

All codes and files for Team B of thrustMIT subscale
- Size
- 79.9 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 160
- Pads
- 446
- Tracks, vias
- 379, 65
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Jan 2025
- Updated
- 7 Mar 2025
Overview
Vidyut is an open-source printed circuit board by D-Coder-42, from the D-Coder-42/Vajra-Team-Indra repository on GitHub, published under the MIT licence. It is a 4-layer board of 79.9 × 80 mm with 94 parts on 160 nets, routed with 379 tracks and 65 vias.
It is built around the ESP32-S3-MINI-1U-N8, ESP32-S3-WROOM-1U-N16R8 and MPXV5100DP, with the AMS1117-3.3, D3V3XA4B10LP and IRLR7843TRPBF among its other parts. Its parts include 30 capacitors, 15 ICs, 11 resistors, 11 connectors and 7 diodes. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S3-MINI-1U-N8
VFQFN-56-EP-40℃~+105℃ -98.4dBm 1.8V~3.6V、3V~3.6V 2.4GHz 21dBm 340mA 88mA Bluetooth5.0 ESP32-S3 UART、SDIO、SPI、I2C、I2S、JTAG、USB VFQFN-56-EP WiFi Modules ROHSEspressif SystemsWiFi ModulesESP32-S3-WROOM-1U-N16R8
SMD,19.2x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3R8 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMPXV5100DP
SOT-1693-40℃~+125℃ 0Kpa~1bar 1ms 5V SOT-1693 Pressure Sensors ROHSNXP SemiconductorsPressure SensorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsD3V3XA4B10LP
UDFN2510-10-55℃~+150℃ 0.35pF 1uA 24W@8/20us 3.3V 4A@8/20us 9.4V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 UDFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)IRLR7843TRPBF
TO-252140W 161A 2.3V@250uA 3.3mΩ@10V,15A 30V N-Channel DPAK MOSFETs ROHSInfineon TechnologiesMOSFETsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIIM-42653
LGA-14UncategorisedTDK InvenSenseRYLR993
SMDUncategorisedREYAX
README
README.mdProject Vajra
By Team Indra
Table of Contents
Team Members
- Shaurya Mittal - Aerodynamics Member
- Shaunak Purkayastha - Propulsion Member
- Tushit Chatterjee - Structures Member
- Krishanu Dey - Avionics Member
- Dhruv Phalod - Avionics Member
- Vanshdeep Trivedi - Avionics Member
- Mutra Sai Tharun - Payload Member
- Rudra Rajpurohit - Payload Member
- Swaraa Sule - Management Member
- Adithya Adiga - Management Member
Project Abstract
Team Indra’s rocket, Vajra, is powered by an N3452 N-class SRAD rocket motor. Its internal frame is made from Aluminum 6061, and the aerodynamic structure combines Carbon Fibre and Glass Fibre for optimal performance. The nosecone houses a CanSat payload with a GIMBAL-controlled platform, attached via springs to withstand rocket vibrations. An onboard microcontroller ensures the platform is positioned to keep a PYRAMID object aligned with the camera’s center for tracking the entire flight. The avionics use Surface Mount Technology (SMT) components, with two microcontrollers handling tasks like data logging, apogee detection, recovery control, and airbrake activation. The flight computer supports real-time telemetry up to 16 kilometers, transmitting flight dynamics and GPS data.
Team Introduction
Team Indra is a student-run rocketry team based in Manipal, India. We are named after one of the mightiest and strongest gods in Hindu mythology. With access to state-of-the-art resources and immense hard work, our diverse and talented team is exceptionally equipped to tackle the complex engineering challenges of rocketry. Our mission is to create a fully functional sounding rocket that reaches a height of 10,000 feet. We are dedicated to using our collective creativity and determination to fulfill our purpose and further develop groundbreaking solutions that advance the field of aerospace engineering.
Goals
- Develop a fully functional sounding rocket.
- Achieve a flight altitude of 10,000 feet.
- Innovate in the fields of aerodynamics, propulsion, and avionics.
All codes and files for Team B of thrustMIT subscale are included in this repository.
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP8, TP12, TP14, TP16, TP17, TP18 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C11, C20, C22, C26, C30 |
| 7 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3, J4, J5, J6, J8, J9, J11 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C19, C21, C24, C28 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C6, C10, C23, C25, C32 |
| 5 | 220 | Resistor_SMD:R_0805_2012Metric | R2, R7, R8, R10, R12 |
| 5 | 22pF | Capacitor_SMD:C_0805_2012Metric | C13, C14, C16, C17, C18 |
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R9 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C8, C15 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C9, C31 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 47nH | Inductor_SMD:L_0805_2012Metric | L2, L3 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U12 |
| 2 | D | Diode_SMD:D_0805_2012Metric | D5, D7 |
| 2 | D3V3XA4B10LP | Package_DFN_QFN:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U3, U13 |
| 2 | IRLR7843TRPBF | Subscale B:IRLR7843TRPBF | U7, U10 |
| 2 | MPXV5100DP | Subscale B:MPXV5100DP | IC1, IC2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1, J7 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1.8nH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 22 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U8 |
| 1 | ESP32-S3-MINI-1U | RF_Module:ESP32-S2-MINI-1U | U15 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | Subscale B:ESP32-S3-WROOM-1U | U5 |
| 1 | IIM-42653 | Subscale B:IIM-42652_TDK | U2 |
| 1 | LOGO | Subscale B:indra | G*** |
| 1 | LOGO | Subscale B:vidyut | G*** |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J2 |
| 1 | RYLR993 | Subscale B:RYLR993 | U9 |
| 1 | U.FL-R-SMT-1_10_ | Subscale B:RYLR993 Antenna connector | J10 |
| 1 | ~ | Subscale B:M20050 GPS | U6 |
| 1 | ~ | Subscale B:LPS22HHTR_3 | U4 |
More from D-Coder-42/Vajra-Team-Indra
1- 2 layers74.5 × 39.5 mm

Similar boards
- 2 layers115 × 159 mm

- 4 layers33 × 90 mm

Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT - 4 layers127 × 127 mm

- 4 layers75 × 38.6 mm

HuffAndPuff
dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.
149 parts - 2 layers76 × 91 mm

Meniscus controller
EdSmithe/meniscus-controller
Closed-loop meniscus pressure controller for inkjet printing: custom KiCad PCB, Arduino control firmware, Python GUI
10 parts - 4 layers67.7 × 97.2 mm

- 4 layers71.9 × 91 mm

Klipper
tobetter/3DPrinterShield
"3D Printer Shield" is a board to run 3D printer using ODROID single board computer, technically this board is designed to control the motor driver modules with TMC2209 (UART) or TMC2130 (SPI) through the on-board GPIO…
111 parts4GPL-3.0 - 2 layers136 × 88 mm

Questions
How big is the Vidyut PCB?
It measures 79.9 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vidyut use?
94 parts, built around the ESP32-S3-MINI-1U-N8, ESP32-S3-WROOM-1U-N16R8, MPXV5100DP and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vidyut KiCad files?
From the D-Coder-42/Vajra-Team-Indra repository on GitHub, at the commit this page was made from: the board is Avionics/Vidyut PCB Files/Vidyut_SubscaleB/Vidyut.kicad_pcb and its schematic Avionics/Ignition System PCB/JB93.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vidyut design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).