Skip to the content
2 layersIMU Magnetometer, the printed circuit board in 3D

Custom 2-layer sensor PCB integrating the ISM330DHCX 6-axis IMU and LIS2MDL 3-axis magnetometer with SPI communication, 3.3V power distribution, decoupling, interrupt/data-ready signals, and M2 mounting hardware. Designed in KiCad as a compact sensor interface for integration with an external microcontroller. (Work in progress)

Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
18
Pads
52
Tracks, vias
165, 29
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Aug 2026
Updated
27 Aug 2026

Overview

IMU Magnetometer is an open-source printed circuit board by mohasif2025, from the mohasif2025/IMU-Magnetometer repository on GitHub. It is a 2-layer board with 13 parts on 18 nets, routed with 165 tracks and 29 vias.

It is built around the LIS2MDL and ISM330DHCX. Its parts include 5 capacitors, 2 ICs and 2 connectors. It belongs with the sensors and measurement boards of this library.

Main components

2

Parts

13
QtyValueFootprintReferences
3100 nFCapacitor_SMD:C_0603_1608MetricC1, C2, C5
1100nFCapacitor_SMD:C_0603_1608MetricC4
1220 nFCapacitor_SMD:C_0603_1608MetricC3
1ISM330DHCXPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU1
1LIS2MDLPackage_LGA:LGA-12_2x2mm_P0.5mmU2
1MCU ConnectorConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ2
1Power ConnectorConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

The 9 most common of 13 parts.

Similar boards

  • 2 layers80 × 80 mmVECTRON V1, the printed circuit board in 3D

    VECTRON V1

    arudhranpk/VECTRON_V1

    This is a custom made flight computer designed for sounding rockets.

    161 parts
  • 12 layers150 × 150 mmHG1-DSP, the printed circuit board in 3D

    HG1-DSP

    ajisrawi/hologuard-hg1-radar

    HoloGuard HG-1: Ku-band GaN 4D holographic (staring MIMO) counter-UAS radar in an EchoGuard-size envelope - system design, antenna, KiCad boards, FreeCAD enclosure, Blender renders, firmware

    77 parts2
  • 6 layers98 × 27.5 mmOvio core, the printed circuit board in 3D

    Ovio core

    korken89/ovio_core

    Work in progress. PCB have arrived for v1.0 of the board and bring-up has started.

    196 parts30
  • 4 layers30.2 × 20.5 mmBLDCM MCU, the printed circuit board in 3D

    BLDCM MCU

    brenocq/bldc-motor

    High-precision BLDC motor and controller development from scratch (in progress...)

    91 parts13MIT
  • 2 layers38.2 × 50.1 mmIMU module, the printed circuit board in 3D

    IMU module

    MohamadAminGhanoum/IMU-board

    planning to make a module that has small sensors on the pcbs, which will give me motion data, which i will track and recieve on either my phone or computer using the usb-c

    21 parts1
  • 4 layers68.8 × 68.6 mmGMWM Analysis Board, the printed circuit board in 3D

    GMWM Analysis Board

    thejamesrhodes/IMU-Quantisation-research-project

    Research into quantisation effects in MEMS gyroscopes using custom STM32 hardware.

    163 parts1MIT
  • 2 layers101.6 × 53.3 mmArduinoMega Ethernet, the printed circuit board in 3D

    ArduinoMega Ethernet

    dmanla/SecureConnectivityDevelopmentPlatform

    A development platform which provides secure connectivity and data logging support while maintaining compatibility with Arduino-Mega hardware and software.

    116 parts
  • 4 layers11.2 × 18 mmImu board, the printed circuit board in 3D

    Imu board

    eshazen/ninjanirs-imu

    IMU and multiplexer designs for ninjaNIRS

    10 parts

Questions

What parts does the IMU Magnetometer use?

13 parts, built around the LIS2MDL and ISM330DHCX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IMU Magnetometer KiCad files?

From the mohasif2025/IMU-Magnetometer repository on GitHub, at the commit this page was made from: the board is IMU+Magnetometer.kicad_pcb and its schematic IMU+Magnetometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IMU Magnetometer design in my own project?

Its repository states no licence, so its author keeps all rights: ask mohasif2025 before reusing the design.