2 layers180 × 110 mm
2 layers99.9 × 89.9 mm
Clove
Shadow220108/Clove1A tamagotchi made by me
- Size
- 99.9 × 89.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 33
- Pads
- 120
- Tracks, vias
- 168, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Apr 2026
- Updated
- 6 Oct 2026
Overview
Clove is an open-source printed circuit board by Shadow220108, from the Shadow220108/Clove repository on GitHub. It is a 2-layer board of 99.9 × 89.9 mm with 38 parts on 33 nets, routed with 168 tracks and 13 vias.
It is built around the SK6812MINI-E and HS96L03W2C03. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
HS96L03W2C03
--40℃~+70℃ 0.96 128x64 180cd/m2 21.744x10.864mm I2C Passive (PMOLED) SSD1315 chip White - OLED Display ROHSHSOLED Display
README
README.md
Clove
First ever paw shaped tamagotchi, with 4 buttons, LEDs, screen and battery
| Render |
|---|
 |
The case is made to be paw shaped, designed in two halves which are supposed to be put together with 4 different M3x8mm screws.
It has a slot to hold the battery, 4 screw holes to hold and tighten the PCB! The top case features 4 holes for the buttons and
a space for the screen.
| Zine |
|---|
.png) |
PCB Design
 |
|---|
The PCB is 2 layers with dimensions under 100 by 100mm, it is designed to be in a paw shape has some cool silkscreen with red color, cause red colored PCBs are cool.
All the PCB files are here
| PCB design |
|---|
.png) |
Schematics
Here are the schematic designs,
| Schematics |
|---|
 |
Why was it made?
It was made for fallout hackclub with the amazing guide made by @Tanuki ( huge credits to him )
How you can get one for yourself?
That is pretty easy,
- Order all the parts going through the BOM
- Start by soldering all the components on to the PCB
- Put the buttons in the holes, screw the PCB to the case and screw both the halves together
- Flash the Xiao with firmware and boom
- Start playing with your tamagotchi
BOM
| Product | Description | Quantity | Unit Price | Link | Total cost ( Including Shipping ) |
|---|---|---|---|---|---|
| PCB | to connect and hold all the electronic components | 5 ( MOQ ) | 2$ | Link | 12.31$ |
| Xiao ESP32C6 | MCU for running the screen | 1 | 7.79$ | Link | 8.32$ |
| 0.96" OLED | Main display | 1 | 1.69$ | Link | 2.22$ |
| Tactile Switch buttons (6x6mm) | To control the character | 10 ( MOQ ) | 0.10$ | Link | 0.10$ |
| M3x5mm Heastset Inserts | To hold downt the top and bottom case | 8 | 0.10$ | Link | 1.50$ |
| M3x8mm Screws | To hold downt the top and bottom case | 8 | 0.20$ | Link | 0.20$ |
| Buzzer | to make some sounds | 1 | 0.48$ | Link | 0.48$ |
| LiPo Battery | To power everything! | 1 | 1.65$ | Link | 1.65$ |
| LEDs | They light up | 12 | Self sourced | ||
| Resistors | for the battery voltage | 2 | Self sourced | ||
| Total cost | 26.78 |
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 12 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H1, H2, H2 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 100k, 100K |
| 1 | 0.96" OLED | EasyEDA:OLED-TH_L27.8-W27.2-P2.54_C9900033791 | 0.96" OLED |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BATTERY |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BUZZER |
| 1 | DOWN | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | DOWN |
| 1 | LEFT | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | LEFT |
| 1 | RIGHT | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | RIGHT |
| 1 | UP | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | UP |
| 1 | XIAO-ESP32-C3-SMD | EasyEDA:XIAO-ESP32-C3-DIP-SMD | XIAO-ESP32-C3 |
Questions
How big is the Clove PCB?
It measures 99.9 × 89.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clove use?
38 parts, built around the SK6812MINI-E and HS96L03W2C03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clove KiCad files?
From the Shadow220108/Clove repository on GitHub, at the commit this page was made from: the board is PCB/Clove.kicad_pcb and its schematic PCB/Clove.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clove design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shadow220108 before reusing the design.
Similar boards
- 2 layers197 × 249.7 mm
- 4 layers51 × 77 mm
- 2 layers42 × 98.1 mm
- 2 layers108 × 65 mm
- 2 layers56.8 × 66.2 mm
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!
14 parts5 - 2 layers60 × 90 mm
Cinder
CircuitGuy943/CinderV2-Filament-Dryer
(🚧) A filament dryer to precede my old one made inside a wooden box that never worked properly and didn't heat anything. Features to be estabilished
40 parts4GPL-3.0 - 4 layers56 × 28 mm
Bx tacho
dazchi/bx-tacho
Open DIY Beyblade X launcher RPM meter: ESP32-C3 with IR sensors and an OLED, Bluetooth (Battle Pass protocol), and a browser app for shot data and firmware updates. KiCad hardware, ESP-IDF firmware, 3D-printed case.
51 parts3GPL-3.0