8 layers110.3 × 59.1 mm
DFTBoard
SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.
313 parts1
8 layers120 × 65.6 mm
Prism
Y10-Labs/Prism-PCBRepo for PCB design from Prism
- Size
- 120 × 65.6 mm
- Copper layers
- 8
- Thickness
- 1.6 mm
- Parts
- 229
- Nets
- 335
- Pads
- 1,253
- Tracks, vias
- 8,893, 833
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Mar 2025
- Updated
- 24 Apr 2025
Overview
Prism is an open-source printed circuit board by Y10-Labs, from the Y10-Labs/Prism-PCB repository on GitHub. It is an 8-layer board of 120 × 65.6 mm with 229 parts on 335 nets, routed with 8,893 tracks and 833 vias.
It is built around the MT3608, S25FL256SAGNFI001 and SC189ASKTRT, with the SC189LSKTRT, SC189ZSKTRT and TLV320AIC3104IRHBR among its other parts. Its parts include 94 capacitors, 90 resistors, 15 ICs, 7 transistors and 7 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
12
MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
S25FL256SAGNFI001
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 130ms@(64KB) 133MHz 2.7V~3.6V 20 Years 256Mbit 340us 70uA SPI WSON-8-EP(6x8) NOR FLASH ROHSInfineon TechnologiesNOR FLASH
SC189ASKTRT
SOT-23-5-40℃~+125℃@(TJ) 1 1.5A 1V~3.3V 2.5MHz 2.9V~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSSEMTECHDC-DC ConvertersSC189LSKTRT
SOT-23-5-40℃~+125℃@(TJ) 1 1.5A 1.8V 2.5MHz 2.9V~5.5V Buck Buck Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSSEMTECHDC-DC ConvertersSC189ZSKTRT
SOT-23-5-40℃~+125℃@(TJ) 1 1.5A 2.5MHz 2.9V~5.5V 3.3V Buck Buck Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSSEMTECHDC-DC Converters
TLV320AIC3104IRHBR
HVQFN-32-EP(5x5)-40℃~+85℃ 1.1V~3.6V、1.525V~1.95V、2.7V~3.6V 8kHz~96kHz Encoder/decoder I2S、I2C HVQFN-32-EP(5x5) Audio Interface ICs ROHSTexas InstrumentsAudio AmplifiersLM3880-1AC
SOT23-6Simple Power Sequencer, Power UP : 1 2 3, Power Down 3 2 1, Timing Designator 60msTexas InstrumentsUncategorised
ASDMB-24.000MHZ-LC-T
SMD2520-4P0℃~+70℃ 1.8V~3.3V 24MHz ±50ppm SMD2520-4P Programmable Oscillators ROHSAbraconProgrammable Oscillators
MT41K256M16TW-107:P
FBGA-96(8x14)0℃~+95℃ 1.283V~1.45V 15mA 32mA 4Gbit 933MHz Auto precharge function、Data mask function、Dynamic on-chip termination、ZQ calibration function、Asynchronous reset function、Write leveling function、Auto self-refresh DDR3L SDRAM FBGA-96(8x14) DDR SDRAM ROHSMicron TechDDR SDRAM
TPS51200DRCR
VSON-10-EP(3x3)-40℃~+85℃@(TA) 1 1mA 2.375V~3.5V Adjustable Buck Built-in Overcurrent Protection、Output discharge、Operating status indication、Output voltage tracking Step-down type VSON-10-EP(3x3) Power Management - Specialized ROHSTexas InstrumentsPower Management - SpecializedXC7Z020CLG484
UncategorisedXILINX
CC0402KRX5R5BB474
0402470nF 6.3V X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdPISM Gaming console - Technical Documentation
Overview
This document provides essential information about the gaming console PCB, an 8-layer board featuring a Xilinx Zynq SoC and various peripherals for a complete gaming system.
Specifications
Core Components
- Processor: Xilinx Zynq 7000 Series (XC7Z020CLG484) - ARM Cortex-A9 with FPGA fabric
- Memory: MT41K256M16HA-125_E DDR3 SDRAM (256MB)
- Storage:
- S25FL256SAGNFI001 Flash Memory (256Mb)
- Micro SD Card slots (2x)
- Audio: TLV320AIC3104 Audio Codec with 3.5mm audio jack output
Sensors & I/O
- Motion Sensing: LSM6DSLTR 6-axis IMU (accelerometer and gyroscope)
- I/O Interfaces:
- JTAG debugging port (AVR-JTAG-10)
- FTDI UART interface
- GPIO connections via horizontal pin socket
- 40-pin FFC/FPC connector
User Interface
- RGB LEDs (2x)
- Blue indicator LEDs (2x)
- Push buttons (4x)
Power Management
- Multiple power domains:
- 1.0V (SC189 regulator)
- 1.8V (SC189 regulator)
- 3.3V (SC189 regulator)
- DC-DC boost converter (MT3608)
- TLV62080 buck converter
- TPS51200 DDR VREF power solution
- LM3880 power sequencers (2x)
Board Layout
- 8-layer PCB design for optimal signal integrity and power distribution
- Careful component placement for thermal management and EMI reduction
- Ground plane isolation for analog/digital sections
Power Requirements
- Input: External DC power via Phoenix connector (J401)
- Boost converter capable of stepping up voltage for display or other high-voltage requirements
- Multiple power filtering capacitors for clean power delivery
Getting Started
- Connect power to the Phoenix connector (J401)
- For programming/debugging, connect to the JTAG interface (CON1)
- For serial communication, connect to the FTDI UART interface (U17)
- Insert SD card with system image into primary SD slot
Programming Information
- Use Xilinx tools (Vivado/Vitis) for programming the Zynq SoC
- Boot modes configurable via resistor settings
- JTAG interface available for direct programming and debugging
Bill of Materials
- See attached BOM file for complete component listing
- Critical components include:
- Xilinx Zynq XC7Z020CLG484 SoC
- MT41K256M16HA-125_E DDR3 SDRAM
- S25FL256SAGNFI001 Flash Memory
- LSM6DSLTR IMU
- TLV320AIC3104 Audio Codec
Revision History
- Rev 1.0 (April 24, 2025) - Initial release
License
© 2025 All Rights Reserved
Parts
229| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | .47uF | Capacitor_SMD:C_0402_1005Metric | C1, C14, C15, C17, C18, C23, C101, C102, C103, C104, C108, C116, C117, C118, C119, C121 +11 |
| 23 | 40.2 1% | Resistor_SMD:R_0402_1005Metric | R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64, R65, R66 +7 |
| 17 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C10, C11, C13, C26, C33, C41, C51, C54, C58, C125, C126, C128, C129, C130 +1 |
| 15 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5, C9, C19, C20, C24, C27, C42, C57, C59, C66, C100, C114, C115, C122, C127 |
| 12 | .1uF | Capacitor_SMD:C_0402_1005Metric | C39, C52, C53, C56, C62, C63, C94, C95, C96, C97, C107, C131 |
| 10 | 100 | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15, R16, R19, R20, R22, R23 |
| 10 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R47, R48, R703, R704, R705, R706, R707, R708, R709, R710 |
| 9 | 20k | Resistor_SMD:R_0402_1005Metric | R25, R91, R92, R93, R94, R95, R96, R97, R106 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R29, R101 |
| 7 | 100uF | Capacitor_SMD:C_1210_3225Metric | C6, C12, C25, C28, C67, C99, C123 |
| 7 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R74, R98, R103, R104 |
| 7 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q8 |
| 5 | .01uF | Capacitor_SMD:C_0402_1005Metric | C98, C105, C106, C110, C120 |
| 4 | 150 | Resistor_SMD:R_0402_1005Metric | R21, R24, R78, R102 |
| 4 | 2.2uH | Capacitor_SMD:C_1812_4532Metric | L1, L2, L3, L4 |
| 4 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3305A | SW701, SW702, SW703, SW704 |
| 3 | .05 | Resistor_SMD:R_2512_6332Metric | R88, R89, R90 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R77, R105, R701 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C43, C44, C45 |
| 3 | 47uF | Capacitor_SMD:C_0805_2012Metric | C7, C32, C61 |
| 3 | 80.6 1% | Resistor_SMD:R_0402_1005Metric | R50, R75, R76 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R33 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C701, C702 |
| 2 | 240 1% | Resistor_SMD:R_0402_1005Metric | R7, R49 |
| 2 | 47 | Resistor_SMD:R_0402_1005Metric | R26, R301 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R99, R601 |
| 2 | BLUE LED | Capacitor_SMD:C_0603_1608Metric | D4, D7 |
| 2 | LED_RGB | DFTcustom:PLCC6-SM-RGB-LED | D1, D2 |
| 2 | LM3880 | Package_TO_SOT_SMD:SOT-23-6 | U1, U2 |
| 2 | Micro_SD_Card_Det | DFTcustom:AMPHENOL-114-00841-68 | J8, J601 |
| 1 | 120R, 100 MHz, size 0603 | Capacitor_SMD:C_0603_1608Metric | FB1 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 24.9 1% | Resistor_SMD:R_0402_1005Metric | R100 |
| 1 | 30K | Resistor_SMD:R_0402_1005Metric | R702 |
| 1 | 330uF | Capacitor_SMD:C_1206_3216Metric | C22 |
| 1 | 4.7uH | Capacitor_SMD:C_1812_4532Metric | L701 |
| 1 | 47uF | Capacitor_SMD:C_1210_3225Metric | C113 |
| 1 | 49.9k | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | ABRACON-ASDMB | XTAL_ASDMB-24.000MHZ-LC-T:XTAL_ASDMB-24.000MHZ-LC-T | U18 |
| 1 | AUDIO JACK | DFTcustom:RA49C14B | J3 |
| 1 | AVR-JTAG-10 | DFTcustom:XilinxJTAG | CON1 |
| 1 | Conn_01x02 | Phoenix_custom:PHOENIX_1748167 | J401 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J702 |
| 1 | D_Schottky | Diode_SMD:Nexperia_CFP3_SOD-123W | D701 |
| 1 | FFC2B28-40-G | FFC2B28-40-G:GCT_FFC2B28-40-G | J701 |
| 1 | FTDITypeUART | DFTcustom:FTDI_CONN | U17 |
| 1 | GNDTIE | DFTcustom:gndtie | GT1 |
| 1 | LSM6DSLTR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U23 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U701 |
| 1 | MT41K256M16HA-125_E | DFTcustom:FBGA-96-DDR3-SDRAM | U16 |
| 1 | S25FL256SAGNFI001 | footprints:Cypress-002-18827-0-0-0 | U19 |
| 1 | SC189 - 1.0V | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SC189 - 1.8V | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | SC189 - 3.3V | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TLV320AIC3104 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm | U9 |
| 1 | TLV62080DSGx | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U5 |
| 1 | TPS51200DRCR | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U8 |
| 1 | xc7z020clg484 | DFTcustom:BGA-484_19.0x19.0mm_Layout22x22_P0.80mm_dia0.40mm | U20 |
Similar boards
- 2 layers31 × 74 mm
- 8 layers55 × 75 mm
- 8 layers150 × 105 mm
Board b routed before 1022 1729
ajisrawi/passive-radar-counter-drone
Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure
228 parts3 - 8 layers22.5 × 69.6 mm
Tinker beetle
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
227 parts1GPL-3.0 - 8 layers106 × 62 mm
- 8 layers100 × 60 mm
YAMMU ControlBoard v05
Zergie/YAMMU
A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.
234 parts107GPL-3.0 - 8 layers123.5 × 58 mm
BLDC MC V1.0
AhmedAbo-Eita/BLDC_Motor_Driver
BLDC Motor Driver hardware and firmware project including power stage, gate driver, protection circuits, and control firmware for sensor-based and/or sensorless BLDC motors.
234 parts1
Questions
How big is the Prism PCB?
It measures 120 × 65.6 mm and has 8 copper layers, 1.6 mm thick.
What parts does the Prism use?
229 parts, built around the MT3608, S25FL256SAGNFI001, SC189ASKTRT and SC189LSKTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Prism KiCad files?
From the Y10-Labs/Prism-PCB repository on GitHub, at the commit this page was made from: the board is Prism.kicad_pcb and its schematic Audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Prism design in my own project?
Its repository states no licence, so its author keeps all rights: ask Y10-Labs before reusing the design.