4 layers79.9 × 80 mm
Overview
The MPXV5100DP is a pressure Sensor made by NXP Semiconductors in a SOT-1693 package with 8 pins. -40℃~+125℃ 0Kpa~1bar 1ms 5V SOT-1693 Pressure Sensors ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MPXAZ6115AP117, from EasyEDA) and its footprint (EasyEDA_Cloud:SENSOR-SMD_MPXV5050DP, from EasyEDA), ready for a KiCad board. 24 are in stock at JLCPCB (part C5202490). 6 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
6- Supply, least
- 4.75 V · VS, recommended operating min · p. 5
- Supply, most
- 5.25 V · VS, recommended operating max · p. 5
- Works from
- -40 °C · TA, operating temperature min · p. 5
- Works up to
- 125 °C · TA, operating temperature max · p. 5
- Takes working
- 7 mA · VS, supply current typical at 5 V, 25 °C · p. 5
- Takes at most
- 10 mA · VS, supply current max at 5 V, 25 °C · p. 5
What it is and has
2- Accuracy
- 2.5% maximum error over 0 to 85 °C · p. 1
- Sensing element
- Silicon shear stress strain gauge · p. 1
Specifications
15| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Maximum pressure Pmax | max 400 kPa | 5 | |
| Storage temperature Tstg | min -40 · max 125 °C | 5 | |
| Operating temperature TA | min -40 · max 125 °C | 5 | |
| Pressure range(1) POP | Gauge, differential: MPX5100G/MPXV5100G | min 0 · max 100 kPa | 5 |
| Supply voltage(2) VS | TA = 25 °C | min 4.75 · typ 5 · max 5.25 VDC | 5 |
| Supply current IO | VS = 5 Vdc, TA = 25 °C | typ 7 · max 10 mAdc | 5 |
| Minimum pressure offset VOFF | 0 to 85 °C; VS = 5.0 V | min 0.088 · typ 0.2 · max 0.313 VDC | 5 |
| Full-scale output(4), differential and absolute (0 to 85 °C) VFSO | Differential; VS = 5.0 V; 0 to 85 °C | min 4.587 · typ 4.7 · max 4.813 VDC | 5 |
| Full-scale Span(5), differential and absolute (0 to 85 °C) VFSS | Differential; VS = 5.0 V; 0 to 85 °C | typ 4.5 VDC | 5 |
| Accuracy(6) — | Maximum error ±2.5 %VFSS | max 2.5 %VFSS | 5 |
| Sensitivity V/P | VS = 5 Vdc, TA = 25 °C | typ 45 mV/kPa | 5 |
| Response time(7) tR | VS = 5 Vdc, TA = 25 °C; 10% to 90% of final output following a pressure step | typ 1 ms | 5 |
| Output source current at full-scale output IO+ | VS = 5 Vdc, TA = 25 °C | typ 0.1 mAdc | 5 |
| Warm-up time(8) — | VS = 5 Vdc, TA = 25 °C; after pressure has stabilized | typ 20 ms | 5 |
| Offset stability(9) — | Typical deviation ±0.5 %VFSS; 1000 hours of pulsed pressure, temperature cycling with bias test | typ 0.5 %VFSS | 5 |
Ordering codes, by the datasheet
1- MPXV5100DP
- 98ASA99255D · Small outline package; dual ports; differential pressure; tray shipping · p. 1
Parameters
8- Current - Supply
- 7mA
- Current - Supply(Max)
- 10mA
- Features
- On-chip temperature compensation
- Module
- Yes
- Operating Temperature
- -40℃~+125℃
- Pressure range
- 0Kpa~1bar
- Response time
- 1ms
- Voltage - Supply
- 4.75V~5.25V
Order codes
1- MPXV5100DPLCSC C5202490
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | DNC | Unspecified |
| 2 | VS | Unspecified |
| 3 | GND | Unspecified |
| 4 | VOUT | Unspecified |
| 5 | DNC | Unspecified |
| 6 | DNC | Unspecified |
| 7 | DNC | Unspecified |
| 8 | DNC | Unspecified |
Open-source boards using it
All 6- 4 layers75 × 38.6 mm
HuffAndPuff
dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.
149 parts - 2 layers76 × 91 mm
Meniscus controller
EdSmithe/meniscus-controller
Closed-loop meniscus pressure controller for inkjet printing: custom KiCad PCB, Arduino control firmware, Python GUI
10 parts - 4 layers67.7 × 97.2 mm
- 2 layers115 × 159 mm
- 2 layers102 × 95 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/nxp/MPXV5100DP" title="MPXV5100DP in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/nxp/MPXV5100DP.jpg" alt="MPXV5100DP" width="1200" height="900">[](https://pcbkit.io/parts/nxp/MPXV5100DP)Questions
Is there a KiCad symbol and footprint for the MPXV5100DP?
Yes. The symbol is EasyEDA_Cloud:MPXAZ6115AP117 and the footprint EasyEDA_Cloud:SENSOR-SMD_MPXV5050DP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MPXV5100DP?
SOT-1693, with 8 pins. Its footprint is drawn on this page.
Where is the MPXV5100DP datasheet?
NXP Semiconductors publishes it: the Datasheet link on this page opens it.
Where can I order the MPXV5100DP?
JLCPCB lists it as part C5202490, with 24 in stock; the sellers' links on this page open their listings.
What can replace the MPXV5100DP?
Parts like it in the library: the MPXV5050DP by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MPXV5100DP?
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
