
I2c sensor board
Okanagan-Marine-Robotics/Electrical
Repo For Electrical pcbs and documentation

Repo For Electrical pcbs and documentation
Esp mobo is an open-source printed circuit board by Okanagan-Marine-Robotics, from the Okanagan-Marine-Robotics/Electrical repository on GitHub. It is a 2-layer board of 75.5 × 71 mm with 83 parts on 87 nets, routed with 854 tracks and 58 vias.
It is built around the 74AHCT125D, ESP32-DEVKITC-VE and TMCS1100A2QDRQ1, with the BME280, BMI088 and WS2812B among its other parts. Its parts include 26 resistors, 13 connectors, 12 capacitors, 12 ICs and 8 diodes. It belongs with the ESP32 boards of this library.
Repo For Electrical pcbs and documentation
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 11 | Conn_01x03_Pin | ConnectorSmallCourtyard:PinHeader_1x03_P2.54mm_Vertical_small_courtyard | J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15 |
| 6 | 100nf | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C8, C9 |
| 6 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5, D6, D7 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R23, R24 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 20K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R25, R26 |
| 3 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | I2CMot1, J3, J17 |
| 3 | LM4030-2.5 | Package_TO_SOT_SMD:SOT-23-5 | U7, U9, U12 |
| 3 | TMCS1100A2QDR | TMCS1100:SOIC8_D_TEX | U6, U8, U11 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C10 |
| 2 | PC847 | Package_DIP:DIP-16_W7.62mm | U3, U4 |
| 2 | Polyfuse | Fuse:Fuse_Bourns_MF-RG300 | F1, F2 |
| 2 | SS14 | Diode_SMD:D_SMA | D1, D8 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J2, J16 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 74AHCT125 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | BMI088 | BMI088:QFN_BMI085_BOS | U10 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | Sensor Bus1 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |

Okanagan-Marine-Robotics/Electrical
Repo For Electrical pcbs and documentation

Okanagan-Marine-Robotics/Electrical
Repo For Electrical pcbs and documentation

antmicro/gpu-cluster-backplane
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.

antmicro/d1600e-psu-breakout
Breakout board for DELL D1600E-S0 Power Supply Unit

leodk27/Reflow-oven-Custom
Reflow oven project based on custom PCB and programming

OA-Designs/LED-TILE
Modular decorative LED tiles in multiple shapes (hex, square, triangle...) sharing one PCB design. Tiles connect edge-to-edge to share power and sync lighting effects across a network.

ficosta/Guardian-Sense
Guardian-Sense is a versatile hardware project based on the ESP32-S3, designed to monitor environmental conditions and provide real-time data to Zabbix.

Oxmose/EConBadge
E-Ink Convention Badge | Connected badge to display your favorite images and texts at convention.

koolcat6666/Engine-Simulator-2.0
Engine simulator for ECU testing based on ESP32-32U DevKitC. The system connects to the ECU through the standard Speeduino 40-pin IDC connector and generates signals to simulate real engine operation.

PaoloJN/openchess
A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.
It measures 75.5 × 71 mm and has 2 copper layers, 1.6 mm thick.
83 parts, built around the 74AHCT125D, ESP32-DEVKITC-VE, TMCS1100A2QDRQ1 and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Okanagan-Marine-Robotics/Electrical repository on GitHub, at the commit this page was made from: the board is esp_mobo/esp_mobo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Okanagan-Marine-Robotics before reusing the design.