/Project_1_Master_Controller_Unit%20(Single%20Area)_2_Layer.kicad_pcb.jpg?size=s&soon)

Project 1 Master Controller Unit (Single Area)
- Size
- 35.3 × 74.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 20
- Pads
- 62
- Tracks, vias
- 163, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Sep 2026
- Updated
- 21 Sep 2026
Overview
Project 1 Master Controller Unit (Single Area) is an open-source printed circuit board by AbhikSarkar1995, from the AbhikSarkar1995/KiCAD-Projects repository on GitHub. It is a 2-layer board of 35.3 × 74.4 mm with 22 parts on 20 nets, routed with 163 tracks and 8 vias.
It is built around the ATTINY10-TSH, HLK-PM01 and BC847, with the SRD-5VDC-SL-A among its other parts. Its parts include 5 resistors, 4 connectors, 3 ICs, 2 diodes and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY10-TSH
SOT-23-6-40℃~+85℃ 1.8V~5.5V 12MHz 1KB 32Byte 4 8 Bit 8bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function SOT-23-6 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)SRD-5VDC-SL-A
插件,19.2x15.6mm1 Set Normally Open: 1A (SPST NO) 100mΩ 10ms 10ms 15A 250V@AC 360mW 4 5V 70Ω Non-Polarized - Single Coil 插件,19.2x15.6mm Power Relays ROHS松乐Power Relays
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | PC817 | Package_DIP:SMDIP-4_W7.62mm | U2, U3 |
| 1 | 0.1uF | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1 |
| 1 | 1N4007 | Diode_SMD:D_SOD-323 | D1 |
| 1 | ATtiny10-TS | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Horizontal | J2 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | LED | LED_THT:LED_D3.0mm | D2 |
| 1 | LOGO | LOGOS:Details_V0.0_30-11-2025.kicad_mod_20mmX5.7mm | G*** |
| 1 | SRD_5VDC | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-105xP | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J3 |
The 20 most common of 22 parts.
More from AbhikSarkar1995/KiCAD-Projects
4- 2 layers35.2 × 73.8 mm
/Project_1_Master_Controller_Unit%20(Single%20Area)_2_Layer.kicad_pcb.jpg?size=s&soon)
- 2 layers30.6 × 27.4 mm

- 2 layers

- 2 layers13 × 11.1 mm

Similar boards
- 2 layers99.5 × 74 mm

- 2 layers96.5 × 81.3 mm

- 2 layers87 × 62.2 mm

HestiaPi KiCAD
HestiaPi/hestia-touch-pcb-dev
Testing release for the PCB files for HestiaPi Touch
13 parts11GPL-3.0 - 2 layers200 × 100 mm

Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers7.4 × 12.2 mm

- 2 layers100 × 100 mm

Desklight panel
dpiegdon/tiny-ws2812-desklight
ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design
256 parts10GPL-3.0 - 2 layers13 × 10.2 mm

- 2 layers65 × 56 mm

Questions
How big is the Project 1 Master Controller Unit (Single Area) PCB?
It measures 35.3 × 74.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project 1 Master Controller Unit (Single Area) use?
22 parts, built around the ATTINY10-TSH, HLK-PM01, BC847 and SRD-5VDC-SL-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project 1 Master Controller Unit (Single Area) KiCad files?
From the AbhikSarkar1995/KiCAD-Projects repository on GitHub, at the commit this page was made from: the board is Project_1_Master_Controller_Unit (Single Area)/Project_1_Master_Controller_Unit (Single Area).kicad_pcb and its schematic Project_1_Master_Controller_Unit (Single Area)/Project_1_Master_Controller_Unit (Single Area).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project 1 Master Controller Unit (Single Area) design in my own project?
Its repository states no licence, so its author keeps all rights: ask AbhikSarkar1995 before reusing the design.