
Boards using the ATSAMD21G18A-AU
70 boardsBoards in 58 GitHub repositories, designed in KiCad, that use the ATSAMD21G18A-AU by Microchip Technology (-40℃~+85℃ 1.62V~3.6V 10bit 12bit 256KB 32 Bit 32KB 38 48MHz ARM Cortex-M0+ Built-in FLASH 上电复位(POR)、欠压检测(BOR/LVD/LVR/LVI)、看门狗复位、内置通用定时器、硬件CRC、日历功能、触控功能 TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATSAMD21G18A-AU’s symbol, footprint and pinout are on its own page.
- 4 layers70.8 × 108 mm

- 2 layers36 × 20 mm

- 4 layers35.1 × 76.3 mm

Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
90 parts96CERN-OHL-W-2.0 - 4 layers36.6 × 60.3 mm

StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
85 parts43 - 4 layers42 × 83.9 mm

StratoSoar MK2.2
crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.
116 parts24 - 2 layers69.8 × 40.4 mm

T Piece Kicad
calebmarting/os2026-badge
Schematics and firmware for the Open Sauce 2026 Badge and SAOs
82 parts23MIT - 2 layers51.8 × 51.8 mm

Pawpet
NanoCodeBug/pawpet
A virtual pet using the atsamd21g and sharp memory lcd, runs off of 2xAAA for a couple of months. See PawPet on Hacakday.io for full gallery.
41 parts20 - 4 layers117 × 107 mm

Mainboard dual battery
shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython
121 parts8MIT - 2 layers120 × 90 mm

- 2 layers44.5 × 50.8 mm

- 4 layers50.8 × 81.3 mm

- 2 layers62.5 × 83.8 mm

- 2 layers51.2 × 19.1 mm

SamdNano
crnicholson/samdNano
The samdNano+ is based on the Arduino Nano board. The format was extended to allow for more pins to be broken out.
34 parts3CERN-OHL-S-2.0 - 2 layers43 × 43 mm

Mechaduino Hardware KiCad
IDMIL/Mechaduino-Hardware-KiCad
An updated KiCad port of Tropical Labs' open-source industrial servo.
64 parts3 - 2 layers76.2 × 112 mm

IOBoard ATSAMD21
jelkinsjames/chameleon-PCB
This repo has all the PCB designs for the UW Engine 2023 Chameleon digital synth project.
67 parts3GPL-3.0 - 2 layers84.1 × 97.1 mm

- 2 layers50 × 60 mm

- 4 layers88.9 × 40.6 mm

Ci poc board
AP-IT-GH/ci-poc-board
Development of Proof of Concept board for the Connected Islands project @ KIST (Zanzibar)
39 parts1 - 2 layers53 × 22.5 mm

Breezedude transmitter
Breezedude/breezedudeWindSensor-pcb
PCB of Breezedude Wind Sensor Transmitter
59 parts1 - 2 layers157.4 × 59 mm

- 2 layers40 × 46.2 mm

- 2 layers46.3 × 75 mm

Finalpcb landreesen
LukeAndreesen/studyPCB
A Study Timer PCB Project - hold yourself accountable by setting the timer, attaching your phone to the detector, and sitting in front of the module.
76 parts1 - 4 layers22.9 × 62.2 mm

- 2 layers101.4 × 69.4 mm
