2 layers197 × 249.7 mm
Boards using the HS96L03W2C03
64 boardsBoards in 59 GitHub repositories, designed in KiCad, that use the HS96L03W2C03 by HS (-40℃~+70℃ 0.96 128x64 180cd/m2 21.744x10.864mm I2C Passive (PMOLED) SSD1315 chip White - OLED Display ROHS). See how each wires it, with its parts, size, README and files; the HS96L03W2C03’s symbol, footprint and pinout are on its own page.
- 4 layers51 × 77 mm
- 2 layers42 × 98.1 mm
- 2 layers108 × 65 mm
- 2 layers56.8 × 66.2 mm
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!
14 parts5 - 2 layers60 × 90 mm
Cinder
CircuitGuy943/CinderV2-Filament-Dryer
(🚧) A filament dryer to precede my old one made inside a wooden box that never worked properly and didn't heat anything. Features to be estabilished
40 parts4GPL-3.0 - 4 layers56 × 28 mm
Bx tacho
dazchi/bx-tacho
Open DIY Beyblade X launcher RPM meter: ESP32-C3 with IR sensors and an OLED, Bluetooth (Battle Pass protocol), and a browser app for shot data and firmware updates. KiCad hardware, ESP-IDF firmware, 3D-printed case.
51 parts3GPL-3.0 - 2 layers180 × 110 mm
- 2 layers50 × 75 mm
- 2 layers85 × 66 mm
- 2 layers52.5 × 64.8 mm
- 2 layers70.6 × 76 mm
- 2 layers90 × 85 mm
MultiBench
M-Mrk/MultiBench
A bench multimeter with the usual functions, but also with usb connectivity to log, stream and monitor readings.
87 parts1 - 2 layers34 × 99.5 mm
- 2 layers99.9 × 89.9 mm
- 2 layers64.3 × 76.8 mm
Tamagotchi
shelxty/lego-tamagotchi
Simple tamagotchi with OLED display screen, buzzer, and 3 buttons custom-made in KiCad, with parts assembled in OnShape.
10 parts1 - 2 layers100 × 100 mm
Audio in usd sound rp pico
snarrn/Raspberry_Pi_Pico_MultiBoard
This is a PCB with OLED, LaserTag, two Radio Receivers, Oscillotor, Sound Card for PC, Smoke Detector, LEDs, Maze Game, Accelerometer, Motor/Speaker Drivers, two Proximity Detecters, Thermometer, Photo Detector, Etc.
275 parts1MIT - 2 layers99.9 × 127.5 mm
Msxdoc proto
tarinaroope/msx-pulse
A diagnostic cartridge for MSX computers. Very much a work in progress. This is at proof-of-concept stage. It boots, it reads the bus, it tells you things, but it's a long way from a finished product.
71 parts1MIT - 4 layers108.9 × 40.4 mm
SUB tember Titan
theBrutzler/U-Bootloader
Learnin PCB with many Sensors. Made in Twitchstream. SUB Tember board!
90 parts1 - 2 layers89.5 × 66.2 mm
- 2 layers
Releastic tamagotchi
alex-technologia/Realistic-tamagochi
A tamagochi but much more realistically accurate
10 parts - 2 layers101.4 × 60 mm
Atmega328p Spot welder
ANSHUMANDOCX/Spot-Welder-with-MCU
this is a spot welder for 18650 batteries made using mosfets along with a atemga328p and rotary encoder along with a display and a 12v lead acid battery
100 parts - 4 layers214.7 × 90.3 mm
- 2 layers74.4 × 97.8 mm
Tamagotchi
Ayush09S/Tamagotchi
A small digital pet as a physical device remake! It features an LDR that can detect light changes, four buttons, and a buzzer. It also has an OLED display!
16 partsMIT