2 layers197 × 249.7 mm
2 layers34 × 99.5 mm
Tach attack
pulcher/tach-attack1- Size
- 34 × 99.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 30
- Pads
- 61
- Tracks, vias
- 46, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Nov 2024
- Updated
- 5 Nov 2024
Overview
Tach attack is an open-source printed circuit board by pulcher, from the pulcher/tach-attack repository on GitHub. It is a 2-layer board of 34 × 99.5 mm with 21 parts on 30 nets, routed with 46 tracks and 0 vias.
It is built around the HS96L03W2C03. Its parts include 3 capacitors, 2 connectors, 2 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 1 | 0.01u | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 100 nF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100u | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | GND | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | HS96L03W2C03 | easyeda2kicad:OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U1 |
| 1 | IR Detector | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J2 |
| 1 | Out | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | VIN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
Questions
How big is the Tach attack PCB?
It measures 34 × 99.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tach attack use?
21 parts, built around the HS96L03W2C03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tach attack KiCad files?
From the pulcher/tach-attack repository on GitHub, at the commit this page was made from: the board is tach-attack/tach-attack.kicad_pcb and its schematic tach-attack/tach-attack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tach attack design in my own project?
Its repository states no licence, so its author keeps all rights: ask pulcher before reusing the design.
Similar boards
- 4 layers51 × 77 mm
- 2 layers42 × 98.1 mm
- 2 layers108 × 65 mm
- 2 layers56.8 × 66.2 mm
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!
14 parts5 - 2 layers60 × 90 mm
Cinder
CircuitGuy943/CinderV2-Filament-Dryer
(🚧) A filament dryer to precede my old one made inside a wooden box that never worked properly and didn't heat anything. Features to be estabilished
40 parts4GPL-3.0 - 4 layers56 × 28 mm
Bx tacho
dazchi/bx-tacho
Open DIY Beyblade X launcher RPM meter: ESP32-C3 with IR sensors and an OLED, Bluetooth (Battle Pass protocol), and a browser app for shot data and firmware updates. KiCad hardware, ESP-IDF firmware, 3D-printed case.
51 parts3GPL-3.0 - 2 layers180 × 110 mm
