
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

RJ45 PCB for Intel Altera Cyclone IV Development Kit
RJ45-Board is an open-source printed circuit board by UTS-48451-NetworkHub, from the UTS-48451-NetworkHub/RJ45-Board repository on GitHub. It is a 4-layer board of 100 × 40 mm with 56 parts on 114 nets, routed with 524 tracks and 20 vias.
It is built around the HR911105A. Its parts include 25 resistors, 20 capacitors, 6 connectors and 5 ICs. It belongs with the fPGA and programmable logic and interfaces and adapters boards and the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C7, C8, C11, C12, C15, C16, C19, C20 |
| 10 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C9, C10, C13, C14, C17, C18 |
| 10 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R9, R10, R14, R15, R19, R20, R24, R25 |
| 10 | 49.9R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R6, R7, R11, R12, R16, R17, R21, R22 |
| 5 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R8, R13, R18, R23 |
| 5 | HR911105A | Connector_RJ:RJ45_Hanrun_HR911105A_Horizontal | J1, J2, J3, J4, J5 |
| 5 | SN65HVD33DR | RS485_Drivers_Custom:D14 | U1, U2, U3, U4, U5 |
| 1 | Conn_02x22_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x22_P2.54mm_Vertical | J10 |

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Ottercast/OtterCastAmp
OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.

OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.


nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible


Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

It measures 100 × 40 mm and has 4 copper layers, 1.62 mm thick.
56 parts, built around the HR911105A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UTS-48451-NetworkHub/RJ45-Board repository on GitHub, at the commit this page was made from: the board is RJ45 Board.kicad_pcb and its schematic RJ45 Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask UTS-48451-NetworkHub before reusing the design.