Skip to the content
2 layers45 × 57 mmEvil eye badge, the printed circuit board in 3D

A quick and simple set of PCB badges

Size
45 × 57 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
9
Pads
33
Tracks, vias
49, 5
Routed
Yes
KiCad
KiCad 4
Created
24 May 2018
Updated
9 Sep 2018

Overview

Evil eye badge is an open-source printed circuit board by oliverlc, from the oliverlc/evil_eye_badge repository on GitHub. It is a 2-layer board of 45 × 57 mm with 10 parts on 9 nets, routed with 49 tracks and 5 vias.

It is built around the ATTINY10-TSH. Its parts include 3 resistors, 2 diodes, 1 IC, 1 connector and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

A simple project for experimenting with creating a PCB with a more creative than functional purpose. Taking inspiration from people in the USA who create badges for conferences for fun, art, and to show off.

These badges are a simple skull graphic, with a ATTINY10 microcontroller fading in and out two LEDS in the skulls eye sockets. The LEDS fade in over a second, remain on for 5 seconds, fade out over another second, then remain off for 30 seconds (ish) before repeating.

The process involved: • Finding a vector image I was happy with (I’m no graphic artist) • Splitting the vector image into layers using Inkscape • Importing the layers I’ve created into KiCad using SVG2MOD • Adding a functional circuit (a micro controller driving two PWM leds) • Getting the boards made • Populating the boards • ????? • Profit! (If only!)

I was wearing these badges at the bi-annual UK hacker camp ElectroMagnetic Field (EMF). They didn’t quite get the interest I expected. Perhaps they were over-shadow by another of my projects: the LED light staff!

The KiCad and Gerber files using the skull graphic from vectormagic.com are notable only by their absence. Apologies for that. I wanted to make sure I was on the right side of their licence and wasn't sure if this would count as distributing via another website. I assume their licence is referring to distributing the vector original but don't want to risk it.

Badge Front Badge Read

Parts

10
QtyValueFootprintReferences
2120RResistors_SMD:R_0603_HandSolderingR2, R3
2LEDLEDs:LED_miniPLCC_2315_HandsolderingD1, D2
1ATTINY10-TSTO_SOT_Packages_SMD:SOT-23-6U1
1Battery_Cellparts:Battery_holder_CR2032BT1
1Conn_01x05Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mmJ1
1DNFResistors_SMD:R_0603_HandSolderingR1
1SW_DIP_x01Buttons_Switches_SMD:SW_SPDT_PCM12SW1

The 9 most common of 10 parts.

Similar boards

  • 2 layers200 × 100 mmRegalodilara, the printed circuit board in 3D

    Regalodilara

    valerionew/very-good-uc-doggos

    A special graduation present for a special friend. Six microcontrollers in one devboard

    91 parts50
  • 2 layers7.4 × 12.2 mmSMOL, the printed circuit board in 3D

    SMOL

    heyspacebuck/SMOL

    Slot-in Manipulator of Output Levels

    19 parts16BSD-3-Clause
  • 2 layers100 × 100 mmDesklight panel, the printed circuit board in 3D

    Desklight panel

    dpiegdon/tiny-ws2812-desklight

    ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design

    256 parts10GPL-3.0
  • 2 layers13 × 10.2 mmNoise guy, the printed circuit board in 3D

    Noise guy

    kinoshita-lab/noise-guy

    noise generator made by ATTiny10

    16 parts10MIT
  • 2 layers65 × 56 mmElPiHat, the printed circuit board in 3D

    ElPiHat

    HB9UF/ElPiHat

    EchoLink Hat for Raspberry Pi

    82 parts6
  • 2 layers11.4 × 9.1 mmPMIC, the printed circuit board in 3D

    PMIC

    whinis/AttinyPMIC

    Using an Attiny10 as a push button On/Off controller

    4 parts6Unlicense
  • 2 layers24.6 × 11.1 mmPWM+fan stop, the printed circuit board in 3D

    PWM+fan stop

    yvoronkin/FANSTOP

    In a small form factor, an extension of the fan control is implemented.

    24 parts2CERN-OHL-S-2.0

Questions

How big is the Evil eye badge PCB?

It measures 45 × 57 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Evil eye badge use?

10 parts, built around the ATTINY10-TSH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Evil eye badge KiCad files?

From the oliverlc/evil_eye_badge repository on GitHub, at the commit this page was made from: the board is hw/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Evil eye badge design in my own project?

Its repository states no licence, so its author keeps all rights: ask oliverlc before reusing the design.