Skip to the content

Boards using the TS3USB30EDGSR-TP

25 boards

Boards in 24 GitHub repositories, designed in KiCad, that use the TS3USB30EDGSR-TP by TECH PUBLIC (-40℃~+85℃ 1.1GHz 1.2us 11Ω 2.5V~5.5V 200ps 20us 4pF MSOP-10L Analog Switches, Multiplexers ROHS). See how each wires it, with its parts, size, README and files; the TS3USB30EDGSR-TP’s symbol, footprint and pinout are on its own page.

  • 4 layers128.5 × 40 mmScalenode cm4-baseboard, the printed circuit board in 3D

    Scalenode cm4-baseboard

    antmicro/scalenode-cm4-baseboard

    Baseboard for Raspberry Pi 4 Compute Module optimized for clustering

    146 parts152Apache-2.0
  • 2 layers50 × 132 mmSd mux, the printed circuit board in 3D

    Sd mux

    tmarkettos/sd-mux

    SD card multiplexer, for automated embedded development

    55 parts7Apache-2.0
  • 2 layers30 × 71 mmCamera 360, the printed circuit board in 3D

    Camera 360

    X-Lemon-X/camera_360

    Camera 360 made form 3x IMX258 12Mb 120deg cameras conencted over usb-c 2.0

    48 parts2
  • 6 layers53 × 80 mmTheSummitProject, the printed circuit board in 3D

    TheSummitProject

    Da-Dog/the-summit-project-hardware

    108 parts1
  • 2 layers200.9 × 59.7 mmPower supply front, the printed circuit board in 3D

    Power supply front

    jakkra/Agilent-6626A-GUI

    The idea is to be able to move away the really big power supply and only have the new front panel visible. The UI is running on a Raspberry Pi with a 7" touch screen.

    69 parts1
  • 4 layersSEControlBoard, the printed circuit board in 3D

    SEControlBoard

    sdsmt-robotics/WSPEC-26-27

    Repo to hold files for our robot for the 2027 WSPEC competition

    63 parts1MIT
  • 6 layers151 × 88 mmPocket reform motherboard, the printed circuit board in 3D

    Pocket reform motherboard

    torlye/pocket-reform

    My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!

    443 parts1
  • 4 layers60 × 110 mmNucula v2, the printed circuit board in 3D

    Nucula v2

    zeugmaster/nucula-board

    Nucula Board: an ESP32-C3 hardware prototype with USB-C, PN7160 NFC, OLED and detachable keyboard. KiCad sources and manufacturing files.

    138 parts1CERN-OHL-S-2.0
  • 2 layers92.7 × 62.2 mmMgc, the printed circuit board in 3D

    Mgc

    0x007E/mgc

    MeGARCard - Development Platform

    121 parts
  • 6 layers140 × 90 mmAtlas drive, the printed circuit board in 3D

    Atlas drive

    AtlasAutoware/carv2

    Atlas Autoware car v2: drive board (ESC, BMS, USB-C charging), Jetson carrier, printed kit

    409 parts
  • 4 layers94 × 72.8 mmMain board v2, the printed circuit board in 3D

    Main board v2

    BlueJayRacing/22xt_kicad

    As a summary, you should be using KiCad Version 9.0. All project will be modular, and you should be storing all your step files, symbols, & footprints within the created folders.

    163 parts
  • 4 layers100 × 100 mmFarmMesh Node, the printed circuit board in 3D

    FarmMesh Node

    chinawrj/FarmMesh-Node

    Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.

    164 parts
  • 4 layers70 × 30 mmUsb replug, the printed circuit board in 3D

    Usb replug

    clankagent/usb-replug

    USB 2.0 timed disconnect adapter with CMOS 555; revision B unbuilt prototype for design review

    40 parts
  • 4 layers87 × 55 mmFSC BT1104QI Breakout, the printed circuit board in 3D

    FSC BT1104QI Breakout

    fsanzeni/FSC-BT1104QI-Breakout

    Breakout board for Feasycom FSC-BT1104QI (Bluetooth 5.4 / QCC3095) with USB-C/UART bridge, 3.3V LDO regulation, I2S digital audio, differential speaker outputs, and all pads broken out.

    77 partsMIT
  • 4 layers75 × 40 mmMidi2BLE, the printed circuit board in 3D

    Midi2BLE

    nikhilsudhir/midi2BLE

    MIDI 2 Bluetooth converter project

    64 partsMIT
  • 2 layers34.3 × 36.6 mmUSB HubSwitch, the printed circuit board in 3D

    USB HubSwitch

    peteEH/usbHub-2host-1device

    Single Device can be switched between two hosts

    27 parts
  • 2 layers33.5 × 52.7 mmDualsesnseIC, the printed circuit board in 3D

    DualsesnseIC

    sai-suneeth/projects

    for the proteus simulations download the mkv files

    20 parts
  • 2 layers85 × 35 mmUsbKVM, the printed circuit board in 3D

    UsbKVM

    YTvW/usbKVM-hardware

    A small two host -> 4 device usb switch with all connection on the back

    36 parts
  • 2 layers50 × 114 mmSd mux, the printed circuit board in 3D

    Sd mux

    3mdeb/sd-mux

    Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/

    52 parts8Apache-2.0
  • 4 layers90 × 80 mmEos cm4-base, the printed circuit board in 3D

    Eos cm4-base

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    46 parts8MIT
  • 4 layers148 × 78 mmHub, the printed circuit board in 3D

    Hub

    Bruhdows/klink

    Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.

    85 parts
  • 2 layers46.6 × 56.2 mmTempMonitor, the printed circuit board in 3D

    TempMonitor

    hancho6319/My_PCB_Designs_repo

    76 parts
  • 2 layers59 × 66 mmResources, the printed circuit board in 3D

    Resources

    marian-scientific/projects

    project data, records & publications

    17 parts
  • 4 layers80 × 50 mmMidi2BLE, the printed circuit board in 3D

    Midi2BLE

    nikhilsudhir/midi2BLE

    MIDI 2 Bluetooth converter project

    63 partsMIT