4 layers160 × 118 mm
2 layers59.1 × 14 mm
VacuumSensor
JulienDevillers/vacuumSensorPCBPCB for vacuum sensor for DIY pick and place machines
- Size
- 59.1 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 35
- Tracks, vias
- 37, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Oct 2020
- Updated
- 6 Oct 2020
Overview
VacuumSensor is an open-source printed circuit board by JulienDevillers, from the JulienDevillers/vacuumSensorPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 59.1 × 14 mm with 12 parts on 10 nets, routed with 37 tracks and 19 vias.
It is built around the MCP6022-I/P and MPXA6115A6U. Its parts include 6 resistors, 2 ICs, 1 capacitor and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
2README
README.mdvacuumSensorPCB
PCB for vacuum sensor for DIY pick and place machines
It is based on this design: https://makr.zone/vacuum-sensor/192/
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | MCP6022 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MPXA6115A | MyLib:SOP8-15mm | U1 |
Questions
How big is the VacuumSensor PCB?
It measures 59.1 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VacuumSensor use?
12 parts, built around the MCP6022-I/P and MPXA6115A6U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VacuumSensor KiCad files?
From the JulienDevillers/vacuumSensorPCB repository on GitHub, at the commit this page was made from: the board is pcb/vacuumSensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VacuumSensor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers191.9 × 68.4 mm
Control ROV
tdominguezmasciale/Control_ROV
A Flask-based control system for a Raspberry Pi 4 ROV, featuring real-time video streaming, PID depth stabilization, and a web-based telemetry dashboard.
35 partsGPL-3.0 - 2 layers83.8 × 81.3 mm
Pressure sensor
IsuriWeerarathne/Smart-BioGas-System
This Project is about a microcontroller-based hardware project on automated biogas system which done as a group project.
7 parts1 - 2 layers50.8 × 107.9 mm
- 2 layers20.3 × 110 mm
4HPico
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
73 parts84 - 2 layers377.2 × 318 mm
Three phase bridge
arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
105 parts6 - 2 layers58.4 × 36.8 mm
Bf-018a
botanicfields/KiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
22 parts5CC0-1.0 - 4 layers70 × 60 mm
Tanklevel
Th3Link/tanklevel
This project provides a solution for measuring the liquid level in tanks, such as rainwater tanks, using the TL-136 pressure sensor.
80 parts4CERN-OHL-S-2.0