Skip to the content

Boards using the SMAJ6.0A

31 boards

Boards in 29 GitHub repositories, designed in KiCad, that use the SMAJ6.0A by Littelfuse (-65℃~+150℃ 10.3V 38.8A 400W@10/1000us 6V 7.37V 800uA IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the SMAJ6.0A’s symbol, footprint and pinout are on its own page.

  • 2 layers158 × 63 mmOven controller, the printed circuit board in 3D

    Oven controller

    codeThatThinks/oven-controller-hw

    A Raspberry Pi Zero-powered PID reflow oven controller -- PCB design files

    66 parts5
  • 4 layers165.2 × 72 mmAudiograb, the printed circuit board in 3D

    Audiograb

    oveljosland/audiograb-pcb

    Design files for the Audiograb PCB.

    134 parts4CERN-OHL-S-2.0
  • 2 layers86 × 36 mmVacuum Tweezers, the printed circuit board in 3D

    Vacuum Tweezers

    ARENARobotics/MiniPic

    Open-source benchtop vacuum tweezer engineered for SMD soldering, rework, and precision part handling

    31 parts3CERN-OHL-S-2.0
  • 4 layers50 × 70 mmStm32-portable data logger, the printed circuit board in 3D

    Stm32-portable data logger

    copperheadhq/copperhead-stm32-data-logger

    Portable STM32L433 data logger, 50 × 70 mm, four layers, microSD, USB-C LiPo charging. Designed with copperhead. Never built: do not order expecting it to work.

    90 parts3
  • 4 layers46.3 × 37.7 mmInterface, the printed circuit board in 3D

    Interface

    earlynerd/bl4818-servo-M23

    This repository contains the electronics, embedded firmware, host software, and browser players for a network of brushless servo percussion actuators.

    20 parts3
  • 2 layers100 × 64 mmAc tester production, the printed circuit board in 3D

    Ac tester production

    EVtivity/evtivity-ev-tester

    An open-source, EV-side charging simulator. It emulates an electric vehicle so you can test AC charging stations (EVSE) and CSMS backends on the bench, without a real car.

    68 parts3
  • 4 layers100 × 50 mmSTM32H7 Board, the printed circuit board in 3D

    STM32H7 Board

    phancak/STM32H7_Board

    High-Performance STM32H7S3 System-on-Module | 600MHz ARM Cortex-M7 | External SDRAM & NAND Flash Integration | 4-Layer High-Speed PCB optimized for real-time control and LCD UI.

    112 parts3MIT
  • 2 layers100 × 50 mmIMU Board, the printed circuit board in 3D

    IMU Board

    phancak/IMU_Board

    6-Axis IMU + Qvar Sensing Node with Edge AI capabilities. Specialized for high-accuracy motion tracking and charge-variation detection in modular embedded systems.

    42 parts2MIT
  • 2 layers58 × 63 mmCamping LightRelay, the printed circuit board in 3D

    Camping LightRelay

    Rustaphor/LightRelay4Camping

    Analog light sensor to night power up LED garland. For Camping use.

    91 parts2GPL-3.0
  • 2 layers49 × 50 mmPlant watering system, the printed circuit board in 3D

    Plant watering system

    Excse/plant-watering-system

    A completely selfmade smart watering system for plants of any kind integrated into HomeAssistant

    45 parts1
  • 2 layers99.6 × 99.1 mmPCB v0.3, the printed circuit board in 3D

    PCB v0.3

    iloevera/hku-martians-prototype

    15A 10x10cm 2-layer Robot Controller & PDB for Pi 5 & Pico 2. 22.2V input, 12V/7.5V/5.1V rails, 6 DC motors, 6 encoders, 4 servos.

    61 parts1CERN-OHL-W-2.0
  • 4 layers98 × 100 mmEsp32s3-can sd logger, the printed circuit board in 3D

    Esp32s3-can sd logger

    MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard

    A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.

    164 parts1
  • 2 layers120 × 80 mmBiometric scanner, the printed circuit board in 3D

    Biometric scanner

    Sid93/levram-biometric-attendance-scanner

    ESP32-S3 face-recognition factory attendance terminal — firmware, KiCad PCB, OpenSCAD enclosure, BOM

    45 parts1
  • 4 layers30 × 30 mmMagnetic encoder, the printed circuit board in 3D

    Magnetic encoder

    another-greg/MT6835_encoder_breakout_board

    Simple breakout board for the MT6835 magnetic rotary encoder.

    10 parts
  • 4 layers110 × 55 mmMain interface board, the printed circuit board in 3D

    Main interface board

    callumsnowden/emfkart

    A "go-kart" made from aluminium extrusion using hoverboard parts & an ODrive for propulsion.

    88 partsMIT
  • 2 layers120 × 60 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    itsmeibii/SplitFlap-Control-Board

    Raspberry Pi 4 control board for a split-flap display + HUB75 LED panels: USB-C PD input, 8A buck, Pi eFuse. KiCad, gerbers, BOM, enclosure.

    62 parts
  • 4 layers52.8 × 40.1 mmBTM308-host, the printed circuit board in 3D

    BTM308-host

    KingJacker/BTM308-bluetooth-module-host

    This is a carrier board for the BTM308 Bluetooth audio module.

    52 parts
  • 4 layers99.4 × 107.3 mmMLAB MCU pcb, the printed circuit board in 3D

    MLAB MCU pcb

    ktu-proto-lab/MLAB_MCU_pcb

    PCB for testing the MLAB_MCU project

    96 parts
  • 4 layers124 × 89.4 mmATMega 328 PU Board, the printed circuit board in 3D

    ATMega 328 PU Board

    olexsu/ATmega328_control_Board

    Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.

    140 parts
  • 4 layers163 × 117 mmTeensy 4.1 + Jetson Nano powered from board, the printed circuit board in 3D

    Teensy 4.1 + Jetson Nano powered from board

    olexsu/inos-rev-a-robotics-controller

    INOS Rev A — CAN-based robotic arm controller designed as a real-time motion-control node for NVIDIA Jetson robotics systems.

    157 partsMIT
  • 4 layers100 × 50 mmESP32C6 Board, the printed circuit board in 3D

    ESP32C6 Board

    phancak/ESP32C6_Board

    A versatile ESP32-C6 expansion board featuring Wi-Fi 6 and Bluetooth 5, designed for modular integration in proof-of-concept embedded projects.

    76 partsMIT
  • 6 layers120.9 × 90 mmSvayamV3 IIK, the printed circuit board in 3D

    SvayamV3 IIK

    si-nalsal/pcb-mantis

    A servo-based UAV flight controller built around the STM32H743IIK6 (Cortex-M7, UFBGA-201, 0.65 mm pitch). The board distributes power to a fixed-wing/multirotor airframe with 16 PWM servo outputs, redundant IMU and…

    290 partsCERN-OHL-S-2.0
  • 6 layers63.7 × 24 mmPocketssd-21, the printed circuit board in 3D

    Pocketssd-21

    tracelabs-pcb/pocketssd-21

    Compact USB 3.2 Gen2 to NVMe M.2 bridge PCB — JMS583, 6-layer

    85 parts