Skip to the content

PCA9306DCTR

Texas InstrumentsExtended

-40℃~+105℃ 1 1.2V~3.3V 1.8V~5.5V 2 Automatic direction detection、Output enable high-impedance Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C SM-8 Translators, Level Shifters ROHS

Part id
ti/PCA9306DCTR
Category
Translators, Level Shifters
Package
SM-8
Pins
8
In stock
86,891 at JLCPCB (C123752)
Used on
13 open-source boards

Overview

The PCA9306DCTR is a translators, Level Shifter made by Texas Instruments in a SM-8 package with 8 pins. -40℃~+105℃ 1 1.2V~3.3V 1.8V~5.5V 2 Automatic direction detection、Output enable high-impedance Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C SM-8 Translators, Level Shifters ROHS.

PCBKit's library has its KiCad symbol (Interface:PCA9306, from KiCad's library) and its footprint (Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, from KiCad's library), ready for a KiCad board. 86,891 are in stock at JLCPCB (part C123752). 13 open-source boards in 11 repositories on GitHub use it.

Symbol

1GND2VREF13SCL14SDA15SDA26SCL27VREF28EN
Interface:PCA9306From KiCad's library

Footprint

Package_SO:SSOP-8_2.95x2.8mm_P0.65mmFrom KiCad's library

From the datasheet

9
Supply, most
5.5 V · VREF1, recommended operating max; translation requires VREF1 ≤ VREF2 − 0.6 V · p. 5
Supply, absolute maximum
7 V · VREF1, absolute maximum · p. 5
Works from
-40 °C · Operating ambient temperature min · p. 5
Works up to
85 °C · Operating ambient temperature max · p. 5
Junction, hottest
125 °C · Maximum junction temperature · p. 5
A pin gives at most
128 mA · Continuous channel current absolute maximum · p. 5
Junction to air (DCT)
254.1 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to case (DCT)
148.6 K/W · Junction-to-case (top) thermal resistance · p. 6
Junction to board (DCT)
168.8 K/W · Junction-to-board thermal resistance · p. 6

What it is and has

4
Translator channels
2-bit, bidirectional SDA and SCL · p. 1
Compatibility
I2C and SMBus · p. 1
I/O ports
Open-drain I2C · p. 1
Translator channels
2-bit, bidirectional, SDA and SCL · p. 1

Around it

3
res 200 k
between VCC2 and VREF2; Current-limiting bias resistor; VREF2 and EN are connected together. · p. 14
res 200 kΩ
between EN / VREF2 and VDPU; Typical pullup; connect EN to VREF2 for bidirectional clamping. · p. 18
cap 100 pF
between VREF2 and GND; Recommended filter capacitor. · p. 18

Specifications

62
ParameterConditionsAs printedPage
DC reference voltage range VREF1Over operating ambient temperature rangemin -0.5 · max 7 V5
DC reference bias voltage range VREF2Over operating ambient temperature rangemin -0.5 · max 7 V5
Input voltage range(2) VIOver operating ambient temperature rangemin -0.5 · max 7 V5
Input/output voltage range(2) VI/OOver operating ambient temperature rangemin -0.5 · max 7 V5
Continuous channel currentOver operating ambient temperature rangemax 128 mA5
Input clamp current IIKVI < 0max -50 mA5
Maximum junction temperature Tj(max)max 125 °C5
Storage temperature range Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per ANSI/ESDA/JEDEC JS-0011, all pinsmin -1000 · max 1000 V5
Input/output voltage VI/OSCL1, SDA1, SCL2, SDA2min 0 · max 5.5 V5
Reference voltage VREF1To support translation, VREF1 supports 1.2 V to VREF2 - 0.6 Vmin 0 · max 5.5 V5
Reference voltage VREF2For translation, VREF2 must be between VREF1 + 0.6 V and 5.5 Vmin 0 · max 5.5 V5
Enable input voltage ENmin 0 · max 5.5 V5
Pass switch current IPASSmax 64 mA5
Operating ambient temperature TAmin -40 · max 85 °C5
Junction-to-ambient thermal resistance RθJADCT, 8 PINStyp 254.1 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)DCT, 8 PINStyp 148.6 °C/W6
Junction-to-board thermal resistance RθJBDCT, 8 PINStyp 168.8 °C/W6
Junction-to-top characterization parameter ψJTDCT, 8 PINStyp 70.1 °C/W6
Junction-to-board characterization parameter ψJBDCT, 8 PINStyp 167.4 °C/W6
Input clamp voltage VIKII = –18 mA, EN = 0 Vmin -1.2 · max 0 V6
Input leakage current IIHVI = 5 V, EN = 0 Vmax 5 uA6
Input capacitance Ci (EN)VI = 3 V or 0typ 11 pF6
Off capacitance Cio(off)SCLn, SDAn; VO = 3 V or 0, EN = 0 Vtyp 4 · max 6 pF6
On capacitance Cio(on)SCLn, SDAn; VO = 3 V or 0, EN = 3 Vtyp 10.5 · max 12.5 pF6
On-state resistance RONSCLn, SDAn; VI = 0, IO = 64 mA, EN = 4.5 Vtyp 3.5 · max 5.5 Ω6
On-state resistance RONSCLn, SDAn; VI = 0, IO = 64 mA, EN = 3 Vtyp 4.7 · max 7 Ω6
On-state resistance RONSCLn, SDAn; VI = 0, IO = 64 mA, EN = 2.3 Vtyp 6.3 · max 9.5 Ω6
On-state resistance RONSCLn, SDAn; VI = 0, IO = 15 mA, EN = 1.5 Vtyp 25.5 · max 32 Ω6
On-state resistance RONSCLn, SDAn; VI = 2.4 V, IO = 15 mA, EN = 4.5 V; current sink configuration onlymin 1 · typ 6 · max 15 Ω6
On-state resistance RONSCLn, SDAn; VI = 2.4 V, IO = 15 mA, EN = 3 V; current sink configuration onlymin 20 · typ 60 · max 140 Ω6
On-state resistance RONSCLn, SDAn; VI = 1.7 V, IO = 15 mA, EN = 2.3 V; current sink configuration onlymin 20 · typ 60 · max 140 Ω6
tPLH tPLHDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 50 pF; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 Vmin 0 · max 0.8 ns7
tPLH tPLHDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 30 pF; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 Vmin 0 · max 0.6 ns7
tPLH tPLHDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 15 pF; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 Vmin 0 · max 0.3 ns7
tPHL tPHLDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 50 pF; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 Vmin 0 · max 1.2 ns7
tPHL tPHLDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 30 pF; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 Vmin 0 · max 1 ns7
tPHL tPHLDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 15 pF; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 Vmax 0.75 ns7
tPLH tPLHDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 50 pF; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 Vmin 0 · max 1 ns7
tPLH tPLHDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 30 pF; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 Vmin 0 · max 0.7 ns7
tPLH tPLHDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 15 pF; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 Vmin 0 · max 0.4 ns7
tPHL tPHLDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 50 pF; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 Vmin 0 · max 1.3 ns7
tPHL tPHLDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 30 pF; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 Vmin 0 · max 1 ns7
tPHL tPHLDCT; SCL2 or SDA2 to SCL1 or SDA1; CL = 15 pF; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 Vmax 0.75 ns7
tPLH tPLHDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 50 pF; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ωmin 0 · max 0.9 ns7
tPLH tPLHDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 30 pF; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ωmin 0 · max 0.6 ns7
tPLH tPLHDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 15 pF; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ωmin 0 · max 0.4 ns7
tPHL tPHLDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 50 pF; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ωmax 1.7 ns7
tPHL tPHLDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 30 pF; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ωmax 1.4 ns7
tPHL tPHLDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 15 pF; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ωmax 1 ns7
tPLH tPLHDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 50 pF; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ωmin 0 · max 1 ns7
tPLH tPLHDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 30 pF; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ωmin 0 · max 0.6 ns7
tPLH tPLHDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 15 pF; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ωmin 0 · max 0.4 ns7
tPHL tPHLDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 50 pF; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ωmax 2.1 ns7
tPHL tPHLDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 30 pF; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ωmax 1.7 ns7
tPHL tPHLDCT; SCL1 or SDA1 to SCL2 or SDA2; CL = 15 pF; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ωmax 1.3 ns7
Reference voltage VREF2Minimum is VREF1 + 0.6 V; typical at TA = 25°Ctyp 2.1 · max 5 V18
Enable input voltage ENMinimum is VREF1 + 0.6 V; typical at TA = 25°Ctyp 2.1 · max 5 V18
Reference voltage VREF1Typical at TA = 25°Cmin 1.2 · typ 1.5 · max 4.4 V18
Pass switch current IPASSTypical at TA = 25°Ctyp 6 mA18
Reference-transistor current IREFTypical at TA = 25°Ctyp 5 uA18

Pins, by the datasheet

8
1 GND
Ground, 0 V. · p. 4
2 VREF1
Low-voltage-side reference supply voltage for SCL1 and SDA1. · p. 4
3 SCL1
Serial clock, low-voltage side. · p. 4
4 SDA1
Serial data, low-voltage side. · p. 4
5 SDA2
Serial data, high-voltage side. · p. 4
6 SCL2
Serial clock, high-voltage side. · p. 4
7 VREF2
High-voltage-side reference supply voltage for SCL2 and SDA2. · p. 4
8 EN
Switch enable input. · p. 4

Ordering codes, by the datasheet

13
PCA9306DCTR
SSOP (DCT), 8 pins · 3000, LARGE T&R; operating temperature -40 to 85°C · p. 24
PCA9306DCTR.A
SSOP (DCT), 8 pins · 3000, LARGE T&R; operating temperature -40 to 85°C · p. 24
PCA9306DCTT
SSOP (DCT), 8 pins · 250, SMALL T&R; operating temperature -40 to 85°C · p. 24
PCA9306DCTT.A
SSOP (DCT), 8 pins · 250, SMALL T&R; operating temperature -40 to 85°C · p. 24
PCA9306DCUR
VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU or SN lead finish · p. 24
PCA9306DCUR.A
VSSOP (DCU), 8 pins · 3000, LARGE T&R; NIPDAU lead finish · p. 24
PCA9306DCUT
VSSOP (DCU), 8 pins · 250, SMALL T&R; NIPDAU or SN lead finish · p. 24
PCA9306DCUT.A
VSSOP (DCU), 8 pins · 250, SMALL T&R; NIPDAU lead finish · p. 24
PCA9306DQER
X2SON (DQE), 8 pins · 5000, LARGE T&R; NIPDAU or NIPDAUAG lead finish · p. 24
PCA9306DQER.A
X2SON (DQE), 8 pins · 5000, LARGE T&R; NIPDAUAG lead finish · p. 24
PCA9306DQER.B
X2SON (DQE), 8 pins · 5000, LARGE T&R; NIPDAUAG lead finish · p. 24
PCA9306YZTR
DSBGA (YZT), 8 pins · 3000, LARGE T&R; SNAGCU ball material · p. 24
PCA9306YZTR.B
DSBGA (YZT), 8 pins · 3000, LARGE T&R; SNAGCU ball material · p. 24

Open-source boards using it

13See all 13
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 8 layers110.3 × 59.1 mmDFTBoard, the printed circuit board in 3D

    DFTBoard

    SunnyYoshimitsu/CelestiCall

    An attempt at making a somewhat modern smartphone with many functions.

    313 parts1
  • 2 layers72 × 138 mmSchaltplan, the printed circuit board in 3D

    Schaltplan

    michaelgr22/can-to-go-system

    39 parts
  • 4 layers220 × 100 mm3U220-Support, the printed circuit board in 3D

    3U220-Support

    PTrUNB/3U220mm-Odoird-H2-H3-PSU

    Basic DCDC 2.8 to 48VDc power supply included

    198 parts
  • 2 layers80 × 46 mmIMU PLACEMENT STUDY, the printed circuit board in 3D

    IMU PLACEMENT STUDY

    SpaceCadetJ/LoRa-Autonomous-Boat

    An embedded-systems project spanning STM32 firmware, LoRa communication, PCB reconstruction and a documented V2 redesign.

    130 parts
  • 4 layers100 × 120 mmETROC to FPGA, the printed circuit board in 3D

    ETROC to FPGA

    sungbeom0324/ETROC_to_FPGA

    ETROC_to_FPGA board info : custom DAQ for MTD in KU

    91 parts
  • 4 layers64 × 40 mmWiringHarness, the printed circuit board in 3D

    WiringHarness

    TadAtThayer/MazeController

    Arduino Shield for ES28 project

    37 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PCA9306DCTR?

Yes. The symbol is Interface:PCA9306 and the footprint Package_SO:SSOP-8_2.95x2.8mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PCA9306DCTR?

SM-8, with 8 pins. Its footprint is drawn on this page.

Where is the PCA9306DCTR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the PCA9306DCTR?

JLCPCB lists it as part C123752, with 86,891 in stock; the sellers' links on this page open their listings.

What can replace the PCA9306DCTR?

Parts like it in the library: the TXS0102DCTR by Texas Instruments, the SN74LVC2T45DCTR by Texas Instruments, the SN74LVC2T45DCTT by Texas Instruments and the TCA9406DCTR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PCA9306DCTR?

13 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.