4 layers204 × 184 mm
4 layers108.9 × 40.4 mm
SUB tember Titan
theBrutzler/U-Bootloader1Learnin PCB with many Sensors. Made in Twitchstream. SUB Tember board!
- Size
- 108.9 × 40.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 80
- Pads
- 327
- Tracks, vias
- 821, 110
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2025
- Updated
- 16 Oct 2025
Overview
SUB tember Titan is an open-source printed circuit board by theBrutzler, from the theBrutzler/U-Bootloader repository on GitHub. It is a 4-layer board of 108.9 × 40.4 mm with 90 parts on 80 nets, routed with 821 tracks and 110 vias.
It is built around the ESP32-S2-SOLO-2-N4, AP62300Z6 and TMP102AIDRLR(UMW), with the VL53L8CXV0GC/1, HS96L03W2C03 and SMD7525-16Ω among its other parts. Its parts include 36 resistors, 19 capacitors, 10 ICs, 7 connectors and 6 transistors. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
7
ESP32-S2-SOLO-2-N4
SMD-41P-40℃~+85℃ -97dBm 19.5dBm 2.4GHz 310mA 3V~3.6V 71mA ESP32-S2 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD-41P WiFi Modules ROHSEspressif SystemsWiFi Modules
AP62300Z6
SOT-563-40℃~+125℃ 1 155uA 3A 4.2V~18V 750kHz 800mV~7V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersTMP102AIDRLR(UMW)
SOT-563-40℃~+125℃ 1.4V~5.5V 12bit 26ms I2C、SMBus Temperature threshold monitoring、Low-power standby、Configurable temperature output ±0.5℃ SOT-563 Temperature Sensors ROHSUMWTemperature Sensors
VL53L8CXV0GC/1
LGA-16Low power mode、Interrupt output ToF Distance Sensor LGA-16 Specialized Sensors ROHSSTMicroelectronicsSpecialized Sensors
HS96L03W2C03
--40℃~+70℃ 0.96 128x64 180cd/m2 21.744x10.864mm I2C Passive (PMOLED) SSD1315 chip White - OLED Display ROHSHSOLED Display
SMD7525-16Ω
SMD,7.5x7.5mmUncategorisedXHXDZ
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdU-Bootloader
Learnin PCB with many Sensors. Made in Twitchstream. SUB Tember board!
I created a board!
with interesting backside XD
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10K | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R22, R23, R24, R27, R28, R29 +9 |
| 14 | 1µ | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C17, C19 |
| 6 | 5K1 | Resistor_SMD:R_0402_1005Metric | R25, R26, R30, R31, R32, R33 |
| 6 | Q_NMOS_Depletion_GSD | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16, C18 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4, J5, J6, J7 |
| 2 | LM317L_SOT-89 | Package_TO_SOT_SMD:SOT-89-3 | U3, U7 |
| 2 | LOGO | theBrutzler:thebrutzler_10mm_mod | G***, G*** |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 16K4 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 31K2 | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 3µ3 | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 4K4 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 50K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | AP62300Z6 | Package_TO_SOT_SMD:SOT-563 | U9 |
| 1 | BMP390_C5124834 | easyeda2kicad:LGA-10_L2.0-W2.0-P0.50-BL | U6 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_EVQP7C | SW1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | ESP32-S2-SOLO-2-N4 | easyeda2kicad:WIRELM-SMD_ESP32-S3-WROOM-1 | U11 |
| 1 | HS96L03W2C03 | easyeda2kicad:OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RESET | Button_Switch_SMD:SW_SPST_EVQP7C | SW2 |
| 1 | SMD7525-16Ω | easyeda2kicad:BUZ-SMD_4P-L7.5-W7.5-BR | BUZZER1 |
| 1 | SW1 | Button_Switch_SMD:SW_SPST_EVQP7C | SW3 |
| 1 | SW2 | Button_Switch_SMD:SW_SPST_EVQP7C | SW4 |
| 1 | SW3 | Button_Switch_SMD:SW_SPST_EVQP7C | SW5 |
| 1 | SW4 | Button_Switch_SMD:SW_SPST_EVQP7C | SW6 |
| 1 | SYMM-ETOH-4 | easyeda2kicad:LCC-8_L3.8-W3.8-P1.27-BL | U2 |
| 1 | SYS05 | easyeda2kicad:SIP-4_L12.0-W5.5-P2.54-L | U8 |
| 1 | TMP102AIDRLR | easyeda2kicad:SOT-563_L1.6-W1.2-P0.50-LS1.6-BR | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | VL53L8CXV0GC/1 | easyeda2kicad:LGA-16_L6.4-W3.0_VL53L5CXV0GC-1 | U4 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
Questions
How big is the SUB tember Titan PCB?
It measures 108.9 × 40.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SUB tember Titan use?
90 parts, built around the ESP32-S2-SOLO-2-N4, AP62300Z6, TMP102AIDRLR(UMW) and VL53L8CXV0GC/1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SUB tember Titan KiCad files?
From the theBrutzler/U-Bootloader repository on GitHub, at the commit this page was made from: the board is SUB-tember_Titan/SUB-tember_Titan.kicad_pcb and its schematic SUB-tember_Titan/SUB-tember_Titan.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SUB tember Titan design in my own project?
Its repository states no licence, so its author keeps all rights: ask theBrutzler before reusing the design.
Similar boards
- 4 layers97 × 37.5 mm
SUMEC MK V Pro
bismarx-v1/Sumec-MiniSumo-HW
SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.
138 parts3 - 2 layers95 × 60 mm
- 2 layers57.1 × 72.6 mm
- 2 layers189.1 × 78.7 mm
- 4 layers135.5 × 25 mm
Obstacle detector
farhanarrafi/embedded-project-website
UNT Embedded Hardware/Software Design Course Report
12 parts - 2 layers124.5 × 46 mm
Digital Clock PCB 2.0 Module Based
CasualCodersProjects/Really-Nice-Digital-Clock
Nice Clock. Mine's Bigger.
77 parts6GPL-3.0 - 2 layers150 × 79.8 mm
