2 layers50.8 × 107.9 mm
Boards using the MCP6022-I/P
49 boardsBoards in 37 GitHub repositories, designed in KiCad, that use the MCP6022-I/P by Microchip Technology (-40℃~+125℃ 10MHz 1mA 1pA 1pA 2 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS). See how each wires it, with its parts, size, README and files; the MCP6022-I/P’s symbol, footprint and pinout are on its own page.
- 2 layers20.3 × 110 mm
4HPico
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
73 parts84 - 2 layers377.2 × 318 mm
Three phase bridge
arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
105 parts6 - 2 layers58.4 × 36.8 mm
Bf-018a
botanicfields/KiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
22 parts5CC0-1.0 - 4 layers70 × 60 mm
Tanklevel
Th3Link/tanklevel
This project provides a solution for measuring the liquid level in tanks, such as rainwater tanks, using the TL-136 pressure sensor.
80 parts4CERN-OHL-S-2.0 - 2 layers113 × 86.7 mm
SiC based Battery Disconnect
abhinav937/SiC-Based-Bi-Directional-Circuit-breaker
KiCad 7 PCB design files for E_Fuse
138 parts2 - 2 layers43.8 × 58 mm
Pi hat
fodorbalint/OneWayLabyrinth
Program aiming to solve the one-way labyrinth generation riddle.
53 parts1 - 4 layers35 × 35 mm
- 2 layers60.5 × 85.5 mm
Line Sensor Board
re3Dev/Extrusion-Metrology
PCB with a main purpose of a low-cost, dedicated 1D metrology sensor specifically for a Klipper printer, use controlled illumination to get a high-resolution bead cross-section without running full machine vision, and…
31 parts1 - 2 layers80 × 55 mm
RPI Pico Oscilloscope
Alexou1209/RPI-Pico-oscilloscope-and-logic-analyzer
A pocket sized Oscilloscope and logic Analyzer made using a Raspberry Pi Pico 2 (RP2350) and sigrok-pico firmware
42 parts - 4 layers60 × 50 mm
Smart helmet with anc
baba2712/smart-helmet-with-anc
An industrial safety helmet with hybrid active noise cancellation (feed-forward + adaptive feedback FxLMS) on an STM32H743.
154 partsMIT - 2 layers65 × 40 mm
Binaural Microphone
CubeEarthWorld/Open-Binaural-Microphone
Open-source design data for the Xignal Bicarus1 binaural microphone
46 parts - 4 layers100 × 50 mm
- 2 layers57 × 29 mm
- 2 layers103.4 × 50.6 mm
- 6 layers155 × 100 mm
- 2 layers42 × 35 mm
- 2 layers50 × 42 mm
Elektor
joseluu/Elektor_sdr_teensy
Sdr hardware front end shield to be used on top of the teensy audio board
63 parts - 2 layers59.1 × 14 mm
VacuumSensor
JulienDevillers/vacuumSensorPCB
PCB for vacuum sensor for DIY pick and place machines
12 partsMIT - 2 layers165 × 135 mm
- 2 layers78 × 84 mm
- 2 layers107 × 60 mm
- 4 layers95 × 95 mm
APEX v0
NANDHA0804/Apex-Diagnostic-Tool-V1
Hardware design and manufacturing files for Project Apex V1.0: a multi-functional diagnostic tool. Features a custom 4-layer PCB architecture driven by an ESP32 master and ATmega328P co-processor for high-performance…
146 parts - 2 layers29.2 × 14 mm
