

VECTRON V1
This is a custom made flight computer designed for sounding rockets.
- Size
- 80 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 161
- Nets
- 145
- Pads
- 567
- Tracks, vias
- 1,066, 754
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Aug 2025
- Updated
- 16 Jan 2026
Overview
VECTRON V1 is an open-source printed circuit board by arudhranpk, from the arudhranpk/VECTRON_V1 repository on GitHub. It is a 2-layer board of 80 × 80 mm with 161 parts on 145 nets, routed with 1,066 tracks and 754 vias.
It is built around the BMP280, LIS2MDL and W25Q128JVSIQ, with the TPS563201, ISM330DHCX and PESD5V0U1BB among its other parts. Its parts include 57 capacitors, 41 resistors, 19 connectors, 11 diodes and 8 ICs. It belongs with the STM32 boards of this library.
Main components
12BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsLIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTPS563201
UncategorisedTexas InstrumentsISM330DHCX
LGA-14(2.5x3)-40℃~+105℃ 1.71V~3.6V 16bit 3uA 9KB IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±4000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersPESD5V0U1BB
SOD-5231 10V 2.5pF 200nA 5V 6V ESD IEC 61000-4-4 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)B3F-1000
插件-4P,6x6mm-25℃~+70℃ 1,000,000 cycles 1N 24V 4.3mm 50mA 6mm 6mm PC Pin Round Button SPST-NO Through Hole 插件-4P,6x6mm Tactile Switches ROHSOmronTactile Switches1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesBLM18AG121SN1D
UncategorisedUnknown makerIRLML2502TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.2V 12nC 20V 4.2A 45mΩ@4.5V 66pF 740pF 90pF N-Channel SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsSLESD5Z5C
SOD-523-40℃~+125℃ 1 1uA 200W@8/20us 30pF 5V 6.7V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-4 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSSlkorESD And Surge Protection (TVS/ESD)SIS447DN
PowerPAK1212-8-55℃~+150℃ 1 P-Channel 18A 20V 3.7W 400mV 5.59nF 57.5nC@10V 7.1mΩ@10V PowerPAK1212-8 MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.mdVECTRON-V1
Parts
161| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C12, C15, C17, C18, C19, C20, C23, C24, C25, C26, C27, C28, C29 +13 |
| 21 | 100nf | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C11, C13, C14, C21, C22, C33, C39, C40, C48, C49, C50, C52 +5 |
| 21 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R13, R14, R15, R19, R20, R22, R23, R24, R25, R26, R27, R28, R29 +5 |
| 6 | Screw_01x03 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J9, J10, J11, J12, J13, J14 |
| 4 | 01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J16, J17, J18 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric | R11, R17, R43, R44 |
| 4 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 4 | Mount_Hole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | white | LED_SMD:LED_0603_1608Metric | D3, D5, D7, D8 |
| 2 | 0Ω | Resistor_SMD:R_0603_1608Metric | R8, R10 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R4, R39 |
| 2 | 2u2f | Capacitor_SMD:C_0402_1005Metric | C54, C55 |
| 2 | PESD5V0U1BB | Diode_SMD:D_SOD-523 | D9, D10 |
| 2 | SWPA5040S3R3NT 3u3h | Inductor_SMD:L_Sunlord_SWPA5040S | L1, L3 |
| 2 | Screw_01x02 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1, J3 |
| 2 | Screw_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J2, J4 |
| 2 | TPS563201 | Package_TO_SOT_SMD:SOT-23-6 | U5, U7 |
| 2 | TSA017A2518B | TSA017A2518B:TSA017A2518B | S1, S2 |
| 1 | 01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | 01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | 10Ω | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 10Ω | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 11pf | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | 18pf | Capacitor_SMD:C_0402_1005Metric | C36 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 220nf | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 22pf | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 22Ω | Resistor_SMD:R_0603_1608Metric | R49 |
| 1 | 27uh | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 27Ω | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 33K2 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 33pf | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 360 | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 54k9 | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 560 | Resistor_SMD:R_0603_1608Metric | R48 |
| 1 | 750 | Resistor_SMD:R_0603_1608Metric | R41 |
| 1 | BLM18AG121SN1D | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Multicomp_BC-2001_1x2032_1 | BT1 |
| 1 | CL8530A-CLDZ | Buzzer_Beeper:MagneticBuzzer_CUI_CMT-8504-100-SMT | BZ1 |
| 1 | IRLML2502TRPBF | Package_TO_SOT_SMD:TSOT-23 | Q2 |
| 1 | ISM330DHCX | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U3 |
| 1 | LIS2MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U2 |
| 1 | MM5Z10B | Diode_SMD:D_SOD-523 | D2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J8 |
| 1 | NEO-6M-GPS | NEO-6M-GPS:XCVR_NEO-6M-GPS | U4 |
| 1 | SLESD5Z5C | Diode_SMD:D_SOD-523 | D11 |
| 1 | SS24B-Slkor | Diode_SMD:D_SMA | D1 |
| 1 | STM32F407VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U8 |
| 1 | SiS447DN | Package_SO:Vishay_PowerPAK_1212-8_Single | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J19 |
| 1 | U_FL-R-SMT_10_ | digikey-footprints:Coax_Conn_U.FL | J7 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U6 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D6 |
| 1 | YSX321SL-25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | YXC-Y-26 | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Horizontal | Y2 |
The 160 most common of 161 parts.
Similar boards
- 8 layers110 × 181.8 mm

- 8 layers110.3 × 59.1 mm

DFTBoard
SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.
313 parts1 - 8 layers120 × 65.6 mm

- 2 layers

IMU Magnetometer
mohasif2025/IMU-Magnetometer
Custom 2-layer sensor PCB integrating the ISM330DHCX 6-axis IMU and LIS2MDL 3-axis magnetometer with SPI communication, 3.3V power distribution, decoupling, interrupt/data-ready signals, and M2 mounting hardware.
13 parts - 12 layers150 × 150 mm

HG1-DSP
ajisrawi/hologuard-hg1-radar
HoloGuard HG-1: Ku-band GaN 4D holographic (staring MIMO) counter-UAS radar in an EchoGuard-size envelope - system design, antenna, KiCad boards, FreeCAD enclosure, Blender renders, firmware
77 parts2 - 2 layers237.3 × 103.7 mm

- 4 layers144 × 127 mm

Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
394 parts14GPL-3.0 - 2 layers111.5 × 55.8 mm

TechLab
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
103 parts8MIT
Questions
How big is the VECTRON V1 PCB?
It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VECTRON V1 use?
161 parts, built around the BMP280, LIS2MDL, W25Q128JVSIQ and TPS563201. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VECTRON V1 KiCad files?
From the arudhranpk/VECTRON_V1 repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD files/VECTRON_V1.kicad_pcb and its schematic Hardware/KiCAD files/VECTRON_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VECTRON V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask arudhranpk before reusing the design.