2 layers30.4 × 124.6 mm
Bearamin dpt sensor RevE
actuallysparky/bearamin
Bear-sized optical gesture instrument firmware.
16 partsMIT
4 layers55.4 × 126.1 mm
Bearcv-10hp main dualMCP4728 routed DRC pinremap revc
actuallysparky/bearaminBear-sized optical gesture instrument firmware.
- Size
- 55.4 × 126.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 128
- Nets
- 76
- Pads
- 364
- Tracks, vias
- 1,472, 159
- Pours
- 396
- Routed
- Yes
- KiCad
- KiCad 10.99 (file 20260831)
- Created
- 10 Aug 2026
- Updated
- 22 Oct 2026
Overview
Bearcv-10hp main dualMCP4728 routed DRC pinremap revc is an open-source printed circuit board by actuallysparky, from the actuallysparky/bearamin repository on GitHub, published under the MIT licence. It is a 4-layer board of 55.4 × 126.1 mm with 128 parts on 76 nets, routed with 1,472 tracks and 159 vias.
It is built around the SN74AHCT125PWRE4, CC0603KRX7R9BB104 and AVR-M1608C220KT2AB, with the BAT54S-7-F-79, RT0603BRD0710KL and RT0603BRE0714K3L among its other parts. Its parts include 4 ICs, 2 diodes and 2 fuses. It belongs with the ESP32 boards of this library.
Main components
12
SN74AHCT125PWRE4
TSSOP-14-40℃~+85℃ 1 20uA 4 4.5V~5.5V 74AHCT 8.5ns@5V,50pF 8mA 8mA Tri-State Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
CC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
AVR-M1608C220KT2AB
060310A 16V 210pF 22V 30mJ 37V 0603 Varistors ROHSTDKVaristorsBAT54S-7-F-79
SMDSMD Pre-ordered transistors ROHSDiodes IncorporatedPre-Ordered TransistorsRT0603BRD0710KL
0603-55℃~+155℃ 100mW 10kΩ 75V Thin Film Resistor ±0.1% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0603BRE0714K3L
0603-55℃~+155℃ 100mW 14.3kΩ 75V Thin Film Resistor ±0.1% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0603BRD072K21L
0603-55℃~+155℃ 100mW 2.21kΩ 75V Thin Film Resistor ±0.1% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount
CL21A226MAQNNNE
080522uF 25V X5R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
PTV09A-4020F-B103
插件-3P插件-3P Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable Resistors
SS14L
SOD-123FL1 Independent 1A 30A 40V 500uA@40V 550mV@1A SOD-123FL Schottky Diodes ROHSGuangdong HottechSchottky DiodesCL21A106KAYNNNE
080510uF 25V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
1206L050/24WR
1206-40℃~+85℃ 100A 100ms 150mΩ 1A 24V 500mA 750mΩ 8W 1206 Resettable Fuses ROHSLittelfuseResettable Fuses
README
bearamin/hw/Sensor-expander/README.mdBearamin Sensor Expander
The canonical publication hardware is the v6 sidecar board:
bearamin-dpt-sensor-v6.kicad_probearamin-dpt-sensor-v6.kicad_pcb
The PCB contains the XIAO ESP32-S3 Wi-Fi sidecar, ESP32-S3 MatrixCore, VL53L7CX 8x8 sensor connection, DPT link, and power components. It has no retired single-point sensor footprint or connection.
The current board is routed and KiCad reports no unconnected pads. Its current DRC report contains 14 warnings for local footprint overrides and silkscreen size/overlap, so review and resolve those items before fabrication.
The v6 release is board-authoritative and does not attach the older v5 schematic. The v5 board, its schematic, earlier revisions, autorouter intermediates, and generated fabrication exports remain local design history and are not part of the publication bundle.
Parts
128| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n X7R | C_DAC_BIP_100N, C_DAC_UNI_100N, C_GATE_LDAC, C_I2C_3V3, C_I2C_5V, C_OP_BIP_N, C_OP_BIP_P, C_OP_UNI_N, C_OP_UNI_P | |
| 8 | 1M boot pulldown | R_PD_PRES, R_PD_SPANK, R_PD_X_BI, R_PD_X_UNI, R_PD_Y_BI, R_PD_Y_UNI, R_PD_Z_BI, R_PD_Z_UNI | |
| 8 | 1k output isolation | R_PRES, R_SPANK, R_X_BI, R_X_UNI, R_Y_BI, R_Y_UNI, R_Z_BI, R_Z_UNI | |
| 8 | AVR-M1608C220KT2AB 16V ESD | D_PRES, D_SPANK, D_X_BI, D_X_UNI, D_Y_BI, D_Y_UNI, D_Z_BI, D_Z_UNI | |
| 8 | BAT54S dual-series rail clamp | DCL_PRES, DCL_SPANK, DCL_X_BI, DCL_X_UNI, DCL_Y_BI, DCL_Y_UNI, DCL_Z_BI, DCL_Z_UNI | |
| 8 | Thonkiconn PJ398SM / PJ301M-12 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J_PRES, J_SPANK, J_X_BI, J_X_UNI, J_Y_BI, J_Y_UNI, J_Z_BI, J_Z_UNI |
| 6 | 10k 0.1% | R_BIP_X_BIAS, R_BIP_Y_BIAS, R_BIP_Z_BIAS, R_UNI_X_GND, R_UNI_Y_GND, R_UNI_Z_GND | |
| 6 | 1k | R_DAC_BIP_BIAS_SER, R_DAC_BIP_X_SER, R_DAC_BIP_Y_SER, R_DAC_BIP_Z_SER, R_RANGE, R_SLEW | |
| 4 | 100k | R_GATE_PRES_PD, R_GATE_SPANK_PD, R_LDAC_BIP_PU, R_LDAC_UNI_PU | |
| 4 | 1u | C_9VIN, C_9VOUT, C_N9VIN, C_N9VOUT | |
| 4 | 4.7k | R_I2C_SCL_3V3, R_I2C_SCL_5V, R_I2C_SDA_3V3, R_I2C_SDA_5V | |
| 3 | 14.3k 0.1% | R_BIP_X_FB, R_BIP_Y_FB, R_BIP_Z_FB | |
| 3 | 2.21k 0.1% | R_UNI_X_FB, R_UNI_Y_FB, R_UNI_Z_FB | |
| 2 | 100n | C_RANGE, C_SLEW | |
| 2 | 100nF 50V X7R | C_BUCK_BST, C_BUCK_VIN_HF | |
| 2 | 10u 10V X5R | C_DAC_BIP_10U, C_DAC_UNI_10U | |
| 2 | 22uF 25V X5R | C_BUCK_OUT1, C_BUCK_OUT2 | |
| 2 | Bourns PTV09A-4020F-B103 | BearCV_Potentiometer:Potentiometer_Bourns_PTV09A-4F_L20mm_Horizontal_Rear | RV_RANGE, RV_SLEW |
| 2 | SS14L 40V 1A Schottky | D1, D2 | |
| 1 | +12 | TP_12P | |
| 1 | +8 | TP_8P | |
| 1 | -12 | TP_12N | |
| 1 | -8 | TP_8N | |
| 1 | 100p C0G | C_I2C_BIAS | |
| 1 | 10u 16V X5R | C_BUCK | |
| 1 | 10uF 25V X5R | C_BUCK_IN | |
| 1 | 1206L050/24WR 24V 500mA PTC | F1 | |
| 1 | 200k | R_I2C_EN | |
| 1 | 3V3 | TP_3V3 | |
| 1 | 4.7uH 2.3A | L_BUCK | |
| 1 | 5A | TP_5A | |
| 1 | 5B | TP_5B | |
| 1 | AP63205WU-7 5V 2A | U_BUCK | |
| 1 | BIAS | TP_BIAS | |
| 1 | BRAW | TP_BRAW | |
| 1 | Eurorack 2x5 shrouded rear | IDC-Header_2x05_P2.54mm_Vertical | J_PWR |
| 1 | GND | TP_GND1 | |
| 1 | L78L08ACUTR +8V 100mA | U4 | |
| 1 | L79L08ACD13TR -8V 100mA | U5 | |
| 1 | LDB | TP_LDB | |
| 1 | LDU | TP_LDU | |
| 1 | MCP4728T-E/UN bipolar DAC | U_DAC_BIP | |
| 1 | MCP4728T-E/UN unipolar DAC | U_DAC_UNI | |
| 1 | OPA4171AIPWR bipolar scaling | U_OP_BIP | |
| 1 | OPA4171AIPWR unipolar scaling | U_OP_UNI | |
| 1 | PCA9306DCTR I2C translator | U_I2C_XLAT | |
| 1 | SCL3 | TP_SCL3 | |
| 1 | SCL5 | TP_SCL5 | |
| 1 | SDA3 | TP_SDA3 | |
| 1 | SDA5 | TP_SDA5 | |
| 1 | SMD1206B020TF/24 24V 200mA PTC | F2 | |
| 1 | SN74AHCT125PWR gate and LDAC level buffer | U_GATE_LDAC | |
| 1 | URAW | TP_URAW | |
| 1 | VL53L7CX 8x8 breakout placeholder - VERIFY | U2 | |
| 1 | Waveshare ESP32-S3-Matrix | U1 | |
| 1 | ferrite 600R@100MHz | FB1 |
More from actuallysparky/bearamin
3- 2 layers30.5 × 128.5 mm
Bearamin dpt sensor v6
actuallysparky/bearamin
Bear-sized optical gesture instrument firmware.
11 partsMIT - 2 layers31.5 × 35 mm
Bearamin Virtual 2040
actuallysparky/bearamin
Bear-sized optical gesture instrument firmware.
5 partsMIT
Similar boards
- 4 layers180 × 110 mm
PETER
dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.
419 parts4LGPL-2.1 - 4 layers60 × 40 mm
- 4 layers50 × 71 mm
Pluto rx2 8way
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
68 parts3MIT - 4 layers78.2 × 203.2 mm
- 4 layers180.5 × 108 mm
Radian panel.before colored actual models 20260918T190457
KrasForge/Courant
A 2D finite-difference physical-modeling synthesis engine in structural VHDL: a vibrating membrane/plate/gong solved on FPGA fabric, with a nonlinear chaos term, playable polyphonically over MIDI/CV.
69 partsMIT - 4 layers316 × 116 mm
Osc control layout
Takazudo/zudo-osc-hole-field
This directory retains the rejected #38 nine-board-era schematic, PCB and route receipts at base commit 1fc6e5347308fe5e8166d5828ba3ba6fa8e101c7. It is excluded from the current ten-board manifest.
454 parts - 4 layers180 × 100 mm
Class board V0.2
TIGP-Experimental-Methods/class-board-2026
TIGP class instrument 2026: one board, five blocks - KiCad hardware, ESP32-S3 firmware, phone PWA, Python API, workbook
342 parts - 2 layers75.7 × 37.4 mm
Spectrometer
atx/spectrometer
Alpha spectrometer developed during my internship at the Institute at the Experimental and Applied Physics
270 parts2MIT
Questions
How big is the Bearcv-10hp main dualMCP4728 routed DRC pinremap revc PCB?
It measures 55.4 × 126.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Bearcv-10hp main dualMCP4728 routed DRC pinremap revc use?
128 parts, built around the SN74AHCT125PWRE4, CC0603KRX7R9BB104, AVR-M1608C220KT2AB and BAT54S-7-F-79. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bearcv-10hp main dualMCP4728 routed DRC pinremap revc KiCad files?
From the actuallysparky/bearamin repository on GitHub, at the commit this page was made from: the board is bearamin-lite/hw/bearcv-10hp/bearcv-10hp-main_dualMCP4728_routed_DRC_pinremap_revc.kicad_pcb and its schematic bearamin-lite/hw/bearcv-10hp/bearcv-10hp-main_dualMCP4728_routed_DRC_pinremap_revc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bearcv-10hp main dualMCP4728 routed DRC pinremap revc design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).