Skip to the content
4 layers57.4 × 67.3 mmUWBkit sniffer, the printed circuit board in 3D

UWBkit sniffer

GraniteGobbler/UWBkit

This is a repository containing firmware from two other repositories and is released under their license: - DWM3001C-starter-firmware, by Uberi (as of 02c341b) - SSD1306-LCD-on-NRF52, by jimmywong2003 (as of 4ca746a)

Size
57.4 × 67.3 mm
Copper layers
4
Thickness
1.61 mm
Parts
78
Nets
102
Pads
387
Tracks, vias
564, 702
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Sep 2025
Updated
24 May 2026

Overview

UWBkit sniffer is an open-source printed circuit board by GraniteGobbler, from the GraniteGobbler/UWBkit repository on GitHub. It is a 4-layer board of 57.4 × 67.3 mm with 78 parts on 102 nets, routed with 564 tracks and 702 vias.

It is built around the CP2104EK, LBUA5QJ2AB-828 and IP4234CZ6. Its parts include 22 resistors, 12 capacitors, 11 connectors, 6 diodes and 5 ICs.

Main components

3

README

README.md

UWBkit

This is a repository containing firmware from two other repositories and is released under their license:

All other files are released under the Creative Commons CC0 license.

Parts

78
QtyValueFootprintReferences
12TestPoint_SmallTestPoint:TestPoint_Pad_D1.0mmT1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12
60RResistor_SMD:R_0603_1608MetricR1, R2, R7, R8, R9, R13
6100nCapacitor_SMD:C_0603_1608MetricC1, C3, C6, C9, C11, C12
43k3Resistor_SMD:R_0603_1608MetricR4, R5, R10, R15
45k1Resistor_SMD:R_0603_1608MetricR17, R18, R20, R21
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
4RLED_SMD:LED_0603_1608MetricD1, D2, D4, D5
2100kResistor_SMD:R_0603_1608MetricR3, R11
210kResistor_SMD:R_0603_1608MetricR19, R22
210uCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC2, C4
210uCapacitor_SMD:C_0603_1608MetricC7, C8
22k1Resistor_SMD:R_0603_1608MetricR6, R16
2GLED_SMD:LED_0603_1608MetricD3, D6
2IP4234CZ6Package_TO_SOT_SMD:SC-74-6_1.55x2.9mm_P0.95mmU4, U5
2LInductor_SMD:L_0603_1608MetricL1, L2
2USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ10, J11
10RCapacitor_SMD:C_0603_1608MetricC5
11uCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC10
12.2uInductor_SMD:L_0805_2012MetricL3
124kResistor_SMD:R_0603_1608MetricR12
147kResistor_SMD:R_0603_1608MetricR14
1CP2104Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU3
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ9
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ3
1Conn_CoaxialConnector_Coaxial:SMA_Molex_73251-1153_EdgeMount_HorizontalJ8
1Conn_GPIOConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ7
1Conn_I2C1Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1Conn_I2C2Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1Conn_SPIMConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ5
1Conn_SPISConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ4
1Conn_SWDConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ6
1LBUA5QJ2ABLBUA5QJ2AB:LBUA5QJ2ABU1
1SW_PushButton_Switch_THT:SW_TH_Tactile_Omron_B3F-106xSW1
1Taoglas_UWC.20UWB_Antennas:Taoglas_UWC.20ANT1
1XC9285B33CMR-GPackage_TO_SOT_SMD:SOT-23-5U2
1https://github.com/GraniteGobbler/UWBkitUWBkit:Git-Repo-QRQR*****

More from GraniteGobbler/UWBkit

1
  • 2 layers49 × 39.1 mmUWBkit minimal, the printed circuit board in 3D

    UWBkit minimal

    GraniteGobbler/UWBkit

    This is a repository containing firmware from two other repositories and is released under their license: - DWM3001C-starter-firmware, by Uberi (as of 02c341b) - SSD1306-LCD-on-NRF52, by jimmywong2003 (as of 4ca746a)

    57 parts

Similar boards

  • 4 layers12.2 × 50.4 mmCompass v1, the printed circuit board in 3D

    Compass v1

    mszkowalik/7S_Compass_v1_board

    BLE Long range + mesh? https://github.com/jnsbyr/nrf52-ble-test

    146 parts
  • 4 layers55 × 73.5 mmLibreCAL, the printed circuit board in 3D

    LibreCAL

    jankae/LibreCAL

    4 port eCal module

    132 parts140GPL-3.0
  • 2 layers56 × 70 mmCFS Bus Adapter R2, the printed circuit board in 3D

    CFS Bus Adapter R2

    fake-name/cfs-reverse-engineering

    Reverse engineering the Creality CFS for use as a general AMU/MMU system

    66 parts58
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers73.8 × 31.1 mmCh375serial, the printed circuit board in 3D

    Ch375serial

    ChartreuseK/ch375serial

    CH375-Serial Adapter

    37 parts4CERN-OHL-W-2.0
  • 2 layers230 × 70 mmCyCompute, the printed circuit board in 3D

    CyCompute

    M2I-HABET/CyStack

    This is the electronics stack and associated software for a module payload stack

    29 parts3
  • 2 layers299.2 × 112.1 mmTS65, the printed circuit board in 3D

    TS65

    mohitg11/TS65ARM

    The Split 65% Keyboard - ARM Based

    438 parts3
  • 2 layers50 × 50 mmUsbsupply, the printed circuit board in 3D

    Usbsupply

    brightcloudy/usbsupply

    USB-powered variable voltage and current power supply.

    78 parts

Questions

How big is the UWBkit sniffer PCB?

It measures 57.4 × 67.3 mm and has 4 copper layers, 1.61 mm thick.

What parts does the UWBkit sniffer use?

78 parts, built around the CP2104EK, LBUA5QJ2AB-828 and IP4234CZ6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UWBkit sniffer KiCad files?

From the GraniteGobbler/UWBkit repository on GitHub, at the commit this page was made from: the board is KiCad/UWBkit_sniffer/UWBkit_sniffer.kicad_pcb and its schematic KiCad/UWBkit_minimal/UWBkit_minimal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UWBkit sniffer design in my own project?

Its repository states no licence, so its author keeps all rights: ask GraniteGobbler before reusing the design.