Boards using the LIS2MDL

46 boards

Boards in 44 GitHub repositories, designed in KiCad, that use the LIS2MDL by STMicroelectronics (-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHS). See how each wires it, with its parts, size, README and files; the LIS2MDL’s symbol, footprint and pinout are on its own page.

6 layers76.2 × 20.3 mm
DEV G2-NANO
theta-machines/DEV-G2-NANO
The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.
141 parts346CERN-OHL-P-2.0
6 layers39.5 × 39.5 mm
P4eregrine
anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor
359 parts21
8 layers42.2 × 67.2 mm
OBC PCB
timohueser/OpenBikeComputer
Open source Bikecomputer with a focus on exploration and adventure.
186 parts11GPL-3.0
4 layers84 × 74.5 mm
Linuxpocket.kicad pcb largebott
sam-chami/zPocket
Modular, pocket computer.
92 parts5
4 layers36 × 36 mm
TrackMAG
mupfdev/TrackMAG
An open hardware development board primarily intended for the development of accessible input devices.
58 parts3
4 layers66 × 60 mm
MainFlightComputer
RockSat-X/RSXVT2026
Our experiment aims to evaluate the use of optical navigation with Commercial-off-the-Shelf (COTS) products for use in spaceflight applications.
72 parts3MIT
4 layers42 × 65 mm
Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT
4 layers112.7 × 122 mm
Panel
ioteratech/bluetera-hardware
Bluetera hardware repository
1,033 parts2MIT
2 layers91.5 × 100 mm
Trailmap
katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)
57 parts2
4 layers35.1 × 77 mm
Euroc controller
aesirkth/fjalar_flight_controller
A simpler flight controller
94 parts1
6 layers34 × 56 mm
VLF5
McMaster-Rocketry-Team/VLF5

106 parts1
4 layers107 × 72 mm
RC Car Controller
RamyMawal/Esp32-S3-Design

98 parts1
2 layers31.5 × 75 mm
Mcu board
0sleep/lwLIDAR
Open-source light-weight 3D LiDAR based on a flexible PCB
91 partsAGPL-3.0
2 layers80 × 80 mm
VECTRON V1
arudhranpk/VECTRON_V1
This is a custom made flight computer designed for sounding rockets.
161 parts
4 layers41.6 × 42 mm
IEE Drone 2026
CalebJM04/IEEE-2026-UAV
Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray
54 parts
4 layers70 × 50 mm
DumbFCC
Curtis-05/DumbFCC
Custom Flight controller for ENG 4012 Aerospace Design Project 4 2025/26 via Glasgow University.
79 partsMIT
2 layers7.2 × 41.9 mm
Sensor puck
david072/sensor_puck

60 parts
2 layers83.8 × 58.4 mm
Sensor Shield
glenn-andrews/Sensor_Shield
Arduino Demo Sensor Shield
70 parts
4 layers17.8 × 10.2 mm
MicroIMU
hlord2000/MicroIMU

12 partsCERN-OHL-P-2.0
2 layers63.5 × 24 mm
Cansatrecruit
hyonis-png/satellitepcb
A custom PCB designed in KiCad to integrate an IMU (Inertial Measurement Unit) and a magnetometer for a university satellite design project.
16 parts
2 layers54.5 × 50 mm
Carte principale
INSA-GEI/arm-ada
Repository for 1st generation of INSA handled device used in ADA teaching
25 partsGPL-3.0
4 layers59.9 × 88.1 mm
Schematics
janc18/ESP32-watchdog
Esp32-Watch
50 partsMIT
2 layers53.5 × 35 mm
Compass
joshitha-c/compass
A compact electronic compass and environmental sensing board built around the STM32WB35CEU6A microcontroller. The design combines a 3-axis magnetometer, barometric pressure sensor, USB-C connectivity, and BLE capability…
45 parts
4 layers60.8 × 59.3 mm
Imu
kayneyao/localization-io
A breakout board for the LSM6DSL 6 axis accel-gyro combo and the LIS2MDL 3 axis mag
45 parts