Skip to the content
2 layers69.5 × 90.6 mmODM-01, the printed circuit board in 3D
Size
69.5 × 90.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
17
Pads
66
Tracks, vias
103, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 May 2026
Updated
26 May 2026

Overview

ODM-01 is an open-source printed circuit board by khanaaaaaa, from the khanaaaaaa/ODM-01 repository on GitHub. It is a 2-layer board of 69.5 × 90.6 mm with 27 parts on 17 nets, routed with 103 tracks and 0 vias.

It is built around the ATTINY13A-SU and AO3400A. Its parts include 14 diodes, 6 resistors, 1 IC, 1 transistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

27
QtyValueFootprintReferences
14LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14
3100Resistor_SMD:R_0805_2012MetricR1, R2, R3
210kResistor_SMD:R_0805_2012MetricR4, R5
1470Resistor_SMD:R_0805_2012MetricR6
1AO3400APackage_TO_SOT_SMD:SOT-23Q1
1ATtiny13A-SPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU1
1BatteryBattery:BatteryHolder_Keystone_3034_1x20mmBT1
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1LOGOLOGOG***
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1TestPointTestPoint:TestPoint_Pad_D1.5mmTP1

Similar boards

  • 2 layers44 × 39 mmSlider, the printed circuit board in 3D

    Slider

    lucanastasio/myHomeAutomation

    Home automation stuff

    39 parts1
  • 2 layers110 × 99.6 mmPCIce, the printed circuit board in 3D

    PCIce

    ZoidTechnology/PCIce

    A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.

    22 parts90GPL-3.0
  • 2 layers180.1 × 180.3 mmLibreRouter MegaBoard, the printed circuit board in 3D

    LibreRouter MegaBoard

    LibreRouterOrg/board

    LibreRouter hardware repository

    237 parts55AGPL-3.0
  • 2 layers100.6 × 74.9 mmNes discrete mapper 1-1, the printed circuit board in 3D

    Nes discrete mapper 1-1

    MouseBiteLabs/NES-Cartridges

    A collection of Nintendo Entertainment System (NES) cartridge circuit boards

    55 parts25CC-BY-SA-4.0
  • 2 layers51 × 43 mmEgg timer, the printed circuit board in 3D

    Egg timer

    MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board

    A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.

    25 parts13GPL-3.0
  • 2 layers10.2 × 27.7 mmXbox tray emulator, the printed circuit board in 3D

    Xbox tray emulator

    AR1972/Xbox_tray_emulator

    Original Xbox DVD tray emulation via ATtiny MCU

    6 parts6WTFPL
  • 2 layers26.2 × 29.7 mmDigipot, the printed circuit board in 3D

    Digipot

    dilshan/mcp4141-digital-pot

    MCP4141 and ATtiny13 based digital potentiometer

    5 parts5MIT
  • 2 layers70 × 50.1 mmDoom clock, the printed circuit board in 3D

    Doom clock

    stecman/avr-doomclock

    GPS clock on an ATTiny with MAX7219 7-segment driver

    24 parts5MIT

Questions

How big is the ODM-01 PCB?

It measures 69.5 × 90.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ODM-01 use?

27 parts, built around the ATTINY13A-SU and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ODM-01 KiCad files?

From the khanaaaaaa/ODM-01 repository on GitHub, at the commit this page was made from: the board is PCB/ODM-01.kicad_pcb and its schematic PCB/ODM-01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ODM-01 design in my own project?

Its repository states no licence, so its author keeps all rights: ask khanaaaaaa before reusing the design.