4 layers194.4 × 114.3 mm
Pocket reform keyboard kailh ortho
torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
309 parts1
6 layers151 × 88 mm
Pocket reform motherboard
torlye/pocket-reform1My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
- Size
- 151 × 88 mm
- Copper layers
- 6
- Thickness
- 1 mm
- Parts
- 443
- Nets
- 618
- Pads
- 2,042
- Tracks, vias
- 6,707, 1,318
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Apr 2026
- Updated
- 6 Oct 2026
Overview
Pocket reform motherboard is an open-source printed circuit board by torlye, from the torlye/pocket-reform repository on GitHub. It is a 6-layer board of 151 × 88 mm with 443 parts on 618 nets, routed with 6,707 tracks and 1,318 vias.
It is built around the 74LVC1G34Z, CY7C65215-32LTXI and DM3AT-SF-PEJM5, with the TPD4E02B04DQAR, TS3USB30EDGSR-TP and TXS0108EPW among its other parts. Its parts include 167 resistors, 153 capacitors, 23 ICs, 12 connectors and 6 inductors. It belongs with the computers and single-board computers boards of this library.
Main components
8
74LVC1G34Z
SOT-553-5-40℃~+125℃ 1 1 1.65V~5.5V 1.6ns@5V,50pF 10uA 32mA 32mA 74LVC Power-off isolation Push-pull Unidirectional SOT-553-5 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
CY7C65215-32LTXI
QFN-32QFN-32-EP(5x5) USB Converters ROHSInfineon TechnologiesUSB Converters
DM3AT-SF-PEJM5
SMD-25℃~+85℃ 1.68mm Connector and Ejector MicroSD Card (TF Card) No Push-Push SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card Connector
TPD4E02B04DQAR
USON-10(1x2.5)-40℃~+125℃ 0.33pF 10nA 17W@8/20us 2A@8/20us 3.6V 7.5V 8.8V Bidirectional Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
TS3USB30EDGSR-TP
MSOP-10L-40℃~+85℃ 1.1GHz 1.2us 11Ω 2.5V~5.5V 200ps 20us 4pF MSOP-10L Analog Switches, Multiplexers ROHSTECH PUBLICAnalog Switches, Multiplexers
TXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
AT24CS02-STUM-T
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 2Kbit 3mA 450ns、900ns 5ms 6uA Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
19-337/R6GHBHC-A01/2T
SMD-6P,1.6x1.6mm120° SMD-6P,1.6x1.6mm RGB LEDs ROHSEverlight ElectronicsRGB LEDs
README
README.mdMNT Pocket Reform: Swapped Ctrl and Hyper keys
This fork modifies pocket-reform-keyboard-fw to swap the position of the Left Ctrl and Hyper keys on the keyboard.
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
This fork also adds a few new key combinations:
| Shortcut | Function |
|---|---|
| HYPER+V | Volume up |
| HYPER+C | Volume down |
| HYPER+; | Print screen |
First-time setup
Run ./install-fw-dependencies.sh
Building and flashing
- cd to
pocket-reform-keyboard-fw/pocket-hid - Run
./build.shto build - Run the command
sudo sleep 5 && ./flash.sh - Enter your sudo password (if necessary) to begin the sleep
- Press Hyper+Enter and then x on the keyboard to enter firmware upload mode
- Wait for flashing to complete and for the controller to reset
Original README follows:
MNT Pocket Reform (Research Project)
This repository contains specifications, schematics, PCB and case designs, and firmware source code for the MNT Pocket Reform laptop.
License
Copyright 2021 MNT Research GmbH.
The following licenses are used in the project, unless specified differently in a particular subfolder:
- Schematics, PCBs: CERN-OHL-S v2
- Other documentation, artwork, photos and drawings that are not trademarks (see below): CC-BY-SA 4.0
- Software, firmware: Various. GPL 3.0 if not specified otherwise in the file/subdirectory.
The "MNT" and "MNT REFORM" logos are trademarks of MNT Research GmbH. You may not use these in derived works. The reason for this is that we cannot be responsible for regulatory issues with derived boards and we cannot support them. If someone sees an MNT brand on a product, it has to be clear that it comes from MNT Research and not from a third party.
Parts
443| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C13, C101, C104, C108, C109, C121, C127, C128, C130, C131, C132, C137, C138, C142, C143 +60 |
| 44 | 0 | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R103, R104, R105, R106, R107, R108, R109, R116, R118, R122, R123, R124, R133 +28 |
| 43 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R111, R113, R114, R115, R117, R119, R121, R125, R127, R128, R130, R131, R134, R135, R138 +27 |
| 22 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C12, C39, C47, C105, C107, C112, C115, C129, C133, C136, C141, C152, C153, C157, C158 +6 |
| 18 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21 +2 |
| 14 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R16, R29, R34, R35, R36, R45, R58, R60, R61, R63, R71, R110, R165 |
| 12 | 22uF | Capacitor_SMD:C_0603_1608Metric | C6, C14, C15, C16, C17, C18, C116, C117, C118, C119, C120, C134 |
| 9 | 100k | Resistor_SMD:R_0402_1005Metric | R17, R51, R69, R70, R87, R91, R112, R150, R157 |
| 9 | 4.7k | Resistor_SMD:R_0402_1005Metric | R25, R42, R43, R57, R59, R95, R101, R120, R161 |
| 8 | 0.22uF | Capacitor_SMD:C_0402_1005Metric | C85, C86, C88, C89, C90, C91, C92, C93 |
| 8 | 100@100MHz 3A | Inductor_SMD:L_0603_1608Metric | FB2, FB9, FB10, FB12, FB13, FB14, FB15, FB16 |
| 8 | 2.2k | Resistor_SMD:R_0402_1005Metric | R32, R33, R64, R89, R93, R132, R137, R158 |
| 7 | 33 | Resistor_SMD:R_0402_1005Metric | R55, R76, R77, R79, R80, R82, R86 |
| 6 | AP22615AWU-7 | Package_TO_SOT_SMD:SOT-23-6 | U12, U29, U32, U36, U40, U41 |
| 6 | TPD4E02B04DQA | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U15, U16, U19, U20, U21, U22 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C26, C36, C111, C125, C147 |
| 5 | 470nF | Capacitor_SMD:C_0603_1608Metric | C8, C11, C82, C113, C114 |
| 5 | 47k | Resistor_SMD:R_0402_1005Metric | R73, R97, R98, R99, R100 |
| 4 | 47uF | Capacitor_SMD:C_0603_1608Metric | C83, C123, C124, C126 |
| 4 | 75 1% | Resistor_SMD:R_0402_1005Metric | R37, R39, R40, R41 |
| 4 | DNP | Resistor_SMD:R_0402_1005Metric | R21, R74, R78, R88 |
| 4 | LED_RED | LED_SMD:LED_0603_1608Metric | D1, D8, D9, D23 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 4 | TS3USB30EDGSR | Package_SO:VSSOP-10_3x3mm_P0.5mm | U2, U30, U31, U37 |
| 3 | 47uF | Capacitor_SMD:C_1206_3216Metric | C102, C103, C135 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C110, C122 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C94, C100 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C22, C24 |
| 2 | 15uH | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L5, L6 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C21, C23 |
| 2 | 22k | Resistor_SMD:R_0402_1005Metric | R83, R84 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C67, C106 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R47, R48 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C41, C146 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 4.99k | Resistor_SMD:R_0402_1005Metric | R92, R126 |
| 2 | 49.9 | Resistor_SMD:R_0402_1005Metric | R198, R199 |
| 2 | LM62460 | footprints:CONV_LM61495QRPHRQ1 | U6, U28 |
| 2 | MountingHole_Pad | footprints:WA-SMSI-M2 | H8, H9 |
| 2 | NGFF-Mount1 | footprints:WA-SMSI-M2 | H5, H7 |
| 2 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW2, SW3 |
| 2 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U13, U24 |
| 2 | USB_C_Receptacle | footprints:MOLEX_105450-0101 | J3, J14 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 09452812561 | footprints:09452812561 | J4 |
| 1 | 1-2199230-6 | footprints:TE_1-2199230-6 | J10 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C52 |
| 1 | 124k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 12MHz 12pF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 12uH | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L1 |
| 1 | 19-337/R6GHBHC-A01/2T | footprints:LED_19-337_R6GHBHC-A01_2T | D10 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | 2.2uH | Inductor_SMD:L_Coilcraft_XAL6060-XXX | L4 |
| 1 | 2199230-5 | footprints:TE_2199230-5 | J12 |
| 1 | 22uF | Capacitor_SMD:C_Elec_4x5.4 | C4 |
| 1 | 24.9k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 24MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 27k | Resistor_SMD:R_0402_1005Metric | R90 |
| 1 | 3-2328724-1 | footprints:TE_3-2328724-1 | J13 |
| 1 | 3.3uH | Inductor_SMD:L_Coilcraft_XAL6060-XXX | L3 |
| 1 | 3.3uH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 43.2k | Resistor_SMD:R_0402_1005Metric | R102 |
| 1 | 470k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C5 |
| 1 | 6.8k | Resistor_SMD:R_0402_1005Metric | R129 |
| 1 | 74LVC1G34 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U7 |
| 1 | 8.25k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 9.53K 1% | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 90.9K 1% | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | AT24CS02-STUM | Package_TO_SOT_SMD:SOT-23-5 | U33 |
| 1 | CHARGER | Connector_JST:JST_PH_S9B-PH-SM4-TB_1x09-1MP_P2.00mm_Horizontal | J1 |
| 1 | CONN_HEAD | Connector_JST:JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal | J18 |
| 1 | CONN_SPK | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J15 |
| 1 | CY7C65215-32LTXI | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U38 |
| 1 | Conn_01x20 | Connector_FFC-FPC:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J9 |
| 1 | Conn_01x33 | Connector_FFC-FPC:Hirose_FH12-33S-0.5SH_1x33-1MP_P0.50mm_Horizontal | J11 |
| 1 | DM3AT-SF-PEJM5 | footprints:DM3AT-SF-PEJM5 | J2 |
The 405 most common of 443 parts.
More from torlye/pocket-reform
6- 2 layers154 × 84.5 mm
Pocket reform keyboard
torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
143 parts1 - 4 layers41 × 65.5 mm
Pocket reform charger
torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
74 parts1 - 4 layers27.6 × 95 mm
Pocket reform wifi
torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
42 parts1 - 4 layers66 × 24 mm
Nref wifi m2
torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
36 parts1 - 2 layers17.6 × 95 mm
Pocket reform headphones
torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!
15 parts1
Similar boards
- 6 layers151 × 88 mm
- 6 layers50 × 33 mm
CastleBox
zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
57 parts1 - 4 layers88 × 35.8 mm
- 4 layers101.8 × 67.8 mm
- 2 layers68.6 × 53.3 mm
- 4 layers45.6 × 45.6 mm
- 4 layers83.5 × 34.4 mm
- 2 layers139.9 × 92.8 mm
Keyboard
Tybuu/Keyboard
The Tybeast Ones HE is a split hall effect mechanical keyboard heavily inspired by the Corne. Written using the Rust Embassy framework.
80 parts
Questions
How big is the Pocket reform motherboard PCB?
It measures 151 × 88 mm and has 6 copper layers, 1 mm thick.
What parts does the Pocket reform motherboard use?
443 parts, built around the 74LVC1G34Z, CY7C65215-32LTXI, DM3AT-SF-PEJM5 and TPD4E02B04DQAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pocket reform motherboard KiCad files?
From the torlye/pocket-reform repository on GitHub, at the commit this page was made from: the board is pocket-reform-motherboard/pocket-reform-motherboard.kicad_pcb and its schematic pocket-reform-charger/pocket-reform-charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pocket reform motherboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask torlye before reusing the design.