Skip to the content

Boards using the ATTINY13A-SU

26 boards

Boards in 26 GitHub repositories, designed in KiCad, that use the ATTINY13A-SU by Microchip Technology (-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATTINY13A-SU’s symbol, footprint and pinout are on its own page.

  • 2 layers110 × 99.6 mmPCIce, the printed circuit board in 3D

    PCIce

    ZoidTechnology/PCIce

    A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.

    22 parts90GPL-3.0
  • 2 layers180.1 × 180.3 mmLibreRouter MegaBoard, the printed circuit board in 3D

    LibreRouter MegaBoard

    LibreRouterOrg/board

    LibreRouter hardware repository

    237 parts55AGPL-3.0
  • 2 layers100.6 × 74.9 mmNes discrete mapper 1-1, the printed circuit board in 3D

    Nes discrete mapper 1-1

    MouseBiteLabs/NES-Cartridges

    A collection of Nintendo Entertainment System (NES) cartridge circuit boards

    55 parts25CC-BY-SA-4.0
  • 2 layers51 × 43 mmEgg timer, the printed circuit board in 3D

    Egg timer

    MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board

    A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.

    25 parts13GPL-3.0
  • 2 layers10.2 × 27.7 mmXbox tray emulator, the printed circuit board in 3D

    Xbox tray emulator

    AR1972/Xbox_tray_emulator

    Original Xbox DVD tray emulation via ATtiny MCU

    6 parts6WTFPL
  • 2 layers26.2 × 29.7 mmDigipot, the printed circuit board in 3D

    Digipot

    dilshan/mcp4141-digital-pot

    MCP4141 and ATtiny13 based digital potentiometer

    5 parts5MIT
  • 2 layers70 × 50.1 mmDoom clock, the printed circuit board in 3D

    Doom clock

    stecman/avr-doomclock

    GPS clock on an ATTiny with MAX7219 7-segment driver

    24 parts5MIT
  • 2 layers40 × 25 mmToastFlow, the printed circuit board in 3D

    ToastFlow

    jaanuskalde/ToastFlow

    Toaster reflow oven controller

    23 parts1
  • 2 layers40 × 40 mmMCLB, the printed circuit board in 3D

    MCLB

    leandroebner/Morse-Code-LED-Blinker

    Designed for educational use, this minimalistic LED-based project offers an accessible and effective platform for learning the fundamentals of soldering, electronics, and programming.

    8 parts1CERN-OHL-S-2.0
  • 2 layers25.9 × 20.6 mmTinyBreakout, the printed circuit board in 3D

    TinyBreakout

    SteveMayze/tinyBreakout

    A small project to create a SMD ATTiny13 Breakout board

    16 parts1
  • 2 layersPCB D6, the printed circuit board in 3D

    PCB D6

    balintgerinm/PCB_D6

    22 parts
  • 2 layersAttiny board, the printed circuit board in 3D

    Attiny board

    ildus/attiny_board

    attiny13 testing board, with LED-s

    12 parts
  • 2 layers37 × 37 mmSimon, the printed circuit board in 3D

    Simon

    iogorodov/pcbs

    32 parts
  • 2 layers69.5 × 90.6 mmODM-01, the printed circuit board in 3D

    ODM-01

    khanaaaaaa/ODM-01

    27 parts
  • 2 layersSo16, the printed circuit board in 3D

    So16

    spaivaras/custom-pcbs

    My custom pcb/breakout boards

    6 partsMIT
  • 2 layersSpinnekop, the printed circuit board in 3D

    Spinnekop

    thoquz/Spinnekop-board

    A microcontroller development board for 8-pin ATtiny AVR chips.

    8 parts
  • 2 layers100 × 59 mmCoolgirl NES Rev6.x, the printed circuit board in 3D

    Coolgirl NES Rev6.x

    viuhimciuc/coolgirl-nes-multicart

    Ultimate multigame cartridge for Nintendo Entertainment System (NES)

    66 parts
  • 4 layers35 × 100 mmIc gate delay, the printed circuit board in 3D

    Ic gate delay

    xdylanm/gate-delay

    Gate delay module for Eurorack

    50 partsMIT
  • 2 layers85 × 35 mmUsbKVM, the printed circuit board in 3D

    UsbKVM

    YTvW/usbKVM-hardware

    A small two host -> 4 device usb switch with all connection on the back

    36 parts
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers45 × 41 mmBuzzer b, the printed circuit board in 3D

    Buzzer b

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    4 parts95CC0-1.0
  • 2 layers10 × 10 mmIRStart - Module, the printed circuit board in 3D

    IRStart - Module

    OPRobots/IRStart

    Módulo y mando de arranque por IR (RC-05) de robots usando Attiny13 y ESP32

    10 parts5GPL-3.0
  • 2 layers44 × 39 mmSlider, the printed circuit board in 3D

    Slider

    lucanastasio/myHomeAutomation

    Home automation stuff

    39 parts1
  • 2 layers10.4 × 11.4 mmSchematic start module sumo IR V0 16 v1, the printed circuit board in 3D

    Schematic start module sumo IR V0 16 v1

    Alex-C-EE/StartStopModule

    A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.

    20 parts