
OpenRX panel rev2.2
OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.
Boards in 27 GitHub repositories, designed in KiCad, that use the U.FL-R-SMT-1(80) by Hirose Electric (-40℃~+90℃ 1 1.25mm 2mm 50Ω 6GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHS). See how each wires it, with its parts, size, README and files; the U.FL-R-SMT-1(80)’s symbol, footprint and pinout are on its own page.

OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.


ties1887/Mesh-radio-Halow-LoRa
Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.

anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor

OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.




eihli/morse-mesh
This is the current hardware source for future Morse Mesh revisions. It is a professionally reviewed redraw of the frozen, fabricated v1 board, not a pin-compatible replacement: notably, KEYIN moved from v1 PA0 to v2…

Korotaa/luxmetter-design_HW-PCB_SW
Le module est un End Device LoRa. C'est un dispositif IoT permettant de mesurer le niveau de luminosité grace au capteur TSL2571 et transmettre ces données à un serveur LoRaWAN (NetWork Serveur + Application Serveur) .

Open-Air-Foundation/pcb-module-ce-card
The CE card adds 4G cellular connectivity (LTE Cat 1) to AirGradient monitors. It can be used in the AirGradient Open Air, the AirGradient ONE, and the Open Air Max.

tetraethylmethane/NIDAR-RescueSwarm
Three autonomous drones that search a flood zone, find survivors, geotag them, and drop medical kits — with no network, no pilot, and one operator who only presses start.

amuzdgp3-prog/im-01-pulse-device
Отдельный модуль к системе обслуживания аппаратов 2.apixspb.ru. Устройство слушает импульсные выходы монетоприёмника и купюроприёмника, копит показания в FRAM и дважды в сутки передаёт их на сервер по LTE Cat.1.

aprskalo1/nano24-elrs-receiver
nano24: compact 2.4 GHz ExpressLRS receiver prototype with ESP32-C3, SX1281, CRSF and a printed Wi-Fi antenna. KiCad sources, BOM, Gerbers and validation notes.


CDonohoe-Designs/EdgeLink_S3_Cellular
EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.

EnAccess/Cicada-WiSUN-HW
IoT Communications Module for Energy Access. A quick way to get production ready, bi-directional communications for your IoT embedded device.

Galacs/esp32s3-poc-devboard
ESP32-S3 based PoC board made to test step-down power supply design, 24v level shifter, crystal circuits and RF circuit
Jotrorox/minicontrol
RP2354A + 868 MHz LoRa (Ai-Thinker Ra-01SH) USB-C controller board, designed in KiCad 10.

KarpelesLab/ledger_implant_detector
A small hand-held tool for spotting extra conductive structures hidden inside the plastic shell of a hardware wallet (e.g. a Ledger).

Mehdi-Ldj/lora-ble-sensor-node
Off-grid LoRa/BLE sensor node — 868 MHz LoRa, 2.4 GHz BLE, solar/LiFePO4


