aug 2025
Overview
Jarvis is an open-source printed circuit board by MBifolco, from the MBifolco/jarvis-pcb repository on GitHub. It is a 4-layer board of 52 × 29.4 mm with 74 parts on 94 nets, routed with 644 tracks and 153 vias.
It is built around the MAX98357AETE+T, W25Q128JWSIQ and ESP32-S3R16V, with the TPD4E05U06QDQARQ1, BAT54CW and ECS-.327-12.5-1210B-N-TR among its other parts. Its parts include 27 capacitors, 23 resistors, 7 ICs, 6 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
8MAX98357AETE+T
TQFN-16-EP(3x3)-40℃~+85℃ 2.4mA 2.5V~5.5V 3.2Wx1@4Ω 77dB 92% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D TQFN-16-EP(3x3) Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio AmplifiersW25Q128JWSIQ
SOIC-8-208mil-40℃~+85℃ 1.7V~1.95V 100,000 cycles 10uA 128Mbit 133MHz 20 Years SPI SOIC-8-208mil NOR FLASH ROHSWinbond ElecNOR FLASHESP32-S3R16V
QFN56-7X7-0.4QFN56-7X7-0.4 New Arrivals ROHSEspressif SystemsUncategorisedTPD4E05U06QDQARQ1
USON-10(1x2.5)-40℃~+125℃@(Ta) 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.4V、8.7V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)BAT54CW
SOT-323-3-65℃~+125℃ 1 Pair Common Cathode 1V@100mA 200mA 2uA@25V 30V 600mA SOT-323-3 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesECS-.327-12.5-1210B-N-TR
SMD1210-4PCrystalsECSIN-S63TBS5R5G5B
SMD-4P,1.6x0.8mm-30℃~+85℃ 0.5mm 0.8mm 1.6mm 120° B:5mA、R:5mA、G:5mA Common Anode G:90mW、B:90mW、R:65mW R:1.9V~2.2V、G:2.8V~3.0V、B:2.8V~3.0V R:30mcd、G:230mcd、B:45mcd R:615nm~630nm、G:518nm~527nm、B:461nm~473nm R:625nm、G:530nm、B:473nm Water Clear SMD-4P,1.6x0.8mm RGB LEDs ROHSInoluxRGB LEDsRFANT3216120A5T
1206-40℃~+85℃ 1.2mm 1.55mm 1.6mm 100MHz 2 2.4GHz 2dBi 3.2mm 1206 Antennas ROHSWalsin TechnologyAntennas
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C7, C8, C11, C12, C13, C15, C19, C24, C26 |
| 6 | 0 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15 |
| 6 | 1uf | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C17, C21, C23 |
| 5 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1, C6, C20, C25, C27 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R8, R9, R17 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric | R21, R22, R23 |
| 3 | 560 | Resistor_SMD:R_0603_1608Metric | R18, R19, R20 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5 |
| 2 | 12.5pf | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 12pf | Capacitor_SMD:C_0402_1005Metric | C14, C16 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 24nh | jarvis:MLG1005SR24JT000 | L1, L2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R6 |
| 1 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 2137160001 | jarvis:MOLEX_2137160001-holes | U2 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uf | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 5M | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 6.8 nH | jarvis:MLG1005SR24JT000 | L3 |
| 1 | ABM10W-40.0000MHZ-8-N1G-T3 | jarvis:XTAL_ABM10W-40.0000MHZ-8-N1G-T3 | Y2 |
| 1 | BAT54CW | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | D2 |
| 1 | Conn_01x02 - Battery | Connector_Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J3 |
| 1 | Conn_01x02 - Speaker | Connector_Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J1 |
| 1 | ECS-.327-12.5-1210B-N-TR | jarvis:XTAL_ECS-.327-12.5-1210B-N-TR | Y3 |
| 1 | ESP32-S3R16V | jarvis:esp32-s3r16v | IC1 |
| 1 | EVQ-P9H02W Boot | jarvis:EVQP9H02W | S2 |
| 1 | EVQ-P9H02W reset | jarvis:EVQP9H02W | S1 |
| 1 | IN-S63TBS5R5G5B | jarvis:IN-S63TBS5R5G5B_INO | LED1 |
| 1 | MAX98357AETE+T | jarvis:LIB_MAX98357AETE+T | IC2 |
| 1 | MCP73871T-4CAI_ML | jarvis:MCP73871T-4CAI ML | IC3 |
| 1 | Mic Conn_01x05 | Connector_Molex:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J2 |
| 1 | PESD5V0X1UAB,115 | jarvis:PESD5V0X1UAB115 | D1 |
| 1 | RFANT3216120A5T | jarvis:ANT_RFANT3216120A5T_WAL | AE1 |
| 1 | TLV70033DDCT | jarvis:TLV70033DDCT | IC4 |
| 1 | TPD4E05U06QDQARQ1 | jarvis:IC_TPD4E05U06QDQARQ1-two | U1 |
| 1 | W25Q128JWSIQ | jarvis:W25Q128JWSIQ-1.8 | IC5 |
More from MBifolco/jarvis-pcb
2- 4 layers39.1 × 37.5 mm

- 4 layers17.5 × 45.8 mm

Similar boards
- 4 layers50 × 16 mm

System board
proegssilb/lightsaber-hardware
PCBs and other files for lightsaber soundboard hardware.
72 parts2CERN-OHL-S-2.0 - 4 layers130 × 125 mm

Flatburn V5
MIT-Senseable-City-Lab/flatburn-lte
Part of the City Scanner project at MIT Senseable City Lab, Flatburn is an open-source, solar-powered, modular sensing platform that can be easily deployed on road vehicles to collect various environmental data.
587 parts1MIT - 4 layers73.7 × 16.8 mm

- 4 layers80 × 40 mm

Audio latency tester board
antmicro/audio-latency-tester-board
This project contains open hardware design files for an audio latency processing board. The system allows driving an external speaker and collecting audio samples from a pair of PDM or I2S microphones.
240 parts1Apache-2.0 - 4 layers40 × 20 mm

Grove - Vision AI Module V2
aram-ap/daredevil
Computer Vision-Based Tactile Feedback for the Visually Impaired
114 parts3MIT - 6 layers44.4 × 58.1 mm

- 2 layers90 × 50 mm

Spi flash adapter v1
Spectating101/hardware-splicer
Auditable hardware bring-up: donor → KiCad carrier + DRC + bench gates → PROJECT_PACKAGE. Seeking 3 design partners.
40 partsMIT - 4 layers28.8 × 60.2 mm

Whistler motherboard
ccc909/Whistler
Open-source 16-channel USB MEMS microphone array: KiCad PCB design, XMOS XU316 (xcore.ai) USB Audio Class 2 firmware with DFU, BOM and JLCPCB-ready production files. CERN-OHL-S.
76 parts1CERN-OHL-S-2.0
Questions
How big is the Jarvis PCB?
It measures 52 × 29.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Jarvis use?
74 parts, built around the MAX98357AETE+T, W25Q128JWSIQ, ESP32-S3R16V and TPD4E05U06QDQARQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jarvis KiCad files?
From the MBifolco/jarvis-pcb repository on GitHub, at the commit this page was made from: the board is jarvis/jarvis.kicad_pcb and its schematic jarvis/components.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jarvis design in my own project?
Its repository states no licence, so its author keeps all rights: ask MBifolco before reusing the design.