2 layers
2 layers
BUUL hardware
ME-IRL/BUUL_hardware- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 9
- Pads
- 53
- Tracks, vias
- 75, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Feb 2019
- Updated
- 17 Feb 2019
Overview
BUUL hardware is an open-source printed circuit board by ME-IRL, from the ME-IRL/BUUL_hardware repository on GitHub. It is a 2-layer board with 23 parts on 9 nets, routed with 75 tracks and 0 vias.
It is built around the ATTINY10-TSH. Its parts include 11 capacitors, 3 resistors, 3 diodes, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C3, C4, C5, C6, C7, C8, C9, C10 |
| 2 | 22uF | Capacitors_SMD:C_1206_HandSoldering | C2, C11 |
| 2 | 470 | Resistors_SMD:R_0805 | R1, R3 |
| 2 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1, J2 |
| 2 | LED | LEDs:LED_1206 | D2, D3 |
| 1 | 10k | Resistors_SMD:R_0805 | R2 |
| 1 | 10uH | custom:WE | L1 |
| 1 | 4.7uF | Capacitors_SMD:C_0402 | C1 |
| 1 | ATtiny10-TS | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | D | Diodes_SMD:D_SOD-123F | D1 |
| 1 | Q_PMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
More from ME-IRL/BUUL_hardware
1Similar boards
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers7.4 × 12.2 mm
- 2 layers100 × 100 mm
Desklight panel
dpiegdon/tiny-ws2812-desklight
ATTiny10 powered WS2812 RGB LED strip: hard- and firmware design
256 parts10GPL-3.0 - 2 layers13 × 10.2 mm
- 2 layers65 × 56 mm
- 2 layers11.4 × 9.1 mm
- 2 layers24.6 × 11.1 mm
PWM+fan stop
yvoronkin/FANSTOP
In a small form factor, an extension of the fan control is implemented.
24 parts2CERN-OHL-S-2.0 - 2 layers35.3 × 74.4 mm
Questions
What parts does the BUUL hardware use?
23 parts, built around the ATTINY10-TSH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BUUL hardware KiCad files?
From the ME-IRL/BUUL_hardware repository on GitHub, at the commit this page was made from: the board is V2/V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BUUL hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask ME-IRL before reusing the design.