Boards using the ATTINY10-TSH

36 boards

Boards in 29 GitHub repositories, designed in KiCad, that use the ATTINY10-TSH by Microchip Technology (-40℃~+85℃ 1.8V~5.5V 12MHz 1KB 32Byte 4 8 Bit 8bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function SOT-23-6 Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATTINY10-TSH’s symbol, footprint and pinout are on its own page.

2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50
2 layers7.4 × 12.2 mm
SMOL
heyspacebuck/SMOL
Slot-in Manipulator of Output Levels
19 parts16BSD-3-Clause
2 layers100 × 100 mm
Desklight panel
dpiegdon/tiny-ws2812-desklight
ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design
256 parts10GPL-3.0
2 layers13 × 10.2 mm
Noise guy
kinoshita-lab/noise-guy
noise generator made by ATTiny10
16 parts10MIT
2 layers65 × 56 mm
ElPiHat
HB9UF/ElPiHat
EchoLink Hat for Raspberry Pi
82 parts6
2 layers11.4 × 9.1 mm
PMIC
whinis/AttinyPMIC
Using an Attiny10 as a push button On/Off controller
4 parts6Unlicense
2 layers24.6 × 11.1 mm
PWM+fan stop
yvoronkin/FANSTOP
In a small form factor, an extension of the fan control is implemented.
24 parts2CERN-OHL-S-2.0
2 layers35.3 × 74.4 mm
Project 1 Master Controller Unit (Single Area)
AbhikSarkar1995/KiCAD-Projects

22 parts
2 layers134 × 83 mm
IDBoard
andywm/DrawerID

280 partsMIT
2 layers71 × 37 mm
Attiny10clock
antonloof/attiny10clock
How to not make a clock.
41 parts
2 layers62 × 57 mm
Attiny10dev
antonloof/attiny10prog

47 parts
2 layers106.5 × 27.3 mm
Nyan cat pcb
genavivermz/nyan-cat-pcb
my second project done with kicad; messing around with LEDs/PCBs to make cool keychains/deco :)
12 parts
2 layers24 × 15.5 mm
Ky040abs
GusHMeza/ky040abs
Turn a KY040 incremental encoder to an absolute encoder with a 1 wire interface.
8 partsGPL-3.0
2 layers93.5 × 91.4 mm
Noname
Hammie217/Sot23Breakout
A Sot23 Breakout board for a breadboard or any 2.54mm spaced device. (Designed for ATtiny10)
240 parts
2 layers11.7 × 14.2 mm
Sot23Breakout
Hammie217/Sot23BreakoutISP
A Sot23 Breakout board for a breadboard or any 2.54mm spaced device with ISP header. (Designed for ATtiny10)
4 parts
2 layers
BUUL hardware
ME-IRL/BUUL_hardware

23 parts
2 layers45 × 57 mm
Evil eye badge
oliverlc/evil_eye_badge
A quick and simple set of PCB badges
10 parts
2 layers57 × 58.8 mm
5V SMPS with Timer
sanketh0103/5V_SMPS-with-Timer
240V - 5V SMPS 1A Power supply, it has a relay that can be used to control mains powered devices. This PCB can also act as a timed switch.
57 parts
2 layers17.4 × 27 mm
Pwm fan control
zrgravity/pwm-fan-control
PWM Fan Control PCB and firmware
14 parts
2 layers8.9 × 11.4 mm
Attiny10
guanix/boards
Various PCB designs in KiCad
4 parts73
2 layers
Touchuc
jonnor/projects
Small projects not worthy of dedicated repositories
17 parts45
2 layers33 × 9.5 mm
Micro peripherals
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
13 parts14Apache-2.0
2 layers17.1 × 20.6 mm
USBload2
akita11/USBload
Dummy USB load
16 parts13
2 layers25 × 25 mm
Desklight
dpiegdon/tiny-ws2812-desklight
ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design
16 parts10GPL-3.0