Skip to the content

Boards using the SN74LVC1G125DBV

22 boards

Boards in 17 GitHub repositories, designed in KiCad, that use the SN74LVC1G125DBV by Texas Instruments (-40℃~+125℃ 1 1 1.65V~5.5V 10uA 3.7ns@3.3V,15pF 32mA 32mA 74LVC Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC1G125DBV’s symbol, footprint and pinout are on its own page.

  • 2 layers141.9 × 72.9 mmImu to dxl 10p, the printed circuit board in 3D

    Imu to dxl 10p

    jyg9/microduck-community-kit

    补充microduck缺少的硬件电路和固件,另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻

    897 parts28Apache-2.0
  • 4 layers58.5 × 85.5 mmSr jv esp32, the printed circuit board in 3D

    Sr jv esp32

    connorzheng97/srjv

    SR-JV80 Programmable Expansion Card with ESP32 Wi-Fi

    84 parts18
  • 4 layers65 × 30 mmElec gripette hub and dyn, the printed circuit board in 3D

    Elec gripette hub and dyn

    pollen-robotics/elec_grabette

    Set of electronic boards for Grabette/Gripette

    122 parts11Apache-2.0
  • 2 layers36.8 × 22.9 mmPluto clock buffer, the printed circuit board in 3D

    Pluto clock buffer

    sq5nry/qo100-pluto-heavy-duty-gs

    QO100 implementation of ground station

    24 parts2MIT
  • 4 layers94 × 65.9 mmMiniHexa, the printed circuit board in 3D

    MiniHexa

    Gex-devs/miniHexa

    Custom mini hexa using Hiwonders chassis

    82 parts1
  • 4 layers70 × 70 mmGpsdo, the printed circuit board in 3D

    Gpsdo

    AndreasArendt/gpsdo

    Low cost GPS Disciplined Oscillator

    88 partsMIT
  • 4 layers65 × 30.9 mmElec RPI Robot HAT, the printed circuit board in 3D

    Elec RPI Robot HAT

    armature-ai-labs/indieduck

    Open robot prototype: editable FreeCAD CAD, printable parts and fit-test documentation. Adapted from Open Duck Mini.

    132 partsApache-2.0
  • 2 layers99.1 × 99.1 mmConnector test stand, the printed circuit board in 3D

    Connector test stand

    L0czek/rakieta

    The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.

    86 parts
  • 4 layers65 × 30.9 mmElec RPI Robot HAT, the printed circuit board in 3D

    Elec RPI Robot HAT

    modewang/elec_RPI_Robot_HAT

    The RPIRobotHAT can be power from 5 to 28V. It is designed to use of the motor connector as an power input.

    127 partsApache-2.0
  • 4 layers101 × 48 mmMotorControl, the printed circuit board in 3D

    MotorControl

    steewbsd/gilgamesh

    159 parts
  • 2 layers144.7 × 98.2 mmSichergo left, the printed circuit board in 3D

    Sichergo left

    steewbsd/Sichergo

    Mechanical Keyboard PCB

    118 parts
  • 4 layers60 × 32.5 mmSigma delta dac pcb, the printed circuit board in 3D

    Sigma delta dac pcb

    yunochi/fpga-sigma-delta-dac

    FPGA로 만드는 자작 오디오 DAC 프로젝트

    51 parts
  • 2 layers27.1 × 30.2 mmImu to dxl, the printed circuit board in 3D

    Imu to dxl

    jyg9/microduck-community-kit

    补充microduck缺少的硬件电路和固件,另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻

    77 parts28Apache-2.0
  • 2 layers62.5 × 39.8 mmSed1200emu, the printed circuit board in 3D

    Sed1200emu

    RetroLoom/sed1200emu

    A Raspberry Pi Pico display replacement for the Roland MT-32, with a modern TFT/OLED, MIDI VU meters, and MIDI buffer-overflow protection.

    15 parts4GPL-3.0
  • 2 layers101.6 × 58.4 mmMAVRIC Main, the printed circuit board in 3D

    MAVRIC Main

    ISU-MAVRIC/MAVRIC_Main

    Hardware and firmware for MAVRIC's main control system

    27 parts1
  • 11 layers284.7 × 100.3 mmAzimuth PCB, the printed circuit board in 3D

    Azimuth PCB

    MysteryAssss/Keyboard_PCB

    172 parts
  • 2 layers144.7 × 98.2 mmSichergo right, the printed circuit board in 3D

    Sichergo right

    steewbsd/Sichergo

    Mechanical Keyboard PCB

    100 parts
  • 4 layers65 × 30 mm148p7 112p1, the printed circuit board in 3D

    148p7 112p1

    yilv1982/duck-robot

    60 parts
  • 2 layers27.1 × 30.2 mmImu to dxl, the printed circuit board in 3D

    Imu to dxl

    yilv1982/duck-robot

    74 parts