

Cm5-m2key b usb3-ix
modular RPI CM5 carrier board
- Size
- 106 × 62 mm
- Copper layers
- 8
- Thickness
- 1.62 mm
- Parts
- 224
- Nets
- 310
- Pads
- 1,086
- Tracks, vias
- 1,884, 1,226
- Pours
- 84
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 May 2025
- Updated
- 2 Jun 2025
Overview
Cm5-m2key b usb3-ix is an open-source printed circuit board by taskx6004, from the taskx6004/AnyRadio-CM5 repository on GitHub. It is an 8-layer board of 106 × 62 mm with 224 parts on 310 nets, routed with 1,884 tracks and 1,226 vias.
It is built around the SN74LVC1G07YZVR, SN74LVC1G06YZVR and TPSM828301ARDSR, with the TPD1E05U06DPY, TPSM82866AA0SRDJR and TPS22902BYFPR among its other parts. Its parts include 74 resistors, 46 capacitors, 21 ICs, 20 diodes and 12 connectors. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.
Main components
12SN74LVC1G07YZVR
DSBGA-4(0.9x0.9)-40℃~+85℃ 1 1 1.5ns@3.3V,50pF 1.65V~5.5V 10uA 32mA 74LVC Open-drain Power-off isolation、Level shifting Unidirectional DSBGA-4(0.9x0.9) Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC1G06YZVR
DSBGA-4(0.9x0.9)-40℃~+125℃ 1 1 1.07V~3.85V 1.65V~5.5V 10uA 3.5ns@5V,50pF 32mA 580mV~1.65V 74LVC Schmitt trigger DSBGA-4(0.9x0.9) Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsInvertersTPSM828301ARDSR
QFN-FCMOD-9(3x3)DC-DC Power ModulesTexas InstrumentsTPD1E05U06DPY
DFN21 Channel ESD Protection Device for Super-Speed (up to 6 Gbps) InterfaceTexas InstrumentsUncategorisedTPSM82866AA0SRDJR
B0QFN-23(3.5x4)-40℃~+125℃ 1 2.4MHz 2.4V~5.5V 4uA 600mV~5.5V 6A Buck Built-in Step-down type Yes B0QFN-23(3.5x4) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS22902BYFPR
DSBGA-4(0.8x0.8)-40℃~+85℃ 1 1V~3.6V 500mA 78mΩ Active High Load Switch DSBGA-4(0.8x0.8) Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesHD3SS3220RNHR
WQFN-30-EP(2.5x4.5)0℃~+70℃ 4.5V~5.5V 5uA I2C Not supported Not supported WQFN-30-EP(2.5x4.5) Analog Switches, Multiplexers ROHSTexas InstrumentsBattery ManagementMAX77972EWX+T
-- Lack of specifications ROHSAnalog DevicesUncategorisedTS5USBC400YFPR
DSBGA-120℃~+70℃ 1.1GHz 130ps 1us 2 2.3V~5.5V 250us 2:1 4.5pF 6Ω USB DSBGA-12 Analog Switches - Special Purpose ROHSTexas InstrumentsAnalog Switches - Special PurposeTPD1E01B04DPLR
X2-SON-2(0.3x0.6)-40℃~+125℃ 0.18pF 1 10nA 15V 2.5A@8/20us 27W@8/20us 3.6V 6.4V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 X2-SON-2(0.3x0.6) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)FH34SRJ-22S-0.5SH(50)
SMD,P=0.5mm,卧贴-55℃~+105℃ 0.3mm 0.5mm 1mm 22P Double-Sided Contacts, Top and Bottom Entry Gold Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector Assemblies6TPS150MUD
1411-55℃~+105℃ 150uF 30mΩ@100kHz 6.3V ±20% 1411 Tantalum Capacitors ROHSPanasonicTantalum Capacitors
README
README.mdAnyRadio-CM5
modular RPI CM5 carrier board
Parts
224| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | TestPoint | _Library:PAD_D1 | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +18 |
| 24 | 10k | _Library:R_0201 | R14, R22, R23, R28, R29, R30, R33, R34, R37, R39, R41, R43, R44, R45, R48, R53 +8 |
| 20 | TPD1E01B04DPLR | _Library:TPD1E01B04DPLR | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 11 | 100nF | _Library:C_0201 | C3, C6, C10, C11, C12, C22, C24, C42, C43, C45, C46 |
| 7 | 47uF | _Library:C_0805 | C16, C19, C21, C23, C28, C30, C31 |
| 6 | 2.2k | _Library:R_0201 | R13, R15, R16, R17, R20, R21 |
| 6 | 200k | _Library:R_0201 | R32, R38, R40, R46, R50, R74 |
| 5 | 10uF | _Library:C_0805 | C18, C20, C35, C37, C38 |
| 4 | 0R | _Library:R_0201 | R18, R19, R24, R35 |
| 4 | 10m | _Library:PF0603FRE7T0R01Z | R2, R3, R25, R62 |
| 4 | 10nF | _Library:C_0805 | C4, C5, C7, C8 |
| 4 | 18-038BT | _Library:18-038BT | LED-1, LED-2, LED-3, LED-4 |
| 4 | 2.2nF | _Library:C_0201 | C29, C39, C40, C41 |
| 4 | 2.2uF | _Library:C_0402 | C25, C26, C27, C36 |
| 4 | 205k | _Library:R_0201 | R26, R52, R64, R66 |
| 4 | 22uF | _Library:C_0805 | C9, C13, C14, C34 |
| 4 | 33k | _Library:R_0201 | R5, R8, R59, R71 |
| 4 | 75R | _Library:R_0603 | R4, R7, R11, R12 |
| 4 | MountingHole_Pad_MP | _Library:9774020151R | H1, H2, H3, H4 |
| 4 | SN74LVC1G07YZVR | _Library:SN74LVC1G07YZVR | U1, U2, U8, U14 |
| 3 | 1k | _Library:R_0201 | R10, R61, R73 |
| 3 | 3.3k | _Library:R_0201 | R56, R68, R75 |
| 3 | 470k | _Library:R_0201 | R51, R63, R65 |
| 3 | MountingHole_Pad_MP | _Library:9774015151R | H5, H6, H7 |
| 3 | SN74LVC1G06YZVR | _Library:SN74LVC1G07YZVR | U12, U13, U17 |
| 2 | 100k | _Library:R_0201 | R42, R69 |
| 2 | 100pF | _Library:GRM32A7U3D101JW31D | C1, C2 |
| 2 | 2305018 | _Library:2305018 | P1, P2 |
| 2 | 4.7uF | _Library:C_0402 | C15, C17 |
| 2 | FH34SRJ-22S-0.5SH(50) | _Library:FH34SRJ-22S-0.5SH(50) | J3, J4 |
| 2 | LM73100RPWR | _Library:TPS25210ARPWR | U15, U20 |
| 2 | SW_Push | _Library:EVPAW | SW1, SW2 |
| 2 | TPD1E05U06 | _Library:TPD4EUSB30DQAR | U18, U21 |
| 2 | TPS22902BYFPR | _Library:TPS22902BYFPR | U3, U5 |
| 2 | TPSM81033VCDR | _Library:TPSM81033VCDR | U7, U10 |
| 1 | 0R | _Library:R_0603 | R1 |
| 1 | 1.13M | _Library:R_0201 | R31 |
| 1 | 100nF | _Library:C_0402 | C32 |
| 1 | 10uF | _Library:C_0402 | C33 |
| 1 | 120R@100M | _Library:L_0805 | FB1 |
| 1 | 12k | _Library:R_0201 | R27 |
| 1 | 1747981 | _Library:1747981 | J2 |
| 1 | 36.5k | _Library:R_0201 | R70 |
| 1 | 470nH | _Library:IHLP1210BZEZ-5A | L1 |
| 1 | 500k | _Library:R_0201 | R49 |
| 1 | 5033981892 | _Library:SD-503398-003 | J8 |
| 1 | 6.34k | _Library:R_0201 | R47 |
| 1 | 6TPS150MUD | _Library:6TPS150MUD | C44 |
| 1 | 749020112B | _Library:749020112B | T1 |
| 1 | 900k | _Library:R_0201 | R57 |
| 1 | CM5 | _Library:CM5 | XA1 |
| 1 | DF65-3P-1.7V(21) | _Library:DF65-3P-1.7V(21) | J10 |
| 1 | HD3SS3220RNHR | _Library:HD3SS3220RNHR | U16 |
| 1 | IX60G-A-10P | _Library:IX60G-A-10P | J1 |
| 1 | M.2-B_KEY | _Library:2199119-1 | J5 |
| 1 | MAX77972EWX+T | _Library:MAX77972EWX+T | U11 |
| 1 | MHF4L | _Library:MHF4L | J7 |
| 1 | SF72S006VBDR2500 | _Library:SF72S006VBDR2500 | J6 |
| 1 | SM04B-SRSS-TB | _Library:BM04B-SRSS-TB | J9 |
| 1 | TPS25210ARPWR | _Library:TPS25210ARPWR | U19 |
| 1 | TPSM828301ARDSR | _Library:TPSM828301ARDSR | U6 |
| 1 | TPSM82866AA0SRDJR | _Library:TPSM82866AA0SRDJR | U4 |
| 1 | TS5USBC400YFPR | _Library:TS5USBC400YFPR | U9 |
Similar boards
- 6 layers104.8 × 77 mm

- 8 layers89.9 × 92 mm

- 8 layers74 × 128 mm

Limejig
taskx6004/limejig
Open-source LimeJig fixture firmware, host tools, KiCad source, and synthetic test examples
92 parts1MIT - 10 layers197 × 130 mm

- 4 layers16 × 26.5 mm

- 4 layers50 × 50 mm

LFX FC R2
nguyencanhanh/luckfox-rv1103-drone
AI quadcopter on one RV1103 (Luckfox Pico Mini B): Linux + RISC-V MCU flight loop, SITL with 3D pilot view, KiCad flight-controller board
142 partsMIT - 6 layers84 × 50 mm

Solar ribbit
Ribbit-Network/ribbit-network-frog-hardware
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.
171 parts107MIT - 4 layers26.8 × 17.3 mm

Nrfmodule
RedBulletTooling/crypsis-public
This contains, all files from hardware to software production and all to make Crypsis
35 parts6Apache-2.0
Questions
How big is the Cm5-m2key b usb3-ix PCB?
It measures 106 × 62 mm and has 8 copper layers, 1.62 mm thick.
What parts does the Cm5-m2key b usb3-ix use?
224 parts, built around the SN74LVC1G07YZVR, SN74LVC1G06YZVR, TPSM828301ARDSR and TPD1E05U06DPY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cm5-m2key b usb3-ix KiCad files?
From the taskx6004/AnyRadio-CM5 repository on GitHub, at the commit this page was made from: the board is cm5-m2key_b-usb3-ix.kicad_pcb and its schematic cm5-m2key_b-usb3-ix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cm5-m2key b usb3-ix design in my own project?
Its repository states no licence, so its author keeps all rights: ask taskx6004 before reusing the design.