
Pcb droit
INSA-GEI/arm-ada
Repository for 1st generation of INSA handled device used in ADA teaching

Repository for 1st generation of INSA handled device used in ADA teaching
Carte principale is an open-source printed circuit board by INSA-GEI, from the INSA-GEI/arm-ada repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 54.5 × 50 mm with 25 parts on 62 nets, routed with 541 tracks and 41 vias.
It is built around the 74AHC1G125GW, ESP-WROOM-02 and ARDUINO UNO R3, with the BMP280, LIS2MDL and 74LS166AP-E among its other parts. Its parts include 8 capacitors, 6 ICs, 5 connectors and 2 resistors. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7 |
| 3 | SJ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | TE-FFC-10-0.5 | Insa:FFC-10-0.5 | P1, P2 |
| 1 | 220nF | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | 74LS166 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | Arduino_UNO_R3 | Insa:Arduino_UNO_R3_Pin_Only | J1 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | ESP-WROOM-02 | RF_Module:ESP-WROOM-02 | U1 |
| 1 | LIS2MDL | Insa:LGA-12_2x2mm_P0.5mm-slim | U7 |
| 1 | LOGO | Insa:insa-image | Logo1 |
| 1 | LSM6DS3 | Insa:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y-slim | U2 |

INSA-GEI/arm-ada
Repository for 1st generation of INSA handled device used in ADA teaching

INSA-GEI/arm-ada
Repository for 1st generation of INSA handled device used in ADA teaching


arudhranpk/VECTRON_V1
This is a custom made flight computer designed for sounding rockets.

aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware

ZachS07/RP2040-IMU-Altimeter-PCB
Custom PCB motion and altitude data logger. RP2040 microcontroller with onboard IMU, barometric sensor, and flash storage. It's suitable for model rockets, drones, and other applications.


subbumani12/flightcontroller
A compact STM32F411-based flight controller PCB designed in KiCad for multirotor UAVs and embedded flight-control applications.


It measures 54.5 × 50 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the 74AHC1G125GW, ESP-WROOM-02, ARDUINO UNO R3 and BMP280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the INSA-GEI/arm-ada repository on GitHub, at the commit this page was made from: the board is hardware/pcb/carte_principale/carte_principale.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).