
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
Boards in 67 GitHub repositories, designed in KiCad, that use the HR911105A by HANRUN (0℃~+70℃ 1 Filtered Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHS). See how each wires it, with its parts, size, README and files; the HR911105A’s symbol, footprint and pinout are on its own page.

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Ottercast/OtterCastAmp
OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.

OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.


nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible


Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.



ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core



elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)

MayaPosch/LEDNip
STM32F427-based developer board with 5 channels for controlling LEDs.



renatorgr/Boards
Hardware and firmware for the AgOpenGPS AiO v4.5 autosteer boards: Teensy 4.1 firmware with its own web page (GPS, IMU, autosteer), a XIAO ESP32 Wi-Fi status page, XIAO adapter boards, and an Arduino Nano sprayer…

Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.


PaulBichl/vibepcb-smu
VibePCB example: 4-quadrant SMU (+-30 V / +-1 A, USB-C PD, Ethernet) designed with an LLM

Rufilla/LuckFox-Core3506-Carrier
A carrier board for the LuckFox 3506 designed in KiCAD 10


UTS-48451-NetworkHub/RJ45-Board
RJ45 PCB for Intel Altera Cyclone IV Development Kit
