Skip to the content

Boards using the D3V3XA4B10LP

50 boards

Boards in 45 GitHub repositories, designed in KiCad, that use the D3V3XA4B10LP by Diodes Incorporated (-55℃~+150℃ 0.35pF 1uA 24W@8/20us 3.3V 4A@8/20us 9.4V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 UDFN2510-10 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the D3V3XA4B10LP’s symbol, footprint and pinout are on its own page.

  • 4 layers26 × 46.5 mmDay 02 Four Port USB C, the printed circuit board in 3D

    Day 02 Four Port USB C

    i2cjak/Framework_Expansion_Cards

    In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

    54 parts95CERN-OHL-P-2.0
  • 4 layers170.1 × 100 mmLattePandaMu carrier custom, the printed circuit board in 3D

    LattePandaMu carrier custom

    futureshocked/kicad_latte_panda_mu

    A custom carrier-board reference design for the LattePanda Mu compute module, used as a worked example in the Tech Explorations KiCad course:

    220 parts4
  • 4 layers40 × 40 mmSTM Board V3, the printed circuit board in 3D

    STM Board V3

    Tay0710/Design_S1_006

    This project integrates hardware, firmware, and design elements to develop a fully functional autonomous 3D mapping drone system.

    46 parts3
  • 4 layers25.4 × 62.7 mmESP32 Board, the printed circuit board in 3D

    ESP32 Board

    Fred98246/ESP-32-Dev-Board

    Custom ESP32-S3-MINI-1 development board

    27 parts2MIT
  • 4 layers170.1 × 100.5 mmLattePandaMU carrier custom 20260226, the printed circuit board in 3D

    LattePandaMU carrier custom 20260226

    tuankoko567/LattePanda-MU-carrier-Board

    Designing high-speed carrier board using KiCad, applying differential pair routing and length matching, studying impedance control and PCB stack-up planning, learning signal integrity and EMI-aware layout techniques.

    213 parts2
  • 4 layers26.4 × 50.8 mmIOT, the printed circuit board in 3D

    IOT

    yuanyong2024/IoT-feather

    a IoT evb board that based on Quectel BG95 modem and in adafruit feather form factor

    111 parts2
  • 4 layers34 × 50 mmESP32 Controller, the printed circuit board in 3D

    ESP32 Controller

    caggieb/ESP32-controller-WIP

    Design of an ESP32 based controller with IMU, from PCB to software

    36 parts1
  • 2 layers22 × 48.8 mmQuick Hack, the printed circuit board in 3D

    Quick Hack

    ctayupanta/DONGLE-ESP32-C3

    26 parts1
  • 4 layers79.9 × 80 mmVidyut, the printed circuit board in 3D

    Vidyut

    D-Coder-42/Vajra-Team-Indra

    All codes and files for Team B of thrustMIT subscale

    94 parts1MIT
  • 4 layers250 × 100 mmFreEDrum, the printed circuit board in 3D

    FreEDrum

    Gemuesesaft/freEDrum

    Open source EDrum trigger module

    492 parts1GPL-3.0
  • 4 layers26.4 × 56.8 mmESP32 Dev module, the printed circuit board in 3D

    ESP32 Dev module

    andresmoreno2702-gif/ESP32-S3-Dev-Board-Project

    All KICAD Files and Schematics

    26 partsMIT
  • 2 layers25 × 38 mmESP32 S3, the printed circuit board in 3D

    ESP32 S3

    AngelGonz25/Electiva-Mecatr-nica

    13 parts
  • 4 layers65.5 × 42.2 mmUSB thumb drive, the printed circuit board in 3D

    USB thumb drive

    Arhamee/hardware-portfolio

    Multi-layer PCB designs in KiCad 10 schematic capture to fabrication-ready Gerbers. High-speed routing, BGA escape, power electronics.

    126 partsMIT
  • 4 layers71 × 21.6 mmEMGAmplifier, the printed circuit board in 3D

    EMGAmplifier

    Arjun-Mahes/EMGAmplifier

    made an EMG amplifier PCB from scratch that streams filtered raw and enveloped outputs wirelessly using an ESP32

    63 parts
  • 2 layers105 × 105 mmGW A, the printed circuit board in 3D

    GW A

    ayaxan7/SolarAlert

    SolarAlert is a compact embedded hardware project designed to monitor the health and performance of solar panels.

    97 parts
  • 4 layers169 × 98.9 mmCustom Latte Panda Mu Lite Carrier Board, the printed circuit board in 3D

    Custom Latte Panda Mu Lite Carrier Board

    BBIkal/Custom_LattePandaMu_Carrier_Board_Project

    4-layer high-speed carrier board for the LattePanda Mu Intel N100 compute module, designed in KiCad.

    217 parts
  • 2 layersEsp32 pcb, the printed circuit board in 3D

    Esp32 pcb

    bobbobdude/AF1_Runiom_Project

    I'm thinking that this repo can be a collection of everything we are up to with code, PCB design, 3D models and also general planning.

    26 parts
  • 4 layers25.8 × 63 mmCustom ESP32 S3 Mini, the printed circuit board in 3D

    Custom ESP32 S3 Mini

    ChitranshChiranjeev/Custom-ESP32-S3-Mini-PCB-using-KiCad

    4-layer ESP32-S3-MINI PCB designed in KiCad with USB Type-C differential routing, LDO power regulation, temperature/humidity sensing, RGB LED, and USB protection circuitry.

    26 parts
  • 4 layers56 × 36 mmController, the printed circuit board in 3D

    Controller

    Debanx3/Drishtikon

    EdgeAI based human detection system for automated control of resistive and inductive loads at workspaces

    44 partsMIT
  • 2 layers54 × 85 mmGuardian Sense, the printed circuit board in 3D

    Guardian Sense

    ficosta/Guardian-Sense

    Guardian-Sense is a versatile hardware project based on the ESP32-S3, designed to monitor environmental conditions and provide real-time data to Zabbix.

    38 parts
  • 4 layers63.7 × 41.1 mmKiCad Advanced Design a smart USB thumb drive, the printed circuit board in 3D

    KiCad Advanced Design a smart USB thumb drive

    gorkemguven/RP2040-Dual-TypeC-eMMC-Board

    A 4-layer embedded development board featuring RP2040, USB2244 high-speed eMMC bridge, dual Type-C ports, and INA226/TMP119 power & telemetry monitoring.

    133 partsMIT
  • 4 layers25.5 × 62.8 mmAqproto, the printed circuit board in 3D

    Aqproto

    HOUXA8/aqproto

    Personal Project

    31 parts
  • 4 layers26 × 30 mmImu board, the printed circuit board in 3D

    Imu board

    i2cjak/imu_board

    framework imu board for motion sickness HEALING

    19 parts
  • 2 layers71.1 × 30.5 mm445project, the printed circuit board in 3D

    445project

    jklee341/ece445_project

    Rodent deterrent and classification system

    33 parts