Skip to the content

Boards using the BC817-40

75 boards

Boards in 61 GitHub repositories, designed in KiCad, that use the BC817-40 by Nexperia (-65℃~+150℃ 1 NPN 100MHz 100nA 250 345mW 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHS). See how each wires it, with its parts, size, README and files; the BC817-40’s symbol, footprint and pinout are on its own page.

  • 2 layersMP Tracker, the printed circuit board in 3D

    MP Tracker

    elektra42/freifunk-open-mppt

    Open hard- and software solar maximum power point tracker

    70 parts89
  • 2 layers44.2 × 32.6 mmWiring, the printed circuit board in 3D

    Wiring

    esp-ebus/ebus-adapter-hardware

    This repo conains KiCAD design of eBUS bus powered (without external supply) adapter to WiFi.

    49 parts44
  • 11 layers74.2 × 29.2 mmSolderingStationPCB, the printed circuit board in 3D

    SolderingStationPCB

    clytle374/Open-T12-Soldering-Station

    This is a clone of the cheap T12 soldering stations, attempting to eliminate the shortfalls of the cheap designs.

    68 parts43GPL-3.0
  • 6 layers69.6 × 46.1 mmCarrier, the printed circuit board in 3D

    Carrier

    KaiPereira/CM5-SODIMM-Carrier

    A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!

    98 parts29
  • 4 layersIONPAK2, the printed circuit board in 3D

    IONPAK2

    m-labs/ionpak

    A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)

    259 parts23
  • 2 layers24 × 24 mmBlue - 1.2mm, the printed circuit board in 3D

    Blue - 1.2mm

    flummer/pcb-color-samples

    Small PCB color samples to be used when designing printed circuit boards

    25 parts21CC-BY-SA-4.0
  • 2 layers96.3 × 93.6 mmESP OpenMppt, the printed circuit board in 3D

    ESP OpenMppt

    ISEMS/ISEMS-ESP32

    ISEMS-Port for Solarnodes based on ESP32 Microcontrollers

    75 parts11
  • 2 layers56.5 × 53.3 mmCompressorController, the printed circuit board in 3D

    CompressorController

    ieb/fridgeController

    Secop or Danfoss 12v fridge compressor controller

    21 parts10
  • 2 layers87 × 30.8 mmEbus2usb, the printed circuit board in 3D

    Ebus2usb

    jkyprian/ebus2usb

    1TE DIN Rail eBus to USB Type-C Adapter

    59 parts10
  • 2 layersVhf uhf IQ Modulator, the printed circuit board in 3D

    Vhf uhf IQ Modulator

    antonjan/IQ_Modulator

    IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)

    88 parts7GPL-3.0
  • 2 layers91.4 × 40.6 mmMhixy, the printed circuit board in 3D

    Mhixy

    iblue/mhi-xy-bus

    Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition

    70 parts6
  • 2 layers66 × 56.5 mmRaspberry Pi 2m TX, the printed circuit board in 3D

    Raspberry Pi 2m TX

    antonjan/Bacar_Raspberry_tx

    This project is to share the Bacar Raspberry Transmitter 2m Transmitter

    32 parts4
  • 2 layers52 × 21 mmPioneerBMWInterface, the printed circuit board in 3D

    PioneerBMWInterface

    pchmura4/BMW-Pioneer_interface

    Interface between BMW E46 steering wheel to control Pioneer aftermarket headunits

    34 parts2AGPL-3.0
  • 2 layersSmd pen, the printed circuit board in 3D

    Smd pen

    tdarlic/smd_pen

    Pick and Place Pen

    65 parts2
  • 4 layers55 × 55 mmThetaAnomalain, the printed circuit board in 3D

    ThetaAnomalain

    Barsy-Barsevich/Barsotion-TA

    Board computer for model rockets

    110 parts1GPL-3.0
  • 4 layers60 × 90 mmESP32-P4-PC Rev B, the printed circuit board in 3D

    ESP32-P4-PC Rev B

    bgates747/agon-extender

    Agon Extender adds an ESP32-P4 coprocessor to an Agon computer. Extended Display Processor (EDP) runs on P4; Extender MOS (EMOS) replaces MOS on the eZ80 and owns display routing, keyboard admission and Extender…

    344 parts1GPL-3.0
  • 2 layers93 × 87 mmGLCD, the printed circuit board in 3D

    GLCD

    gralco/GLCD

    Improved 128x64 GLCD Full Graphic Smart Controller with ESD Protection

    28 parts1
  • 2 layers14 × 80 mmJoule Candle, the printed circuit board in 3D

    Joule Candle

    sdp8483/Joule_Candle

    Joule Thief Holiday Candle PCB

    7 parts1
  • 4 layers75.1 × 60 mmESP32-RS485-Lipo Battery, the printed circuit board in 3D

    ESP32-RS485-Lipo Battery

    SushantSaroch13/ESP32-RS485-Lipo_Battery

    A compact ESP32-C3 based embedded controller board designed for IoT and industrial communication applications. The board integrates USB connectivity, external flash memory, RS-485 communication, and Li-Ion battery…

    78 parts1
  • 4 layers23 × 37.5 mmPem tiny car pcb, the printed circuit board in 3D

    Pem tiny car pcb

    AmeyDEWan/semester-project-PEM-tiny-car

    This repository contains the design files and documentation for the PEM2 SoSe25 model car project.

    99 parts
  • 2 layers150 × 80 mmRpi extension, the printed circuit board in 3D

    Rpi extension

    andriy-bilynskyy/rpi-extension

    This project is a PCB design to create SDR transceiver using Raspberry Pi and Radioberry boards. Simple connection of boards seems incomplete:

    97 partsMIT
  • 2 layers70 × 25 mmArmy simple fc, the printed circuit board in 3D

    Army simple fc

    baden/army-simple-fc

    Army platform simplest Fligth controller

    73 parts
  • 2 layers38 × 100 mmNylok Heater, the printed circuit board in 3D

    Nylok Heater

    boydportfolio/Nylok-Heater

    Two-mode handheld induction-heater controller with KiCad design files, product design rendering, engineering calculations, and full cost analysis.

    68 parts
  • 4 layers173.2 × 52.5 mmCanSat, the printed circuit board in 3D

    CanSat

    budabalint/T.E.E.M.O

    442 parts