2 layers79 × 38 mm
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
111 parts587
Ethernet
56 boardsKiCad boards from 28 GitHub repositories tagged “ethernet”, the most starred first; open any of them in PCBKit.
- 2 layers50.3 × 50.3 mm
Throwing star
greatscottgadgets/throwing-star-lan-tap
A passive tap for monitoring 10/100 Ethernet.
7 parts151 - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers26.9 × 73.9 mm
WS2812ControllerEthernet
klein0r/pcb-ws2812-ethernet-controller
Ethernet Controller for WS2812 LED Stripes
12 parts38MIT - 4 layers100 × 100 mm
ETH OPAMP DCMI FSMC CAN ENCODER CS1000
DanielMartensson/STM32-Ethernet-Camera
PCB board with camera and ethernet connection + CAN-bus
144 parts16MIT - 2 layers87 × 47 mm
- 2 layers63.5 × 45.7 mm
Fathom x
bluerobotics/fathom-x
Ethernet capable tether interface board for the Fathom tether.
25 parts5MIT - 2 layers87.9 × 55.4 mm
- 2 layers123 × 91.6 mm
Matt poe prototype
mhardeman/matt-poe-prototype
PoE Powered Device (PD) Prototype Schematic & PCB design in KiCad for 12V & 5V output rails
56 parts5 - 2 layers66.3 × 40 mm
Hexpansion
DanNixon/ethernet-hexpansion
W5500 based Ethernet and PoE hexpansion for the Tildagon badge.
23 parts4CERN-OHL-P-2.0 - 2 layers50.4 × 50.4 mm
Bluepill ethernet
kellerkindt/bluepill_sensor
Bluepill stm31f103 ethernet sensor extension board with SW written in Rust
47 parts3Apache-2.0 - 4 layers70.7 × 66.5 mm
- 4 layers42.1 × 72 mm
- 2 layers56.8 × 22.8 mm
- 2 layers40.6 × 26.2 mm
Easy artnet interface
EricNakamura/easy-artnet-interface
A open-source project aiming to give access to all people a low budget and easy-to-use artnet-dmx interface node
14 parts1GPL-3.0 - 4 layers255.9 × 224.5 mm
Central control unit
RomLab/pcb-system-for-underfloor-heating-v2.0
PCB for underfloor heating system
1,880 parts1 - 4 layers89.7 × 66 mm
Luckfox core3506 adapter
Rufilla/LuckFox-Core3506-Carrier
A carrier board for the LuckFox 3506 designed in KiCAD 10
131 parts1Apache-2.0 - 4 layers100 × 40 mm
RJ45-Board
UTS-48451-NetworkHub/RJ45-Board
RJ45 PCB for Intel Altera Cyclone IV Development Kit
56 parts1 - 2 layers90 × 70 mm
STM32 Industrial Edge Gateway v0.2.0
An4s0/STM32-Industrial-Edge-Gateway
Embedded industrial edge gateway for environmental monitoring. Features Modbus RTU over RS485, real-time US EPA AQI computation, FatFs microSD CSV logging, and an embedded lwIP Ethernet web dashboard.
90 parts - 4 layers100 × 50 mm
Pcm5102a mux board
cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip
86 parts - 2 layers101.6 × 53.3 mm
ArduinoMega Ethernet
dmanla/SecureConnectivityDevelopmentPlatform
A development platform which provides secure connectivity and data logging support while maintaining compatibility with Arduino-Mega hardware and software.
116 parts - 4 layers90 × 66 mm
Iron node
enkhbold470/iron-node
ESP32-S3 industrial gateway: W5500 Ethernet, isolated RS-485 (ADM2587E), CAN, 9-36 V input. 4-layer KiCad 10 board.
83 partsCERN-OHL-S-2.0 - 2 layers51.8 × 47.5 mm
Ethernet
Erhannis/LaserEthernet
Cleanup and manufacture-prep of http://blog.svenbrauch.de/2017/02/19/homemade-10-mbits-laser-optical-ethernet-transceiver, license CC-BY-SA-NC 4.0
79 parts - 2 layers19.1 × 34.9 mm
RJ45
mignon-p/EthernetBreakout
A small breakout board for an Ethernet jack with magnetics.
3 partsCC-BY-SA-4.0