Skip to the content
123456

ATTINY10-TSH

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 12MHz 1KB 32Byte 4 8 Bit 8bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function SOT-23-6 Microcontrollers (MCU/MPU/SOC) ROHS

DatasheetJLCPCBLCSC
Part id
microchip/ATTINY10-TSH
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOT-23-6
Pins
6
In stock
442 at JLCPCB (C128438)
Used on
36 open-source boards

Overview

The ATTINY10-TSH is a microcontroller made by Microchip Technology in a SOT-23-6 package with 6 pins. -40℃~+85℃ 1.8V~5.5V 12MHz 1KB 32Byte 4 8 Bit 8bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function SOT-23-6 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny10-TS, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 442 are in stock at JLCPCB (part C128438). 36 open-source boards in 29 repositories on GitHub use it.

Symbol

PB01GND2PB13PB24VCC5RESET/PB36
MCU_Microchip_ATtiny:ATtiny10-TSFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the ATTINY10-TSH
PinNameType
1PB0Input/output
2GNDPower in
3PB1Input/output
4PB2Input/output
5VCCPower in
6RESET/PB3Input/output

Open-source boards using it

36See all 36
  • 2 layers200 × 100 mmRegalodilara, the printed circuit board in 3D

    Regalodilara

    valerionew/very-good-uc-doggos

    A special graduation present for a special friend. Six microcontrollers in one devboard

    91 parts50
  • 2 layers7.4 × 12.2 mmSMOL, the printed circuit board in 3D

    SMOL

    heyspacebuck/SMOL

    Slot-in Manipulator of Output Levels

    19 parts16BSD-3-Clause
  • 2 layers100 × 100 mmDesklight panel, the printed circuit board in 3D

    Desklight panel

    dpiegdon/tiny-ws2812-desklight

    ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design

    256 parts10GPL-3.0
  • 2 layers13 × 10.2 mmNoise guy, the printed circuit board in 3D

    Noise guy

    kinoshita-lab/noise-guy

    noise generator made by ATTiny10

    16 parts10MIT
  • 2 layers65 × 56 mmElPiHat, the printed circuit board in 3D

    ElPiHat

    HB9UF/ElPiHat

    EchoLink Hat for Raspberry Pi

    82 parts6
  • 2 layers11.4 × 9.1 mmPMIC, the printed circuit board in 3D

    PMIC

    whinis/AttinyPMIC

    Using an Attiny10 as a push button On/Off controller

    4 parts6Unlicense
  • 2 layers24.6 × 11.1 mmPWM+fan stop, the printed circuit board in 3D

    PWM+fan stop

    yvoronkin/FANSTOP

    In a small form factor, an extension of the fan control is implemented.

    24 parts2CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY10-TSH?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny10-TS and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY10-TSH?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the ATTINY10-TSH datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY10-TSH?

JLCPCB lists it as part C128438, with 442 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY10-TSH?

Parts like it in the library: the FT61F020-URT by FMD, the PIC10LF322-I/OT by Microchip Technology, the FT60F210-URT by FMD and the XMC8P53S6 by Shenzhen Fuman Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY10-TSH?

36 boards in 29 repositories on GitHub; the most starred are listed on this page, with their KiCad files.