2 layers125.8 × 52.6 mm
Platy
harshthorat-cpu/PLATYPULSE
Understanding and experimenting with different wireless communication technologies often requires multiple dedicated tools, modules, and software environments.
95 parts
2 layers54 × 85 mm
Guardian Sense
ficosta/Guardian-SenseGuardian-Sense is a versatile hardware project based on the ESP32-S3, designed to monitor environmental conditions and provide real-time data to Zabbix.
- Size
- 54 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 51
- Pads
- 158
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Jan 2025
- Updated
- 7 Jan 2025
Overview
Guardian Sense is an open-source printed circuit board by ficosta, from the ficosta/Guardian-Sense repository on GitHub. It is a 2-layer board of 54 × 85 mm with 38 parts on 51 nets.
It is built around the ESP32-S3-WROOM-1-N8, BME280 and AMS1117-3.3, with the D3V3XA4B10LP, WS2812B and BC847 among its other parts. Its parts include 11 capacitors, 11 resistors, 4 ICs, 4 diodes and 2 switches. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
D3V3XA4B10LP
UDFN2510-10-55℃~+150℃ 0.35pF 1uA 24W@8/20us 3.3V 4A@8/20us 9.4V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 UDFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdGuardianSense
GuardianSense is a versatile hardware project based on the ESP32-S3, designed to monitor environmental conditions and provide real-time data to Zabbix. This board is compact yet powerful, integrating multiple sensors for a wide range of applications, including data centers, smart homes, and industrial environments.
Features
- Core Module: ESP32-S3-WROOM-1 for Wi-Fi and BLE connectivity.
- Environmental Sensors:
- Temperature and Humidity (BME280)
- Smoke Detection (MQ-2)
- Light Intensity (BH1750)
- Presence Detection (AM312 PIR Sensor)
- Vibration Monitoring (LDT0-028K)
- Noise Level Monitoring (MAX9814)
- Indicators:
- Status LED (Single color)
- RGB LED (SK6812-MINI-E)
- Connectivity:
- USB-C for power and data
- Multiple GPIOs for additional customizations
- Power Management:
- Integrated voltage regulator for 3.3V operation.
Firmware
The firmware for GuardianSense is tailored to interact with Zabbix, providing seamless integration with this monitoring platform. It supports real-time data transmission for:
- Temperature and humidity
- Smoke and gas levels
- Light intensity
- Vibration and noise detection
Usage
-
Clone this repository:
bash git clone https://github.com/ficosta/Guardian-Sense.git -
Install KiCad for hardware design modifications (optional).
-
Flash the firmware to the ESP32-S3 module.
-
Configure Zabbix to accept incoming data from the board.
KiCad Design Files
All hardware design files for GuardianSense are included in the /hardware directory. Make sure to follow the project's .gitignore for KiCad files when contributing.
Contributing
Contributions are welcome! Please ensure that any hardware or firmware changes align with the project's goals.
License
See the LICENSE file for more details.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C7, C8, C9, C10, C11 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R9, R10, R11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 2 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | Conn_01x03_Pin AM312 Module | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | D3V3XA4B10LP | Package_DFN_QFN:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SS14 | Diode_SMD:D_SMA | D4 |
Similar boards
- 2 layers50.6 × 71.1 mm
Open ESPilot
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
109 parts18CERN-OHL-W-2.0 - 2 layers110 × 120 mm
Home Automation
ANSHUMANDOCX/Home-Automation
Its a Sever based 6 channel Home automation module + Temperature and humidity sensor made using esp32 s3
119 parts - 4 layers62.5 × 44.5 mm
Esp32s3-plant monitor
MuffinByteLabs/esp32s3-plant-monitor
Portfolio PCB: ESP32-S3 Wi-Fi plant monitor. 4-layer KiCad 10 design, fabricated and assembled at JLCPCB — schematic, reviews and the frozen manufacturing package all readable in-browser.
70 parts3CERN-OHL-P-2.0 - 4 layers60 × 80 mm
Wisp
huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.
91 partsMIT - 2 layers162 × 60 mm
Air detector
shm-dmitry/air-detector
Air status sensor with hass integration and fan control
132 partsApache-2.0 - 2 layers75.5 × 71 mm
- 4 layers90.5 × 67 mm
AS 4
beaked99/air-scales
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16.
131 parts
Questions
How big is the Guardian Sense PCB?
It measures 54 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Guardian Sense use?
38 parts, built around the ESP32-S3-WROOM-1-N8, BME280, AMS1117-3.3 and D3V3XA4B10LP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Guardian Sense KiCad files?
From the ficosta/Guardian-Sense repository on GitHub, at the commit this page was made from: the board is hardware/GuardianSense.kicad_pcb and its schematic hardware/GuardianSense.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Guardian Sense design in my own project?
Its repository states no licence, so its author keeps all rights: ask ficosta before reusing the design.