
System board
proegssilb/lightsaber-hardware
PCBs and other files for lightsaber soundboard hardware.

A 3D-Printable 1U Disk Shelf (4 bays) With Custom SATA Backplane
1U Backplane is an open-source printed circuit board by kaysond, from the kaysond/1U-DiskShelf repository on GitHub. It is a 4-layer board of 165 × 43.5 mm with 36 parts on 47 nets, routed with 508 tracks and 94 vias.
It is built around the SN74LV1T34DBV, MIC1557YM5 and BZX38450-C1V8X, with the BSS138, SDM40E20LA and SDM40E20LC among its other parts. Its parts include 9 diodes, 8 resistors, 6 connectors, 4 capacitors and 3 ICs.
A 3D-Printable 1U Disk Shelf (4 bays) With Custom SATA Backplane
Board files can be found in the Backplane PCB directory.
Models can be found on MakerWorld or see the Models directory for CAD files
This project is released under the CC BY-NC-SA 4.0 license. See LICENSE.txt or https://creativecommons.org/licenses/by-nc-sa/4.0/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2.8V / 10mA | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D6, D7, D9 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5, R8 |
| 4 | M3 Screw Mount Hole | 1U Backplane:M3 Screw Mount Hole | Pad_gge6706, Pad_gge8659, Pad_gge8677, Pad_gge8716 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R3, R7 |
| 2 | 17.8k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R6 |
| 2 | BZX38450-C1V8X | Diode_SMD:D_SOD-323_HandSoldering | D5, D8 |
| 2 | Molex 470533000 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J3, J6 |
| 2 | SATA 7+15 Female | 1U Backplane:CONN-TH_SATA7-15-TYPE-B | J1, J4 |
| 2 | SATA 7+15 Male | 1U Backplane:CONN-TH_SATA7-15-TYPE-A | J2, J5 |
| 2 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 1k | Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical | RV1 |
| 1 | 56n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MIC1557YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SDM40E20LA | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | SDM40E20LC | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | SDM40E20LS | Package_TO_SOT_SMD:SOT-23 | D1 |

proegssilb/lightsaber-hardware
PCBs and other files for lightsaber soundboard hardware.




HarkonenBade/batt
A 1S lipo charge/protect board based on the TP4056 and the FS312F



It measures 165 × 43.5 mm and has 4 copper layers, 1.58 mm thick.
36 parts, built around the SN74LV1T34DBV, MIC1557YM5, BZX38450-C1V8X and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kaysond/1U-DiskShelf repository on GitHub, at the commit this page was made from: the board is Backplane PCB/1U Backplane.kicad_pcb and its schematic Backplane PCB/1U Backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kaysond before reusing the design.