2 layers9.7 × 17 mm
Xbox dvd delete
AR1972/Xbox_tray_emulator
Original Xbox DVD tray emulation via ATtiny MCU
6 parts6WTFPL
2 layers10.2 × 27.7 mm
Xbox tray emulator
AR1972/Xbox_tray_emulator6Original Xbox DVD tray emulation via ATtiny MCU
- Size
- 10.2 × 27.7 mm
- Copper layers
- 2
- Thickness
- 0.6 mm
- Parts
- 6
- Nets
- 12
- Pads
- 30
- Tracks, vias
- 58, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Oct 2023
- Updated
- 15 Oct 2025
Overview
Xbox tray emulator is an open-source printed circuit board by AR1972, from the AR1972/Xbox_tray_emulator repository on GitHub, published under the WTFPL licence. It is a 2-layer board of 10.2 × 27.7 mm with 6 parts on 12 nets, routed with 58 tracks and 14 vias.
It is built around the ATTINY13A-SU. Its parts include 2 capacitors, 2 ICs, 1 resistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdOriginal Xbox DVD tray emulator
BOM
C1,C2 - 1uf 10v - 805
J1 - Hirose_DF11-14DP-2DSA not used for QSB
R1 - 10k - 805
U1 - ATTINY13A-SF or narrow ATTINY13A-SS7R - SOIC-8
U2 - AP2127N-3.3 - SOT-23
PCB ordering info
Layers: 2
Thickness: 1.2mm
Material: FR-4: TG150
Min track/spacing: 6/6mil
Min hole size: 0.3mm
Surface finish: HASL with lead
Via process: Tenting vias
Finished copper: 1 oz Cu
QSB ordering info
Layers: 2
Thickness: 0.6mm
Material: FR-4: TG150
Min track/spacing: 6/6mil
Min hole size: 0.3mm
Surface finish: HASL with lead
Via process: Tenting vias
Finished copper: 1 oz Cu
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | AP2127N-3.3 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | ATtiny13A-S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U1 |
| 1 | to Xbox | Connector_Hirose:Hirose_DF11-14DP-2DSA_2x07_P2.00mm_Vertical | J1 |
More from AR1972/Xbox_tray_emulator
1Similar boards
- 2 layers110 × 99.6 mm
PCIce
ZoidTechnology/PCIce
A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.
22 parts90GPL-3.0 - 2 layers180.1 × 180.3 mm
- 2 layers100.6 × 74.9 mm
Nes discrete mapper 1-1
MouseBiteLabs/NES-Cartridges
A collection of Nintendo Entertainment System (NES) cartridge circuit boards
55 parts25CC-BY-SA-4.0 - 2 layers51 × 43 mm
Egg timer
MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board
A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.
25 parts13GPL-3.0 - 2 layers26.2 × 29.7 mm
- 2 layers70 × 50.1 mm
- 2 layers40 × 25 mm
- 2 layers40 × 40 mm
MCLB
leandroebner/Morse-Code-LED-Blinker
Designed for educational use, this minimalistic LED-based project offers an accessible and effective platform for learning the fundamentals of soldering, electronics, and programming.
8 parts1CERN-OHL-S-2.0
Questions
How big is the Xbox tray emulator PCB?
It measures 10.2 × 27.7 mm and has 2 copper layers, 0.6 mm thick.
What parts does the Xbox tray emulator use?
6 parts, built around the ATTINY13A-SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xbox tray emulator KiCad files?
From the AR1972/Xbox_tray_emulator repository on GitHub, at the commit this page was made from: the board is PCB/QSB 1.6/xbox_tray_emulator.kicad_pcb and its schematic PCB/QSB 1.6/xbox_tray_emulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xbox tray emulator design in my own project?
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).