Skip to the content
11

TPS51200DRCR

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 1mA 2.375V~3.5V Adjustable Buck Built-in Overcurrent Protection、Output discharge、Operating status indication、Output voltage tracking Step-down type VSON-10-EP(3x3) Power Management - Specialized ROHS

Part id
ti/TPS51200DRCR
Category
Power Management, Specialized
Package
VSON-10-EP(3x3)
Pins
11
In stock
52,706 at JLCPCB (C34771)
Used on
12 open-source boards

Overview

The TPS51200DRCR is a power Management, Specialized made by Texas Instruments in a VSON-10-EP(3x3) package with 11 pins. -40℃~+85℃@(TA) 1 1mA 2.375V~3.5V Adjustable Buck Built-in Overcurrent Protection、Output discharge、Operating status indication、Output voltage tracking Step-down type VSON-10-EP(3x3) Power Management - Specialized ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS51200DRC, from KiCad's library) and its footprint (Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm, from KiCad's library), ready for a KiCad board. 52,706 are in stock at JLCPCB (part C34771). 12 open-source boards in 10 repositories on GitHub use it.

Symbol

1REFIN2VLDOIN3VO5VOSNS6REFOUT7EN8GND9PGOOD10VIN
Regulator_Linear:TPS51200DRCFrom KiCad's library

Footprint

11
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mmFrom KiCad's library

From the datasheet

17
Supply, least
2.375 V · VIN, recommended operating minimum · p. 4
Supply, most
3.5 V · VIN, recommended operating maximum · p. 4
Supply, least
1.1 V · VLDOIN, operating minimum · p. 1
Supply, absolute maximum
3.6 V · VIN and VLDOIN, absolute maximum · p. 4
Works from
-40 °C · Operating free-air temperature minimum · p. 4
Works up to
85 °C · Operating free-air temperature maximum · p. 4
Junction, hottest
150 °C · Operating junction temperature absolute maximum · p. 4
Takes working
701 µA · sum of VIN and VLDOIN typical supply currents, enabled, no load, 25°C · p. 5
Takes asleep
65.1 µA · sum of VIN and VLDOIN typical shutdown currents, REFIN = 0, 25°C · p. 5
Takes asleep
200.1 µA · sum of VIN and VLDOIN typical shutdown currents, REFIN > 0.4V, 25°C · p. 5
Current limit
3 A · VO source current limit minimum, VOSNS = 90% × VREFOUT · p. 5
Current limit
3.5 A · VO sink current limit minimum, VOSNS = 110% × VREFOUT · p. 5
Current limit
40 mA · REFOUT source current limit typical, VREFOUT = 0V · p. 6
Junction to air (DRC (VSON))
84.6 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRC (VSON))
55.6 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (DRC (VSON))
30 K/W · Junction-to-board thermal resistance · p. 4
Junction, hottest
125 °C · Junction temperature max · p. 27

What it is and has

8
Regulator
Sink and source DDR termination regulator · p. 1
Remote sensing
VOSNS · p. 1
Buffered reference
±10mA, REFOUT · p. 1
Protection and startup
Built-in soft start, UVLO, and OCL · p. 1
Protection
Thermal shutdown · p. 1
Package
10-Pin VSON with thermal pad · p. 1
Output capacitance
20μF minimum · p. 1
Output monitoring
PGOOD · p. 1

Around it

11
cap 0.1μF
between REFOUT and GND; Ceramic; required, REFOUT must not be left open; total REFOUT capacitance below 0.47uF. · p. 3
cap 1μF to 4.7μF
between VIN and GND; Required ceramic decoupling capacitor. · p. 3
res 1kΩ to 100kΩ
between PGOOD and stable active supply voltage rail; Required pull-up for the open-drain PGOOD output. · p. 11
cap 3 × 10μF, 6.3V
between VO and PGND; C1, C2, C3 in the 3.3VIN DDR3 example; Murata GRM21BR70J106KE76L. · p. 17
cap 1000pF
between REFIN and GND; C4 in the 3.3VIN DDR3 example. · p. 17
cap 4.7μF, 6.3V
between VIN and GND; C6 in the 3.3VIN DDR3 example; Murata GRM21BR60J475KA11L. · p. 17
cap 2 × 10μF, 6.3V
between VLDOIN and PGND; C7, C8 in the 3.3VIN DDR3 example; Murata GRM21BR70J106KE76L. · p. 17
res 10kΩ
between VVDDQ and REFIN; R1, upper feedback divider resistor in the 3.3VIN DDR3 example. · p. 17
res 100kΩ
between PGOOD and VIN; R3 pull-up in the 3.3VIN DDR3 example. · p. 17
cap 2 × 10µF
between VLDOIN and GND; Recommended VLDOIN decoupling capacitance. · p. 25
cap 1 × 4.7µF
between VIN and GND; Recommended VIN decoupling capacitance. · p. 25

Specifications

67
ParameterConditionsAs printedPage
Input voltage(2)REFIN, VIN, VLDOIN, VOSNS; over operating free-air temperature rangemin -0.3 · max 3.6 V4
Input voltage(2)EN; over operating free-air temperature rangemin -0.3 · max 6.5 V4
Input voltage(2)PGND to GND; over operating free-air temperature rangemin -0.3 · max 0.3 V4
Output voltage(2)REFOUT, VO; over operating free-air temperature rangemin -0.3 · max 3.6 V4
Output voltage(2)PGOOD; over operating free-air temperature rangemin -0.3 · max 6.5 V4
Operating junction temperature, TJ TJmin -40 · max 150 °C4
Storage temperature, Tstg Tstgmin -55 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)min -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22C101(2)min -500 · max 500 V4
Supply voltagesVIN; over operating free-air temperature rangemin 2.375 · max 3.5 V4
VoltageEN, VLDOIN, VOSNSmin -0.1 · max 3.5 V4
VoltageREFINmin 0.5 · max 1.8 V4
VoltagePGOOD, VOmin -0.1 · max 3.5 V4
VoltageREFOUTmin -0.1 · max 1.8 V4
VoltagePGNDmin -0.1 · max 0.1 V4
Operating free-air temperature, TA TAmin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJATPS51200, DRC (VSON), 10 PINStyp 84.6 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS51200, DRC (VSON), 10 PINStyp 55.6 °C/W4
Junction-to-board thermal resistance RθJBTPS51200, DRC (VSON), 10 PINStyp 30 °C/W4
Junction-to-top characterization parameter ψJTTPS51200, DRC (VSON), 10 PINStyp 5.5 °C/W4
Junction-to-board characterization parameter ψJBTPS51200, DRC (VSON), 10 PINStyp 30.1 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)TPS51200, DRC (VSON), 10 PINStyp 10.9 °C/W4
Supply current IINTA = 25°C, VEN = 3.3V, No Loadtyp 0.7 · max 1 mA5
Shutdown current IIN(SDN)TA = 25°C, VEN = 0V, VREFIN = 0, No Loadtyp 65 · max 80 uA5
Shutdown current IIN(SDN)TA = 25°C, VEN = 0V, VREFIN > 0.4V, No Loadtyp 200 · max 400 uA5
Supply current of VLDOIN ILDOINTA = 25°C, VEN = 3.3V, No Loadtyp 1 · max 50 uA5
Shutdown current of VLDOIN ILDOIN(SDN)TA = 25°C, VEN = 0V, No Loadtyp 0.1 · max 50 uA5
Input current, REFIN IREFINVEN = 3.3 Vmax 1 uA5
Output DC voltage, VO VVOSNSVREFOUT = 1.25V (DDR1), IO = 0Atyp 1.25 V5
Output DC voltage, VO VVOSNSVREFOUT = 1.25V (DDR1), IO = 0A; voltage deviationmin -15 · max 15 mV5
Output DC voltage, VO VVOSNSVREFOUT = 0.9V (DDR2), IO = 0Atyp 0.9 V5
Output DC voltage, VO VVOSNSVREFOUT = 0.9V (DDR2), IO = 0A; voltage deviationmin -15 · max 15 mV5
Output DC voltage, VO VVOSNSVREFOUT = 0.75V (DDR3), IO = 0Atyp 0.75 V5
Output DC voltage, VO VVOSNSVREFOUT = 0.75V (DDR3), IO = 0A; voltage deviationmin -15 · max 15 mV5
Output DC voltage, VO VVOSNSVREFOUT = 0.675V (DDR3L), IO = 0 Atyp 0.675 V5
Output DC voltage, VO VVOSNSVREFOUT = 0.675V (DDR3L), IO = 0 A; voltage deviationmin -15 · max 15 mV5
Output DC voltage, VO VVOSNSVREFOUT = 0.6V (DDR4), IO = 0Atyp 0.6 V5
Output DC voltage, VO VVOSNSVREFOUT = 0.6V (DDR4), IO = 0A; voltage deviationmin -15 · max 15 mV5
Output voltage tolerance to REFOUT VVOTOL–2A < IVO < 2Amin -25 · max 25 mV5
VO source current Limit IVOSRCLWith reference to REFOUT, VOSNS = 90% × VREFOUTmin 3 · max 4.5 A5
VO sink current Limit IVOSNCLWith reference to REFOUT, VOSNS = 110% × VREFOUTmin 3.5 · max 5.5 A5
Discharge current, VO IDSCHRGVREFIN = 0V, VVO = 0.3V, VEN = 0V, TA = 25°Ctyp 18 · max 25 Ω5
VO PGOOD threshold VTH(PG)PGOOD window lower threshold with respect to REFOUTmin -23.5 · typ -20 · max -17.5 %5
VO PGOOD threshold VTH(PG)PGOOD window upper threshold with respect to REFOUTmin 17.5 · typ 20 · max 23.5 %5
VO PGOOD threshold VTH(PG)PGOOD hysteresistyp 5 %5
PGOOD start-up delay tPGSTUPDLYStart-up rising edge, VOSNS within 15% of REFOUTtyp 2 ms5
Output low voltage VPGOODLOWISINK = 4 mAmax 0.4 V5
PGOOD bad delay tPBADDLYVOSNS is outside of the ±20% PGOOD windowtyp 10 us5
Leakage current(1) IPGOODLKVOSNS = VREFIN (PGOOD high impedance), VPGOOD = VVIN + 0.2Vmax 1 uA5
REFIN voltage range VREFINmin 0.5 · max 1.8 V5
REFIN undervoltage lockout VREFINUVLOREFIN risingmin 360 · typ 390 · max 420 mV5
REFIN undervoltage lockout hysteresis VREFINUVHYStyp 20 mV5
REFOUT voltage tolerance to VREFIN VREFOUTTOL–1mA < IREFOUT < 1mA, VREFIN = 1.25Vmin -12 · max 12 mV6
REFOUT voltage tolerance to VREFIN VREFOUTTOL–1mA < IREFOUT < 1mA, VREFIN = 0.9Vmin -12 · max 12 mV6
REFOUT voltage tolerance to VREFIN VREFOUTTOL–1mA < IREFOUT < 1mA, VREFIN = 0.75Vmin -12 · max 12 mV6
REFOUT voltage tolerance to VREFIN VREFOUTTOL–1mA < IREFOUT < 1mA, VREFIN = 0.675Vmin -12 · max 12 mV6
REFOUT voltage tolerance to VREFIN VREFOUTTOL–1mA < IREFOUT < 1mA, VREFIN = 0.6Vmin -12 · max 12 mV6
REFOUT source current limit IREFOUTSRCLVREFOUT = 0Vmin 10 · typ 40 mA6
REFOUT sink current limit IREFOUTSNCLVREFOUT = 0Vmin 10 · typ 40 mA6
UVLO threshold VVINUVVINWake up, TA = 25°Cmin 2.2 · typ 2.3 · max 2.375 V6
UVLO threshold VVINUVVINHysteresistyp 50 mV6
High-level input voltage VENIHEnablemin 1.7 V6
Low-level input voltage VENILEnablemax 0.3 V6
Hysteresis voltage VENYSTEnabletyp 0.5 V6
Logic input leakage current IENLEAKEN, TA = 25°Cmin -1 · max 1 uA6
Thermal shutdown threshold(1) TSONShutdown temperature; ensured by design, not production testedtyp 150 °C6
Thermal shutdown threshold(1) TSONHysteresis; ensured by design, not production testedtyp 25 °C6

Pins, by the datasheet

10
1 REFIN
Reference input. · p. 3
2 VLDOIN
Supply voltage for the LDO. · p. 3
3 VO
Power output for the LDO. · p. 3
4 PGND
Power ground for the LDO; thermal pad connection. · p. 3
5 VOSNS
Voltage sense input for the LDO; connect to the positive terminal of the output capacitor or the load. · p. 3
6 REFOUT
Reference output; connect to GND through a 0.1uF ceramic capacitor, keep total capacitance below 0.47uF, and do not leave open. · p. 3
7 EN
Connect to SLP_S3 for DDR VTT applications; otherwise use as the ON/OFF input. · p. 3
8 GND
Signal ground. · p. 3
9 PGOOD
Open-drain, power-good indicator. · p. 3
10 VIN
2.5V or 3.3V power supply; requires a 1uF to 4.7uF ceramic decoupling capacitor. · p. 3

Ordering codes, by the datasheet

8
TPS51200DRCR
VSON (DRC) · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCR.A
VSON (DRC) · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCR.B
VSON (DRC) · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCRG4
VSON (DRC) · 3000 units, LARGE T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCT
VSON (DRC) · 250 units, SMALL T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCT.A
VSON (DRC) · 250 units, SMALL T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCT.B
VSON (DRC) · 250 units, SMALL T&R; operating temperature -40 to 85 °C · p. 32
TPS51200DRCTG4
VSON (DRC) · 250 units, SMALL T&R; operating temperature -40 to 85 °C · p. 32

Open-source boards using it

12See all 12
  • 8 layers120 × 60 mmDFTBoard, the printed circuit board in 3D

    DFTBoard

    juliancoy/zynqPCB

    An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection

    299 parts75MIT
  • 6 layers72 × 72 mmECP5 DEV BOARD, the printed circuit board in 3D

    ECP5 DEV BOARD

    BellssGit/Lattice_ECP5_Core_Board_With_DDR3

    Nope

    144 parts12GPL-3.0
  • 10 layers50 × 50 mmFPGA AURA, the printed circuit board in 3D

    FPGA AURA

    alexander-armitage/AURA-FPGA

    An FPGA based SOM for the AURA framework.

    184 parts10MIT
  • 8 layers90 × 65 mmDigital board v1, the printed circuit board in 3D

    Digital board v1

    es-ude/elasticai.hardware

    Schematics and Board design for ElasticNodeHardware

    261 parts4MIT
  • 8 layers217.5 × 187.5 mmBoard c openroute partial, the printed circuit board in 3D

    Board c openroute partial

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    314 parts3
  • 8 layers117.3 × 121.3 mmFPGA dev board, the printed circuit board in 3D

    FPGA dev board

    LZajmi/Artix-7-FPGA-Dev-Board

    This repository contains the design files for the custom Artix-7 XC7A100T-FGG484 FPGA development board. This board is built for high-performance applications such as hardware acceleration, video processing, data…

    366 parts3
  • 8 layers134.5 × 107.2 mmArctic video, the printed circuit board in 3D

    Arctic video

    aerogull/arctic-video

    a wip pcie fpga card designed with video capture in mind

    265 parts1
  • 8 layers110.3 × 59.1 mmDFTBoard, the printed circuit board in 3D

    DFTBoard

    SunnyYoshimitsu/CelestiCall

    An attempt at making a somewhat modern smartphone with many functions.

    313 parts1

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TPS51200DRCR?

Yes. The symbol is Regulator_Linear:TPS51200DRC and the footprint Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS51200DRCR?

VSON-10-EP(3x3), with 11 pins. Its footprint is drawn on this page.

Where is the TPS51200DRCR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS51200DRCR?

JLCPCB lists it as part C34771, with 52,706 in stock; the sellers' links on this page open their listings.

What can replace the TPS51200DRCR?

Parts like it in the library: the TPS51200DRCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS51200DRCR?

12 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.