
DFTBoard
SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.

An attempt at making a somewhat modern smartphone with many functions.
DFTBoard is an open-source printed circuit board by SunnyYoshimitsu, from the SunnyYoshimitsu/CelestiCall repository on GitHub. It is an 8-layer board of 110.3 × 59.1 mm with 313 parts on 439 nets, routed with 12,069 tracks and 874 vias.
It is built around the XC7Z020-1CLG484C, USB3320C-EZK-TR and S25FL256SAGNFI001, with the SC189ASKTRT, SC189LSKTRT and SC189ZSKTRT among its other parts. Its parts include 138 capacitors, 109 resistors, 22 ICs, 11 diodes and 11 transistors. It belongs with the ESP32, RISC-V and FPGA and CPLD boards of this library.
An attempt at making a somewhat modern smartphone with many functions.
CelestiCall is a phone with a somewhat outdated concept that I've come up with for the Summer of 2024. The purpose of the phone? to allow me to learn and get experience on many computer subjects all at once. And what are those "experience" and "subjects" I'm talking about? They're power system design, FPGA design, 3D printing, communication, Linux, web design and many more.
Let me tell about what I see this phone will have as I want this to be unique and with quite a large amount of personal touch up.
Here I'll go into a personal requirement for what I think the smartphone should be and have. I'll describe the software and the hardware along with the type of apps I would like to have running on it.
Requirement:
Hardware: Physical dimesion: Similar to that of Iphone I or the various Window phones. Small and comact as to be able to reach from bottom of the screen to the top.
Computer Hardware: Runs off dual Cortex A9 on an FPGA and hopefully give up to 2GB of RAM. ARM A9 is a relative strong chips that could run many lightweight Linux distro without much problem.
Software: Onboard-based: Android 2.0 would be preferrable It's a widely used distro with a lot of available softwares
Web-based: Something like a personal/homebrew Google Drive and the ability to use a home server as extra computing extension and a NAS as online hard-drive. This would allow the device to be more than it can be
Here's the architecture of the SoC would look like:
Note: if there's an asterisk, it means that that specific part will be custom.
Roadmap
*Software to make calls, use WiFi, send/receive SMS, GPS and take photos in any GNU/linux: Estimated Time: ~5 months
With hardware:
A7670G with ESP32: https://github.com/Xinyuan-LilyGO/LilyGO-T-A76XX
Quectel: https://www.aliexpress.us/item/3256806123411827.html?src=google&gatewayAdapt=glo2usa
With software:
Android 5 for Zedboard: https://github.com/noritsuna/zedroid_system_core?tab=readme-ov-file
Android 4 for Pynq Z2: https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842042/Android+4.2.2+On+Zynq+Getting+Started+Guide
AT commands for the GPRS
Arduino C codes for ESP32 wiFi and BLE*Touchscreen, buttons and audio I/Os: Estimated Time: ~2 months
Note: as of 5/23/2024, I'm still deciding whether to pursue a phone with large or small screens. They could be as large as a modern Iphone Pro Max with screen going up to near 7inch or older phones with screen as small as 3-inch diagnally.
With hardware:
Small 3.1 in screen: https://tailorpixels.com/product/3-1-inch-ips-tft-high-resolution-mipi/
Medium sized 5 in screen: https://tailorpixels.com/product/5-inch-tn-tft-lcd-rgb-800x480-landscape/
Large sized 7 in screen: https://tailorpixels.com/product/7-inch-tn-tft-lcd-rgb-800x480/
With software:
-For starter: a framebuffer in RAM
-End goal: running on a custom GPU (HyperNova)The above two steps will be prototyped via COTS development boards and easy to use breadboard.
*Make a prototype PCB with components:
Estimated Time: ~2 months
Estimated cost: ~$400
1) Start with a simple FPGA board
2) Add peripherals like the WiFI, GPRS and camera
3) Add touchscreen and physical input (buttons)*Design and manufacture outer shell: Estimated Time: ~2 months Estimated cost: ~$50
Design concept: The shell of the phone will be somewhat similar looking to any modern smartphone, however it will be thicker than the norm. This is to be able to accomodate at least two full size USB and HDMI ports along with possibly 2 PMODs interface.
With hardware:
Bambu Lab 3D printer
With software:
Krita for concept art
Solidwork for the end product*End Step: This step will involve the creation of the "bootleg Google Drive" that I've detailed in the beginning along with making a case for the phone.
Rough Project Timeline/Plans:
To do list/learn/plan(6/17):
Start making prototypes of the GPU and the Audio mixer Then integrate them to a HDMI output
GPU: Learn about "CUDA" cores, make a RGB framebuffer of 800 x 600 size for the touchscreen output. Make variable screen resolution for HDMI out. Audio: extend upon school filter projects and DMA sound replay. If too complicated, then make a simple PCM passthrough and FIFO for sound replay from memory.
Integrate both GPU and Audio though the HyperNova top module to output to HDMI, display and audio jack. Add controls to allow versatile displaying. Possibly add possible VGA output for second display via the PMOD (max 64 colors only).
I know this sounds ambitious as going to the moon by oneself. HOWEVER, with the way technology is evolving, I believe it's possible....Please let a student dream.....
Email: huynguyenwork123@gmail.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | .47uF | Capacitor_SMD:C_0402_1005Metric | C1, C14, C15, C17, C18, C101, C102, C103, C104, C108, C112, C116, C117, C118, C119, C121 +16 |
| 23 | 40.2 1% | Resistor_SMD:R_0402_1005Metric | R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64, R65, R66 +7 |
| 22 | .1uF | Capacitor_SMD:C_0402_1005Metric | C39, C52, C53, C56, C62, C64, C68, C70, C71, C72, C77, C79, C81, C82, C107, C131 +6 |
| 20 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C10, C11, C13, C26, C33, C41, C51, C54, C111, C125, C126, C128, C129, C130 +4 |
| 18 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8, R10, R12, R14, R24, R28, R74, R82, R83, R103, R104, R107, R109, R111, R112, R114 +2 |
| 18 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5, C19, C20, C24, C27, C42, C57, C59, C66, C100, C114, C115, C122, C124, C127, C132 +2 |
| 11 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R16, R22, R27, R34, R81, R101 |
| 11 | 100uF | Capacitor_SMD:C_1210_3225Metric | C6, C12, C25, C28, C36, C37, C67, C73, C74, C99, C123 |
| 10 | 20k | Resistor_SMD:R_0402_1005Metric | R23, R25, R91, R92, R93, R94, R95, R96, R97, R106 |
| 7 | .01uF | Capacitor_SMD:C_0402_1005Metric | C93, C98, C105, C106, C109, C110, C120 |
| 6 | 150 | Resistor_SMD:R_0402_1005Metric | R21, R35, R78, R80, R86, R102 |
| 6 | 22R | Resistor_SMD:R_0805_2012Metric | R32, R42, R43, R44, R45, R105 |
| 6 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q5, Q8, Q9, Q10 |
| 5 | 100 | Resistor_SMD:R_0402_1005Metric | R11, R13, R15, R19, R20 |
| 5 | 2.2uH | Capacitor_SMD:C_1812_4532Metric | L1, L2, L3, L4, L6 |
| 5 | 49.9k | Resistor_SMD:R_0402_1005Metric | R17, R29, R108, R110, R116 |
| 5 | BLUE LED | Capacitor_SMD:C_0603_1608Metric | D3, D4, D5, D6, D7 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R33, R36, R39 |
| 4 | 18pF | Capacitor_SMD:C_0402_1005Metric | C75, C76, C84, C85 |
| 4 | 47uF | Capacitor_SMD:C_0805_2012Metric | C7, C32, C61, C113 |
| 4 | MMBTA14-7-F | Package_TO_SOT_SMD:SOT-23-3 | Q2, Q4, Q6, Q11 |
| 3 | .05 | Resistor_SMD:R_2512_6332Metric | R88, R89, R90 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R77, R79, R85 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C38, C43, C45 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C35, C69, C80 |
| 3 | 22pF | Resistor_SMD:R_0805_2012Metric | C143, C144, C145 |
| 3 | 240 1% | Resistor_SMD:R_0402_1005Metric | R7, R46, R49 |
| 3 | 80.6 1% | Resistor_SMD:R_0402_1005Metric | R50, R75, R76 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C138, C146 |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C135, C136 |
| 2 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R47, R48 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R37, R40 |
| 2 | 220uF Tant. | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C40, C44 |
| 2 | 24.000MHZ | ABM3-12.000MHZ-B2-T:XTAL500X320X130N | Y1, Y2 |
| 2 | 330uF | Capacitor_SMD:C_1206_3216Metric | C22, C133 |
| 2 | 8.06k 1% | Resistor_SMD:R_0402_1005Metric | R38, R41 |
| 2 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D10, D11 |
| 2 | LM3880 | Package_TO_SOT_SMD:SOT-23-6 | U1, U2 |
| 2 | MT41K256M16TW-107:P | DFTcustom:FBGA-96-DDR3-SDRAM | U15, U16 |
| 2 | USB3320 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U10, U12 |
| 2 | USB_A | DFTcustom:USB-A-Receptacle-FCI_87583 | J1, J6 |
| 2 | blue | LED_SMD:LED_0805_2012Metric | D8, D9 |
| 1 | 10pF | Capacitor_SMD:C_0805_2012Metric | C140 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C137 |
| 1 | 120R, 100 MHz, size 0603 | Capacitor_SMD:C_0603_1608Metric | FB1 |
| 1 | 24.9 1% | Resistor_SMD:R_0402_1005Metric | R100 |
| 1 | 33pF | Capacitor_SMD:C_0805_2012Metric | C139 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R99 |
| 1 | 5.1V | Diode_SMD:D_SOD-123 | D2 |
| 1 | ABRACON-ASDMB | XTAL_ASDMB-24.000MHZ-LC-T:XTAL_ASDMB-24.000MHZ-LC-T | U18 |
| 1 | AVR-JTAG-10 | DFTcustom:XilinxJTAG | CON1 |
| 1 | CDBMS540LR-HF | Diode_SMD:D_SOD-123 | CDBMS540LR-HF1 |
| 1 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | DMP1045UQ-7 | Package_TO_SOT_SMD:SOT-23 | Q12 |
| 1 | ESP32-C3_SUPERMINI | Y!:MODULE_ESP32-C3_SUPERMINI | U24 |
| 1 | FTDITypeUART | DFTcustom:FTDI_CONN | U17 |
| 1 | GNDTIE | DFTcustom:gndtie | GT1 |
| 1 | HDMI_A | DFTcustom:10029449-111RLF | Je1 |
| 1 | JACK_TRS_4PINS | DFTcustom:SJ-352X-SMT | J2 |
| 1 | LED_RGB | DFTcustom:PLCC6-SM-RGB-LED | D1 |
| 1 | LSM6DSLTR | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U23 |
| 1 | MEMSMIC | SPW2430HR5H-B:MIC_SPW2430HR5H-B | MIC1 |
| 1 | MIC2025-1YMM | SOP65P490X110-8N:SOP65P490X110-8N | U11 |
| 1 | Micro_SD_Card_Det | DFTcustom:AMPHENOL-114-00841-68 | J8 |
| 1 | PCA9306 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U21 |
| 1 | PMOD-Host-x2-GPIO | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Horizontal | PMOD1 |
| 1 | S25FL256SAGNFI001 | Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U19 |
| 1 | SC189 - 1.0V | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SC189 - 1.8V | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | SC189 - 3.3V | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | SIM7100-6-1-15-00-A_REVC | Y!:GCT_SIM7100-6-1-15-00-A_REVC | J4 |
| 1 | SIM_COM_A7670 | Y!:A7670C | U25 |
| 1 | TLV320AIC3104 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm | U9 |
| 1 | TLV62080DSGx | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U5 |
| 1 | TPS51200DRCR | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U8 |
| 1 | TPS62132 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U13 |
| 1 | USB_C_1 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB_C_ESP1 |
| 1 | gsm | Y!:IPEX | AE1 |
| 1 | xc7z020clg484 | DFTcustom:BGA-484_19.0x19.0mm_Layout22x22_P0.80mm_dia0.40mm | U20 |

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.

SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.


RedBulletTooling/crypsis-public
This contains, all files from hardware to software production and all to make Crypsis



ajisrawi/passive-radar-counter-drone
Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure



CopperPilot/Jetson-AI-Cam-CopperPilot
A carrier for Jetson Nano, Xavier NX and TX2 NX with two IMX219 cameras on a 39 mm stereo baseline, dual 4K outputs and CAN.
It measures 110.3 × 59.1 mm and has 8 copper layers, 1.6 mm thick.
313 parts, built around the XC7Z020-1CLG484C, USB3320C-EZK-TR, S25FL256SAGNFI001 and SC189ASKTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SunnyYoshimitsu/CelestiCall repository on GitHub, at the commit this page was made from: the board is Archived concepts/Schematic & PCB (version 0) (outdated)/DFTBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SunnyYoshimitsu before reusing the design.