Skip to the content

Boards using the TX 1

37 boards

Boards in 31 GitHub repositories, designed in KiCad, that use the TX 1 by Kaisi (- Microscope Accessories). See how each wires it, with its parts, size, README and files; the TX 1’s symbol, footprint and pinout are on its own page.

  • 4 layers70 × 70 mm1.Electronics, the printed circuit board in 3D

    1.Electronics

    I-M-Robotics-Lab/STM32-Quadcopter

    Quadcopter design based on STM32F411CEU Blackpill flight controller. Compatible with INAV 6.0 firmware.

    57 parts80GPL-3.0
  • 2 layers91.4 × 73.7 mmSoc, the printed circuit board in 3D

    Soc

    mattstock/bexkat1

    An experimental CPU design

    64 parts15
  • 4 layers30.9 × 30.9 mmFpv video in v1, the printed circuit board in 3D

    Fpv video in v1

    Cinetronix/fpv-video-in-v1

    KiCad hardware design for an HDMI-to-MIPI CSI bridge board, designed for FPV camera systems.

    48 parts11
  • 2 layersDps rs232, the printed circuit board in 3D

    Dps rs232

    radioelf/DPS5015--Nextion

    Control 2 DPS5015 con pantalla Nextion y arduino nano

    33 parts7
  • 2 layers10.6 × 18.5 mmAsmartcap xMoto, the printed circuit board in 3D

    Asmartcap xMoto

    xpix/XMOTO_TINYAVR

    This code is designed for a motor controller and has merged the PID code of Josh Kopel with the code of the Makerbot servo-controller board. This code can be used on some boards by changing some values.

    21 parts6
  • 4 layers79 × 93 mmWeatherStation, the printed circuit board in 3D

    WeatherStation

    hcmusthinhcode2k2/WeatherStation_Thesis

    Graduation thesis topic is the design of a weather monitoring station using NB-IoT technology

    203 parts2
  • 2 layers50 × 80 mmDev Board, the printed circuit board in 3D

    Dev Board

    yasir-khilji-64/CAN-Transceiver-with-PIC18F2580-and-MCP2551

    62 parts2
  • 2 layers51.5 × 92 mmEcoport bridge v1, the printed circuit board in 3D

    Ecoport bridge v1

    jrowe88/ecoport-bridge

    CTA-2045 (EcoPort) bridge for a Rinnai REHP65 heat pump water heater

    74 parts1AGPL-3.0
  • 2 layers50 × 50 mmLAB3, the printed circuit board in 3D

    LAB3

    lengoctuong2005/KiCad-PCB-Labs

    Tập hợp toàn bộ các bài thực hành và đồ án thiết kế PCB (KiCad) trong khóa học Thiết kế Mạch In / Vi Mạch.

    38 parts1
  • 2 layers117.5 × 55 mmGeneric module, the printed circuit board in 3D

    Generic module

    monsterzack5/AutoMato

    A Car based automation framework, fully integrated with Node-Red!

    73 parts1
  • 4 layers40 × 40 mmShiroFPV Flight Controller, the printed circuit board in 3D

    ShiroFPV Flight Controller

    ShiroFPV/ShiroFPV_Flight_Controller_Collection

    Official repository for public ShiroFPV flight controller designs, encompassing fully verified productions as well as ongoing, untested hardware revisions.

    116 parts1CERN-OHL-S-2.0
  • 2 layers75.3 × 86 mmRS485, the printed circuit board in 3D

    RS485

    Solderingironspb/ModbusRTU_Master_MQTT_Gateway

    Данное устройство выступает мастером сети ModbusRTU. Обменивается данными с подчиненными устройствами (до 247 устройств на линии RS485).

    67 parts1
  • 2 layers61 × 88.9 mmSdisfp, the printed circuit board in 3D

    Sdisfp

    cleverfox/sdisfp

    110 parts
  • 2 layers27.9 × 109 mmBritneyDrone, the printed circuit board in 3D

    BritneyDrone

    cornellmotionstudio/BritneyDrone

    Prototype #2 of The Drone Squad, nicknamed Britney

    18 partsMIT
  • 2 layers33 × 128.5 mmEncoder, the printed circuit board in 3D

    Encoder

    cukier/LoraProgrammer

    Firmware ESP32 (ESP-IDF) para programar e configurar módulos de rádio LoRa, expondo a configuração através de um servidor HTTP em Wi-Fi (SoftAP/STA), acessível também via mDNS (http:// .local/).

    84 partsMIT
  • 2 layers146.7 × 121.9 mmDFboard2, the printed circuit board in 3D

    DFboard2

    dmrossman/DataFlow

    Creating a clone of DataFlow for NV10 implanters from scratch

    42 parts
  • 2 layers400 × 40 mmPTL RAIL, the printed circuit board in 3D

    PTL RAIL

    mayoogh-flexli/Meesho-Put-To-Light

    Modular, daisy-chained 5-node IR emitter/receiver rail for the Meesho put-to-light system. Each 400 mm board has five bin positions on an 84 mm pitch.

    147 parts
  • 2 layers123.3 × 143.8 mmIso adc cvm, the printed circuit board in 3D

    Iso adc cvm

    OisinS13/FC_IP_rig

    Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack

    176 partsGPL-3.0
  • 2 layers63.3 × 63.1 mmNano drone, the printed circuit board in 3D

    Nano drone

    radioelf/nano_Drone_ESP32

    Small drone with ESP32 to experiment with this https://github.com/rtlopez/esp-fc

    59 parts
  • 2 layers50 × 79 mmUSBHostRS232, the printed circuit board in 3D

    USBHostRS232

    romi2002/RS232USBHost

    54 parts
  • 4 layers193.2 × 52.8 mmControl board, the printed circuit board in 3D

    Control board

    paradise-fi/RoFI

    Distributed Metamorphic Robots

    93 parts42
  • 4 layers92.7 × 53.4 mmSensEdu, the printed circuit board in 3D

    SensEdu

    ShiegeChan/SensEdu

    Ultrasonic Ranging & Detection Development Shield for Arduino GIGA R1

    148 parts7GPL-3.0
  • 2 layers100 × 100 mmMicromod carrier, the printed circuit board in 3D

    Micromod carrier

    TomKeddie/prj-pcb-experiments

    91 parts4BSD-2-Clause