4 layers91.5 × 65 mm
6 layers53 × 80 mm
TheSummitProject
Da-Dog/the-summit-project-hardware1- Size
- 53 × 80 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 185
- Pads
- 535
- Tracks, vias
- 1,111, 290
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Aug 2026
- Updated
- 6 Nov 2026
Overview
TheSummitProject is an open-source printed circuit board by Da-Dog, from the Da-Dog/the-summit-project-hardware repository on GitHub. It is a 6-layer board of 53 × 80 mm with 108 parts on 185 nets, routed with 1,111 tracks and 290 vias.
It is built around the STM32U5F7VJT6, MAX-M10S-00B and RAK4630, with the BME280, TPS62840DLCR and USBLC6-2SC6 among its other parts. Its parts include 43 capacitors, 32 resistors, 11 ICs, 4 connectors and 4 inductors. It belongs with the STM32 boards of this library.
Main components
10
STM32U5F7VJT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 160MHz 32 Bit 3MB 4MB 82 ARM Cortex-M33 Built-in FLASH Undervoltage detection (BOR/LVD/LVR/LVI)、Built-in general-purpose timer、Hardware CRC、Integrated LDO、Calendar function、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG)、Window watchdog (WWDG) LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MAX-M10S-00B
LCC-18(9.7x10.1)LCC-18(9.7x10.1) GNSS Modules ROHSu-bloxGNSS ModulesRAK4630
SMDSMD RF Modules ROHSRAKwirelessGlobal Sourcing Parts
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
TPS62840DLCR
VSON-8(1.5x2)-40℃~+125℃@(TJ) 1 1.8MHz 1.8V~3.3V 1.8V~6.5V 60nA 750mA Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Cycle-by-cycle current limiting Step-down type Yes VSON-8(1.5x2) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
LSM303AGR
LGA-12(2x2)-40℃~+85℃ 1.5uA 1.71V~3.6V 16bit Accelerometer SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSSTMicroelectronicsAccelerometersNPM1300-CAAA-R
WLCSP-35(2.4x3)-40℃~+85℃ 1V~3.3V 200mA 4V~5.5V I2C Overcurrent Protection、Adjustable current limiting、Light load efficient mode、Output discharge WLCSP-35(2.4x3) Power Management - Specialized ROHSNordic SemiconPower Management - Specialized
TS3USB30EDGSR-TP
MSOP-10L-40℃~+85℃ 1.1GHz 1.2us 11Ω 2.5V~5.5V 200ps 20us 4pF MSOP-10L Analog Switches, Multiplexers ROHSTECH PUBLICAnalog Switches, Multiplexers
PKLCS1212E4001-R1
SMD,12x12mm-20℃~+70℃ 12mm 12mm 3mm 4kHz 84dB Passive (Externally Driven) Piezoelectric ±12.5V SMD,12x12mm Buzzers ROHSMurataBuzzers
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C10, C13, C19, C23, C25, C26, C29, C30, C35, C36, C37, C38, C39 +8 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R11, R13, R14, R15, R16, R17, R25, TH1 |
| 8 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3, R6, R7, R8, R19, R20, R21 |
| 6 | 100k | Resistor_SMD:R_0603_1608Metric | R12, R22, R23, R24, R26, R27 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C8, C28, C32, C40, C44 |
| 4 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C12, C20, C21, C31 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R10, R28, R29 |
| 3 | 2.2u | Inductor_SMD:L_0805_2012Metric | L1, L2, L3 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2, U3 |
| 1 | 1.8n | Capacitor_SMD:C_0603_1608Metric | L4 |
| 1 | 1.8p | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB2 |
| 1 | 16Mhz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | 1m | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 3.3 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 300k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 32.768Khz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 4.7n | Capacitor_SMD:C_1812_4532Metric | C24 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | Battery Connector | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | BATT1 |
| 1 | Blue_LED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | GPS_ANT | RF_Antenna:Antenova_SR4G013_GPS | J2 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | LSM303AGR | TheSummitProject:PQFN50P200X200X100-12N | U6 |
| 1 | MAX-M10S-00B | TheSummitProject:XCVR_MAX-M10S-00B | U7 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J5 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | NPM1300-CAAA-R | TheSummitProject:QFN32_5X5_NOR | U1 |
| 1 | PKLCS1212E4001-R1 | Buzzer_Beeper:Buzzer_Murata_PKLCS1212E | BZ1 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | PWR_BTN | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | PWR_LED | LED_SMD:LED_RGB_1210 | D1 |
| 1 | RAK4630 | TheSummitProject:RAK4630 | U8 |
| 1 | RCC | TestPoint:TestPoint_Pad_D1.0mm | RCC1 |
| 1 | SN74AVC2T245RSWR | TheSummitProject:QFN40P180X140X55-10N | U9 |
| 1 | STM32U5F7VJT6 | TheSummitProject:QFP50P1600X1600X160-100N | IC1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | Screen FPC | Connector_FFC-FPC:TE_4-1734839-0_1x40-1MP_P0.5mm_Horizontal | J4 |
| 1 | TPS62840DLCR | TheSummitProject:VSON8_2P1X1P6_TEX | U4 |
| 1 | TS3USB30EDGSR | Package_SO:TSSOP-10_3x3mm_P0.5mm | U10 |
| 1 | USB C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB-C1 |
| 1 | VSYS | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | VSYS1 |
| 1 | X | Capacitor_SMD:C_0603_1608Metric | C7 |
More from Da-Dog/the-summit-project-hardware
1Similar boards
- 2 layers100 × 50 mm
BPV4 CollarEVAL
rees3901/BluepawsV4
version 4 of my on-going cat tracker project. this differs in structure in that both the TX collar and Rx homehub will be in the same repo to ensure intercompatability
58 parts - 2 layers
- 4 layers50 × 6 mm
- 4 layers44.5 × 50.6 mm
- 4 layers25.4 × 25.4 mm
Zeo1.2 devboard
zeodotdev/zeo-boards
ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.
92 parts3 - 2 layers68.7 × 110.3 mm
- 4 layers41 × 33 mm
Darknet smao
dcbokonon/darknet-smao
Darknet SMAO: Meshtastic LoRa+BLE mesh node SAO for DEF CON 34
36 parts4 - 2 layers89.8 × 70.8 mm
Rak4630-antenna
tangles-0/cyberdeck-scout
// #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…
5 parts6
Questions
How big is the TheSummitProject PCB?
It measures 53 × 80 mm and has 6 copper layers, 1.6 mm thick.
What parts does the TheSummitProject use?
108 parts, built around the STM32U5F7VJT6, MAX-M10S-00B, RAK4630 and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TheSummitProject KiCad files?
From the Da-Dog/the-summit-project-hardware repository on GitHub, at the commit this page was made from: the board is TheSummitProject.kicad_pcb and its schematic TheSummitProject.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TheSummitProject design in my own project?
Its repository states no licence, so its author keeps all rights: ask Da-Dog before reusing the design.