Skip to the content

Boards using the IP4234CZ6

27 boards

Boards in 21 GitHub repositories, designed in KiCad, that use the IP4234CZ6 by Nexperia (-40℃~+85℃@(Ta) 100W 100nA 3.1pF 5.5V 6V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 TSOP-6 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the IP4234CZ6’s symbol, footprint and pinout are on its own page.

  • 4 layers55 × 73.5 mmLibreCAL, the printed circuit board in 3D

    LibreCAL

    jankae/LibreCAL

    4 port eCal module

    132 parts140GPL-3.0
  • 2 layers56 × 70 mmCFS Bus Adapter R2, the printed circuit board in 3D

    CFS Bus Adapter R2

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    66 parts58
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers73.8 × 31.1 mmCh375serial, the printed circuit board in 3D

    Ch375serial

    ChartreuseK/ch375serial

    CH375-Serial Adapter

    37 parts4CERN-OHL-W-2.0
  • 2 layers230 × 70 mmCyCompute, the printed circuit board in 3D

    CyCompute

    M2I-HABET/CyStack

    This is the electronics stack and associated software for a module payload stack

    29 parts3
  • 2 layers299.2 × 112.1 mmTS65, the printed circuit board in 3D

    TS65

    mohitg11/TS65ARM

    The Split 65% Keyboard - ARM Based

    438 parts3
  • 2 layers50 × 50 mmUsbsupply, the printed circuit board in 3D

    Usbsupply

    brightcloudy/usbsupply

    USB-powered variable voltage and current power supply.

    78 parts
  • 4 layers57.4 × 67.3 mmUWBkit sniffer, the printed circuit board in 3D

    UWBkit sniffer

    GraniteGobbler/UWBkit

    This is a repository containing firmware from two other repositories and is released under their license: - DWM3001C-starter-firmware, by Uberi (as of 02c341b) - SSD1306-LCD-on-NRF52, by jimmywong2003 (as of 4ca746a)

    78 parts
  • 4 layers80 × 52.7 mmVFDClock, the printed circuit board in 3D

    VFDClock

    GraniteGobbler/VFDClock

    ESP32-S3 -based IV-22 desk clock

    84 parts
  • 4 layers25 × 40 mmMiniParMain, the printed circuit board in 3D

    MiniParMain

    Jan-IngenHousz-Institute/miniPar

    Repository firmware for the ambit PAR meter version

    36 partsMIT
  • 2 layers73.2 × 116 mmSAMPad, the printed circuit board in 3D

    SAMPad

    jaredhumphreys3141/MECHANICAL-NUMPAD-PCB

    This is a custom numeric pad that is designed to be usable on the right side of the keyboard or on the left (With a mirrored layout if required). There is a gap in the top row and the second row of 1.25U.

    154 parts
  • 4 layers115.5 × 90 mmKiKit Output, the printed circuit board in 3D

    KiKit Output

    k4i70/Flight-Controller

    Custom Betaflight Quadcopter PCB built in KiCad

    536 parts
  • 4 layers38.5 × 17 mmBC832A, the printed circuit board in 3D

    BC832A

    tomfleet/BC832A

    32 parts
  • 4 layers35 × 25 mmBC832A, the printed circuit board in 3D

    BC832A

    tomfleet/immutable

    another BLE IMU...

    48 parts
  • 4 layers74.3 × 115.1 mmBare metal, the printed circuit board in 3D

    Bare metal

    wenzellabs/bare_metal

    bare_metal FPGA open source development board

    261 parts
  • 2 layers319.5 × 146.3 mmAqp moda HC, the printed circuit board in 3D

    Aqp moda HC

    fvdhoef/aquarius-plus

    Official Aquarius+ repository

    207 parts62MIT
  • 4 layers141 × 89.5 mmAqp moda Main, the printed circuit board in 3D

    Aqp moda Main

    fvdhoef/aquarius-plus

    Official Aquarius+ repository

    107 parts62MIT
  • 2 layers128 × 83 mmAquarius plus, the printed circuit board in 3D

    Aquarius plus

    fvdhoef/aquarius-plus

    Official Aquarius+ repository

    115 parts62MIT
  • 2 layers167 × 115 mmAquarius plus, the printed circuit board in 3D

    Aquarius plus

    fvdhoef/aquarius-plus

    Official Aquarius+ repository

    182 parts62MIT
  • 2 layers40 × 60 mmCFS Bus Adapter R1, the printed circuit board in 3D

    CFS Bus Adapter R1

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    46 parts58
  • 2 layers88.9 × 76.2 mmCnc hmi usb power, the printed circuit board in 3D

    Cnc hmi usb power

    tangentaudio/pico-cnc-hmi

    Raspberry Pi Pico HMI for LinuxCNC using USB Raw HID

    95 parts3
  • 2 layers26.4 × 41.7 mmDevboard, the printed circuit board in 3D

    Devboard

    Soraxem/trance

    Open Lighting hardware

    18 parts1CERN-OHL-P-2.0
  • 2 layers49 × 39.1 mmUWBkit minimal, the printed circuit board in 3D

    UWBkit minimal

    GraniteGobbler/UWBkit

    This is a repository containing firmware from two other repositories and is released under their license: - DWM3001C-starter-firmware, by Uberi (as of 02c341b) - SSD1306-LCD-on-NRF52, by jimmywong2003 (as of 4ca746a)

    57 parts
  • 4 layers34 × 19.3 mmFT230X Serial Board, the printed circuit board in 3D

    FT230X Serial Board

    hampussandberg/esp-boards

    Various ESP8266 and ESP32 boards

    31 parts